Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

How to fix

How to fix Wi-Fi that keeps dropping out

Find out whether the drop is your device, your Wi-Fi or the NBN connection behind it, then work through the fixes in order: placement, updates, channels, band steering and device settings.

  • Moderate
  • 30 to 60 minutes
  • 4 min read

Rather we fix it? Usually a single visit at our Mitchell workshop, with a fixed quote first.

Open 7 days, 9 am to 8 pm
“Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.”
ruth d., Google review
A home router on a hallway table with one amber warning light glowing, its power cable and a fibre cable plugged in

Key takeaways

  • First work out what's dropping: one device, every device, or the internet behind a Wi-Fi connection that stays up.
  • Steady NBN box lights while everything drops points at the router. Red, amber, flashing or dark lights point at the connection.
  • Routers in cupboards, garages and behind the TV overheat and lose signal. Moving one is the free fix.
  • 5 GHz networks on radar-shared DFS channels can vanish for a minute or more. Channels 36 to 48 never have to.
What you’ll need: Your router's login details, usually on its sticker, A laptop and a network cable for a wired test, Your internet provider's phone number, A note of when and where it drops.

Rather we just fix it?

Wi-Fi in every room, the granny flat and the deck, designed from measurements of your actual house.

Wi-Fi and mesh1300 224 027

Try these fixes, in order

Start at the top. Most problems are solved in the first few steps. Tick them off as you go.

Stop and call us if: none of these work, the fault is probably hardware. Our wi-fi and mesh service picks up where this guide stops.

Why does my Wi-Fi keep dropping?

When it drops, who it drops for and what the NBN box is doing usually points straight at the cause.

What you noticeLikely causeThe fix
What you noticeEverything drops at once, NBN box lights changeLikely causeNBN connection or line faultThe fixCall your provider with photos of the lights
What you noticeEverything drops, NBN lights stay steadyLikely causeRouter overheating, crashing or out of dateThe fixMove it into the open, update it, replace it if old
What you noticeDrops only in far rooms or upstairsLikely causeWeak signal at the edge of coverageThe fixMove the router, or add mesh with wired backhaul
What you notice5 GHz vanishes for a minute, then returnsLikely causeRouter vacating a DFS channel for radarThe fixFix 5 GHz on channel 36 to 48
What you noticeOne laptop drops, everything else is fineLikely causeAdapter power saving or an old driverThe fixUpdate the driver, turn off adapter power saving
What you noticeSmart plugs and cameras keep going offlineLikely cause2.4 GHz-only devices confused by band steeringThe fixGive them a separate 2.4 GHz network
What you noticeDrops whenever the microwave runsLikely causeInterference on 2.4 GHzThe fixUse 5 GHz nearby, move the router away
What you noticeMesh app rates a node's link as weakLikely causeNode too far from the one before itThe fixMove it closer, or wire the backhaul

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Tried these and still stuck?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, and tells you whether it’s worth bringing in before you travel.

We only use your number to call you about this.

What the repair looks like

Drag the handle to compare. This kind of fault, before and after on the bench.

After: under-desk cables, tidiedBeforeAfter
Under-desk cables, tidied Cables run, tied and off the floor.
minimum radar check before a router can use a DFS channel
60 sec
a DFS channel stays off-limits after radar is detected
30 min
the usual set of 2.4 GHz channels that don't overlap
1, 6, 11
on-site visit, first hour, then 30-minute blocks
$189
Exploded technical drawing: wi-fi in every room

Wi-Fi in every room

Where mesh nodes go in a typical Canberra home.

  • RouterMoved out of the cupboard where possible.
  • Mesh nodesOne per floor or zone, ideally wired back.Drawn in red: where we focus first
  • Brick and foilThe walls that block signal in older homes.
  • Outdoor reachGranny flats, studios and the backyard.

Why Wi-Fi drops out

Wi-Fi fails gradually before it fails completely. As the signal weakens, router and device step down to slower rates, resend lost packets and eventually give up.

A phone quietly switches to mobile data, which is why laptops, smart TVs and cameras often show the problem first. Distance is only part of it: what the signal passes through matters more.

  • Double brick and old plaster

    In established suburbs across the inner north, the inner south and Woden, these soak up 5 GHz in particular.

  • Concrete slabs

    Between levels in split-level and two-storey homes, they block signal going up and down.

  • Foil-backed insulation, Low-E glass and metal cladding

    In newer builds these reflect the signal, which can leave a backyard or a granny flat with nothing.

Device, Wi-Fi or NBN: which one is dropping?

Two pings running side by side tell them apart: one to your router, one to an address on the internet such as 1.1.1.1.

Swipe to compare

The deviceThe Wi-FiThe NBN connection
Who loses connectionOne phone or laptopSeveral devices, often in certain roomsEvery device at once, wired ones too
Ping to the routerFails on that device onlyFails, or spikes into hundreds of msStays steady
Ping to 1.1.1.1Fails with the router pingFails with the router pingFails while the router ping holds
NBN box lightsNormalNormalRed, amber, flashing or off
Router log showsNothing unusualClients disconnecting, DFS or radar eventsWAN down or link lost
Fixed with a free setting changeUsuallySometimesRarely
Who sorts it outYou, often in minutesYou, or us with a mesh installYour provider, with your notes and photos

A healthy home network answers a ping to the router in a few milliseconds. Regular spikes into the hundreds, or timeouts, are a Wi-Fi problem, not an internet one.

Where the router lives

A router moved out of a cabinet onto a high, open shelf. It's often the first change we make, and it costs nothing.
A router moved out of a cabinet onto a high, open shelf. It's often the first change we make, and it costs nothing.

In many newer homes the NBN box went in the garage, so the Wi-Fi starts at one end of the house, in the room that gets hottest in January and coldest in July.

Routers run warm even in a good spot. Shut in a cabinet or a garage, they throttle their radios, drop clients and crash.

Fixes for dropouts compared

What each option really fixes, from free to a proper install.

Swipe to compare

Move the routerMesh, wireless backhaulOur pickMesh or access points, wiredFaster NBN plan
Fixes far-room dropoutsPartial
Copes with double brick and slabsPartial
Speed in the far roomsA little betterGoodClose to fullUnchanged
Works without new cabling
CostFreeMidHigherOngoing monthly
Best forSmall homes, router in a bad spotBrick veneer, two storeysDouble brick, split levels, granny flatsSlow but stable connections

A faster plan only helps when the connection is slow but stable. It does nothing for Wi-Fi that drops in the back bedroom.

Testing like a technician

These four checks show what drops, when, and whether it happens before or after the router.

  • Run two pings at once

    On Windows 11, open Terminal, type ipconfig and note the Default Gateway (often 192.168.0.1 or 192.168.1.1). In two windows, run ping -t with that address, and ping -t 1.1.1.1. On a Mac, use ping in Terminal; the router address is under System Settings > Wi-Fi > Details > TCP/IP. Compare when it drops, using the table above.

  • Get Windows to tell you why

    Open Terminal as administrator and run netsh wlan show wlanreport. It writes an HTML report covering roughly the last three days of Wi-Fi sessions, with every disconnect and a reason code. Drops at the same times, or only when the laptop sleeps, are the clue.

  • Check a Mac's signal

    Hold Option and click the Wi-Fi icon in the menu bar for signal strength (RSSI), noise and channel. Open Wireless Diagnostics for a monitored log.

  • Read the router log

    Most routers keep a System Log in their admin page. WAN down or a lost link points at the NBN side. DFS, radar or repeated client disconnects point at the Wi-Fi.

The settings traps: DFS, band steering and WPA3

Three router settings cause dropouts that look like faults but aren’t.

  • DFS channels

    Channels 52 to 144 on 5 GHz are shared with radar. A router that detects a pulse must leave that channel for at least 30 minutes, so your 5 GHz network blinks out and devices drop in a way that looks random.

  • Band steering

    One network name for both bands lets the router push devices between 2.4 and 5 GHz. Good phones and laptops cope; cheap smart plugs, older printers and some doorbells drop off and refuse to rejoin.

  • WPA3 transition mode

    Mixed WPA2/WPA3 security is the right default, but some older gadgets connect, then drop every few hours. A separate WPA2 network just for them keeps your main network on the stronger setting.

What not to do

We check the NBN connection box first. Its lights tell us early whether the line is part of the problem.
We check the NBN connection box first. Its lights tell us early whether the line is part of the problem.

The quick fixes people reach for usually add problems. Skip these.

  • Factory resetting first: it wipes NBN settings and Wi-Fi names, so every device needs setting up
  • A cheap extender: it usually halves the speed and adds a second network name
  • Two routers side by side: overlapping channels interfere with each other
  • Two routers in a row: double NAT problems for gaming and video calls
  • A faster plan: speed and stability are different problems, see fixing slow Wi-Fi
  • Running network cable through walls or ceilings yourself

Restart and check the router instead, and reset only with the provider’s details in hand. In Australia, fixed cabling has to be installed by a registered cabler; a patch lead along the skirting is fine.

When to call us

If the NBN box lights are steady, the router is in the open and up to date, and you still lose Wi-Fi in parts of the house, you need better coverage, not more settings.

  1. Test the line. We test the speed arriving at the NBN box.
  2. Check the router. We read the router’s logs and check its settings.
  3. Map the signal. We map the signal room by room before recommending anything.

An on-site visit is $189 for the first hour, then billed in 30-minute blocks. We’re open 7 days with calls answered until 8 pm.

Common questions

Still stuck? Call 1300 224 027, 9 am to 8 pm, 7 days.

Why does my Wi-Fi drop out more at night?

Evenings are when every device in your house and your street is busy, so 2.4 GHz channels get crowded and weak links fail first. If the router ping stays steady and only the internet drops or slows, it can also be congestion on your provider's network. Run the two ping tests at the time it happens to tell which.

Will a new router fix the dropouts?

Only if the router is the cause: it's old, overheating, crashing or no longer getting firmware updates. If the dropouts happen at the far end of the house, a new router in the same cupboard will behave much the same. Coverage problems need the router moved, mesh nodes or wired access points.

Are Wi-Fi extenders a good fix?

Rarely. Most extenders repeat on the same radio, roughly halving the speed, and many create a second network name that devices cling to after you walk away. A mesh system manages the handover between nodes, which is what stops the drop as you move around the house.

Why do my smart plugs and cameras keep going offline?

Most only use 2.4 GHz, and some lose track when the router combines 2.4 and 5 GHz under one name, or when the network runs WPA3. A separate 2.4 GHz network using WPA2 usually settles them. We set up a separate network for smart devices when we install mesh Wi-Fi.

What is a DFS channel?

Part of the 5 GHz band (channels 52 to 144) is shared with radar, so routers using it must listen for radar first and move away if they detect it. When that happens, the 5 GHz network disappears for a minute or more and devices disconnect or fall back to 2.4 GHz. Fixing 5 GHz on channels 36 to 48 avoids it.

Is it my NBN or my Wi-Fi?

Plug a laptop into the router with a network cable and see whether it drops too. If the wired laptop drops at the same moment and the NBN box lights change, it's the connection, so call your provider. If the wired laptop stays up while Wi-Fi devices drop, the problem is the Wi-Fi.

Does Wi-Fi 7 stop dropouts?

Not on its own. Wi-Fi 7 is faster close to the router and can use more than one band at once, but walls and distance still win. Some older devices also struggle with Wi-Fi 7 features, so if dropouts started with a new router, try turning off Multi-Link Operation (MLO) as a test.

Can you come out and sort it?

Yes. An on-site visit is $189 for the first hour, then billed in 30-minute blocks. We check the NBN connection and router, map the signal room by room, fix the settings, and only recommend mesh if the house actually needs it. Any in-wall cabling is scoped for a registered cabler.

Reviews from TechBox customers

Real Google reviews.

Very quick. Very efficient. Excellent value for money.

Keith J., Google review

Great friendly service, on time to solve the problem

Bruce W., Google review

Duvi came out to fix my computer today and I'm so very happy to say that it is now working again! I'm so grateful as Duvi saved me thousands of dollars because a major electronics chain told me i needed a new computer.

Maree W., Google review

Still not fixed? We’ll take it from here

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online