Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

PS5 keeps turning off? Overheating fixed fast in Canberra

Your PS5 switches off mid-game, the fan roars or it warns you that it's too hot. Bring it to our Mitchell workshop and we'll find out why: usually dust packed into the heat sink, sometimes a worn fan, the thermal interface or the power supply. You get a fixed quote first, and a clean is usually done the same or next day.

“Prompt, professional, and very helpful. Highly recommend.”
CHRISTINE F., Google review
  • Open 7 days, 9 am to 8 pm
  • 90-day warranty
  • Quote before work
  • We find the cause before we quote
  • Original PS5, PS5 Slim and PS5 Pro
  • Liquid metal only touched when it's needed
  • Tested under load before you collect it
  • Open 7 days, calls until 8 pm
A large white console opened on a repair mat with its cooling fan removed and a thick layer of grey dust on the heat sink fins beside a vacuum nozzle
Clean and re-paste
Confirmed before we start
Turnaround
Clean usually same or next day
Where
Mitchell workshop, open 7 days
Warranty
90 days, parts and labour

Rather we call you?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.

We only use your number to call you about this.

for a standard clean, including the stress test
Same/next day
the room temperature range Sony lists for the PS5
5 to 35°C
the gap from the wall Sony asks you to leave
10 cm
warranty on parts and labour
90 days

Signs your PS5 is overheating

  • Turns off in the middle of a game

    The screen goes black and the console powers down, often during demanding games or long sessions. It usually starts happening sooner each time.

  • A warning that the PS5 is too hot

    The console tells you to turn it off and let it cool. Do it, and book it in: the warning means it's running at its limit.

  • Fan sounds like a hair dryer

    A fan that ramps up in the first few minutes of a game is working hard to push air through a clogged heat sink.

  • Weak or very hot air from the back

    If the exhaust feels weak but very hot, air isn't getting through the heat sink properly.

  • Rattling, grinding or clicking fan

    A worn fan bearing or debris in the fan. We clean or replace the fan before it fails completely.

  • Turns off even when it's cool

    If the console isn't hot when it shuts down, the power supply is a more likely cause than heat. We test it under load.

  • Only shuts down in rest mode

    Rest-mode shutdowns can come from software, storage or a connected USB device rather than heat. We check those too.

Pick the job. We confirm a fixed price for your exact model before any work starts.

  • PS5 clean and re-paste

    Fan and heat sink cleaned inside, liquid metal renewed only if needed

    Turnaround
    Usually same or next day
    Price
    Priced for your model
  • PS5 fan replacement

    A worn, rattling or grinding fan swapped for a matched part

    Turnaround
    1 to 3 business days, depending on the part
    Price
    Priced for your model
  • PS4 or Xbox clean and re-paste

    Dust out and dried paste replaced, often a dramatic drop in noise

    Turnaround
    Usually same or next day
    Price
    Priced for your model
  • Power supply or other typical repair

    Internal supply tested under load and replaced if it cuts out

    Turnaround
    1 to 3 business days
    Price
    Around $270
  • Assessment and quote

    Load test, fan check and power test before we quote

    Turnaround
    Usually same or next day
    Price
    Priced for your model

What happens next

  1. Tell us what it's doing

    Call 1300 224 027 or start a repair ticket online. Tell us your PS5 model, when it shuts down, how long into a session and where it sits at home.

  2. We test it under load

    We run a demanding game, listen to the fan, check the airflow and test the power supply, so we know the cause before we quote.

  3. Clean and repair

    A full internal clean of the fan and heat sink, fresh thermal pads where needed, and the liquid metal renewed only if testing shows it's needed.

  4. Stress test, then collect

    We run it for an extended session with a demanding game before we call you. If something isn't right afterwards, we make it right.

Before and after

Drag the handle to compare. The same kind of job, photographed on the bench before and after.

After: clogged fan, cleanedBeforeAfter
Clogged fan, cleaned Dust and pet hair cleared from the fan and heat pipe.
Exploded technical drawing: inside a home console

Inside a home console

Heat, ports and power: the usual suspects.

  • Cooling fanDust and wear cause noise, heat and shutdowns.Drawn in red: the part we replace most
  • Heat sinkCleaned and re-pasted. Some use liquid metal.
  • HDMI portBent pins and lifted ports need micro-soldering.
  • Power supplyDead consoles and clicking starts.
  • Disc driveWon’t read, won’t eject, or grinds.

Why a PS5 shuts itself down

Side panels off and the fan exposed, ready to be removed and cleaned by hand.
Side panels off and the fan exposed, ready to be removed and cleaned by hand.

A PS5 protects itself: when the processor or its power circuitry hits its temperature limit, it switches off rather than risk damage.

That’s why overheating feels so sudden.

A hot laptop slows down gradually. A PS5 doesn’t, because Sony set its clock speeds by workload and power draw rather than temperature, so a struggling console just gets louder until the fan can’t keep up.

Read more

Not every shutdown is heat. A failing power supply, storage errors, a rest-mode software fault or a USB device can look the same from the couch, which is why we test before we quote.

What a proper PS5 clean includes

A vacuum around the vents isn't a clean. This is what happens on our bench, in order.

  • A baseline test first

    We run a demanding game and time how long it takes to shut down, so the fix is measured, not guessed.

  • Fan out, not blasted

    The fan comes out and is cleaned by hand. If we use air at all, the blades are held still so they can't over-spin.

  • Fins cleaned from inside

    The dust mat forms on the inner face of the heat sink, where vacuuming from outside never reaches.

  • Thermal pads checked

    Pads on the memory and power components are inspected and replaced if they've hardened or torn.

  • Liquid metal only if needed

    Renewed only when a clean console still runs hot, with nearby parts masked and the seal restored.

  • Power supply load test

    A console that cuts out while cool gets its supply tested before anyone blames the cooling.

  • Latest system software

    Installed before the final test, so we're judging the hardware, not an old fan profile.

  • Extended stress test

    A long session with a demanding game, checking fan noise and exhaust heat, before we call you.

  • 90-day warranty

    Parts and labour are covered. If something isn't right afterwards, we make it right.

Where the dust actually goes

The felt-like dust mat lifted off the inside of the heat sink fins, where outside vacuuming never reaches.
The felt-like dust mat lifted off the inside of the heat sink fins, where outside vacuuming never reaches.

A PS5 draws air in at the front, through a large finned heat sink and out of the back.

Dust and pet hair mat across the inner face of the fins like felt, so the console looks clean while the fan works harder.

The original PS5’s dust catchers, two holes you can vacuum once the covers are off, only capture part of what comes in:

  • Canberra’s dry, dusty summers
  • Carpet and pets
  • A smoky bushfire season
  • Months in a cupboard, shed or spare room, sometimes with insects inside

Two habits make it worse

  • Compressed air

    It spins the fan far past normal speed, wearing the bearing, and pushes dust deeper into the fins.

  • A boxed-in console

    One in a TV cabinet or under a soundbar breathes its own hot exhaust, so even a clean heat sink runs hot.

Why is my PS5 overheating?

When it shuts down, how it sounds and how hot the exhaust feels usually point to the cause. This is how we read them on the bench.

What you noticeLikely causeThe fix
What you noticeShuts down mid-game, exhaust very hotLikely causeDust matted across the heat sink finsThe fixInternal clean and stress test
What you noticeFan loud within minutes, weak airflowLikely causeClogged heat sink or dust catchersThe fixInternal clean, then vacuum the dust catchers every few months
What you noticeRattle, grind or tick from the fanLikely causeWorn bearing or debris in the bladesThe fixFan cleaned or replaced
What you noticeClean console still hits the heat warningLikely causeLiquid metal shifted or covering the chip unevenlyThe fixLiquid metal renewed and the seal restored
What you noticeTurns off while cool, often as a game loadsLikely causeInternal power supply dropping out under loadThe fixLoad test, then power supply replacement
What you noticeOnly shuts down in a cabinet or in summerLikely causeHot air recirculating, or a room near 35°CThe fixOpen shelf, 10 cm from the wall, out of the sun
What you noticeShuts down in rest mode onlyLikely causeSoftware, storage or a USB deviceThe fixSoftware and storage checks before any hardware work
What you noticeLoud since it came out of storageLikely causeDust, pet hair or insects insideThe fixFull clean before a long session

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Liquid metal: when it matters

Between the processor and heat sink, the PS5 uses liquid metal, a gallium-based alloy that moves heat far better than thermal paste.

We only touch it when a clean console still runs hot on test.

It conducts electricity, so Sony seals it around the chip, and gallium reacts with aluminium, so it can’t be swapped for any compound to hand. Some repairers report original PS5s where it has shifted, often after a knock or teardown, but Sony hasn’t called it widespread, and dust is far more common.

  1. Clean off the old alloy. From both the chip and the heat sink.
  2. Mask the board. The components around the chip are covered, because a single stray drop can short it.
  3. Apply a measured amount. Fresh metal goes on, and the seal is checked or replaced.
  4. Remount evenly. The heat sink goes back with even pressure. Never rushed, and never a home job.

Home clean, workshop clean or liquid metal service?

Three levels of fix, from free to a full thermal service. Most overheating PS5s need the middle one.

Swipe to compare

Clean at homeOur pickWorkshop cleanClean plus liquid metal
Clears the vents and dust catchers
Clears the heat sink fins inside
Fan removed and checked
Thermal pads checked
Fixes uneven liquid metal
Safe to do yourself
Typical time15 minutesSame or next day1 to 3 business days
Relative costFreeMidHigher

We only move to the liquid metal service when a clean console still runs hot on test. Most don't need it.

Power faults that look like overheating

On a PS4 or Xbox, dried thermal paste is cleaned off and replaced with fresh paste.
On a PS4 or Xbox, dried thermal paste is cleaned off and replaced with fresh paste.

The PS5’s power supply is built in, and a failing one tends to cut out under load, just as a demanding game starts.

The giveaway: the console isn’t hot when it shuts down.

  • Clicks off within seconds of a game loading. Points to the power supply rather than the cooling.
  • After a summer storm. A surge through the power point can damage the supply or board, so we test the supply under load and check the cable and outlet.
  • Only in rest mode. More often a software, storage or USB-device problem, ruled out before we open anything.

Consoles we clean and re-paste

The model number is on the label on the back or underside. On a PS5, it's also under Settings > System > System Software > Console Information.

PS5

  • Original PS5, CFI-1000 to CFI-1200 series
  • PS5 Digital Edition
  • PS5 Slim, CFI-2000 series onwards
  • PS5 Pro, CFI-7000 series

PS4

  • PS4, CUH-1000 to CUH-1200 series
  • PS4 Slim, CUH-2000 series
  • PS4 Pro, CUH-7000 series

Xbox

  • Xbox Series X
  • Xbox Series S
  • Xbox One, One S and One X

Nintendo

  • Switch and Switch OLED
  • Nintendo Switch 2: ask us

How long it takes

A standard clean is usually done the same or next day, including an extended stress test. A new fan, fresh liquid metal or a power supply takes 1 to 3 business days for parts and testing.

We’d rather keep it an extra afternoon than hand back a console that cuts out on night one.

How each console handles heat

Where the hot air goes and what sits on the chip decide both the cause and the fix.

Swipe to compare

Original PS5PS5 Slim and ProPS4 familyXbox Series X
Hot air leaves throughThe backThe backThe backThe top vent
On the processorLiquid metalLiquid metalThermal pasteThermal paste
Covers come off for cleaning
Most common causeDust matted on the finsDust and cramped cabinetsDried paste and dustSomething blocking the top vent
Typical bench jobClean; liquid metal only if neededClean; liquid metal only if neededClean and fresh pasteClean; paste if it has dried
Keep clear10 cm from the wall10 cm from the wallThe back and sidesNothing on top

Not sure which PS5 you have? The model number starts CFI-1 on an original, CFI-2 on a Slim and CFI-7 on a Pro.

PS4, Xbox and Switch overheat too

Other consoles overheat too, each with its own twist.

  • PS4 and PS4 Pro

    Known for jet-engine fans after a few years: dust plus dried-out thermal paste. A clean and fresh paste usually makes a dramatic difference.

  • Xbox Series X

    Breathes in underneath and out of the top, so anything sitting on it chokes it. Our Xbox repairs page covers its power and cooling faults.

  • Nintendo Switch

    Runs hardest in the dock. A swollen battery lifting the screen is a separate, more urgent job; see Nintendo Switch repairs.

Try this before you book

These checks are free, don't involve opening anything, and fix more shutdowns than you'd expect. Even when they don't, they tell us where to start.

Stop and call us if: If the fan grinds, you smell hot plastic, a drink has gone into the vents or it shuts down within minutes even in open air, stop using it and bring it in. Don't remove anything beyond the covers.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.

ruth d., Google review

Excellent professional service- very prompt home visit, quick diagnosis of my computer problem and then it was fixed and returned to my house next day. I will certainly use this company again.

ironbark v., Google review

Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.

Steve P., Google review

Questions about PS5 overheating

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
Why does my PS5 keep turning off?

Usually because dust has clogged the heat sink and the processor reaches its temperature limit, so the console shuts down to protect itself. A worn fan, the thermal interface, poor ventilation or a failing power supply can cause the same symptom. We test it to find which.

How often should a PS5 be cleaned?

It depends on the room. Pets, carpet, smoke and dust all speed things up. Vacuum the dust catchers on an original PS5 every few months, and book a full internal clean when the fan gets noticeably louder or the console runs hot.

Do you replace the liquid metal?

Only when testing shows the thermal interface is the problem. Most overheating PS5s need a proper clean, not new liquid metal. When it does need renewing, we clean off the old material, protect the surrounding components, apply fresh liquid metal carefully and restore the seal.

Do the PS5 Slim and PS5 Pro need cleaning too?

Yes. They also use liquid metal and push air through a heat sink that collects dust over time. Their covers come off differently from the original, so follow Sony's instructions for your model, and leave anything beyond the covers to a repairer.

Can I clean my PS5 myself?

You can remove the covers, vacuum the dust catchers and wipe the vents. We don't recommend opening it further at home, because there's mains power inside and liquid metal on the processor. Avoid compressed air in the vents, which can over-spin the fan and push dust deeper.

Does it matter if my PS5 stands upright or lies flat?

Both are fine with the stand fitted correctly. What matters more is space around the console. Keep it out of enclosed cabinets, off the carpet and at least 10 cm from the wall.

How long does a PS5 clean take?

A standard clean is usually done the same or next day, including testing. If the fan needs replacing or the liquid metal needs renewing, allow 1 to 3 business days. We'll tell you when we quote.

Will I lose my games or saves?

No. A clean doesn't touch the console's storage. Your games, saves and settings stay exactly where they are.

My PS5 is still under warranty. Should I bring it to you?

If it's still covered by Sony's warranty, check with Sony first, as it may cost you less. Once it's out of warranty, we'll quote the repair and explain your options.

Get it booked in today

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online