Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

Starlink installation across rural Canberra and nearby NSW

We install Starlink for homes, farms and businesses across rural ACT and the surrounding NSW region, from Hall and Uriarra to Murrumbateman, Bungendore and Michelago. We check the sky from the exact spot the dish will sit, fasten the mount into solid structure, seal every cable entry and get Wi-Fi to the rooms and sheds where you need it. TechBox is an independent installer, not Starlink or SpaceX.

“Great friendly service, on time to solve the problem”
Bruce W., Google review
  • Open 7 days, 9 am to 8 pm
  • Quote before work
  • Obstruction check from the exact mounting spot
  • Roof, ridge, wall, pole and ground mounts
  • Sealed cable entries and tidy, clipped cable runs
  • Wi-Fi to far rooms, sheds and granny flats
  • Independent installer, open 7 days
A Starlink dish on a pitched-roof mount on a dark corrugated metal roof, its cable clipped down to the gutter, with a ladder against the eave and hills behind
Starlink install
Confirmed before we start
Turnaround
Visits 7 days, including weekends
Where
Rural ACT and the surrounding NSW region

Rather we call you?

Leave your number. We call back 9 am to 8 pm, 7 days, to talk through your roof and the cable run.

We only use your number to call you about this.

field of view the dish needs kept clear of trees and rooflines
110°
of cable in the Standard box, the first limit on where it goes
15 m
average Standard kit draw on Starlink's spec sheet
75-100 W
visits, including weekends, with calls until 8 pm
7 days

Starlink jobs we take on

  • A new kit and no obvious spot for it

    Trees on every side and a roof you'd rather not climb. We survey the roof, walls and yard with the Starlink app and choose the spot with the clearest sky.

  • A dish still sitting on the ground

    The temporary setup that became permanent. We mount it properly, up and away from dogs, stock, mowers and long grass.

  • Dropouts and obstruction warnings

    Short drops on video calls usually mean something is in the dish's view. We read the app's obstruction map, then raise or move the dish.

  • A cable that doesn't reach the right room

    We route the cable through eaves, walls and conduit so the router sits where the Wi-Fi is needed, not wherever the cable happened to end.

  • Weak Wi-Fi at the far end of the house

    Brick walls, foil insulation and long homesteads stop one router covering everything. We add mesh nodes or wired access points.

  • Sheds, studios and granny flats

    Internet in the workshop, the cottage or the stables, using mesh, buried cable or a point-to-point wireless link.

  • Trees growing into the view

    A dish that worked well three years ago may now be looking through branches. We find a higher or clearer spot before anyone reaches for a chainsaw.

  • Moving over from NBN satellite or fixed wireless

    Setting Starlink up beside or instead of your current service, and moving your computers, printers and cameras across to the new network.

  • Power and backup

    Planning a UPS, solar and batteries or a generator so the connection keeps running through short blackouts.

Pick the job. We confirm a fixed price for your exact model before any work starts.

  • Starlink install, roof or wall mount

    Mount into framing, sealed entry, router placed and kit activated

    Turnaround
    Usually one visit
    Price
    Priced for your model
  • Pole or mast mount

    Wall-bracketed or concreted pole to lift the dish clear of trees

    Turnaround
    Quoted once we've seen the site
    Price
    Priced for your model
  • Site survey before you buy or drill

    Sky checks from every likely spot and a written mount plan

    Turnaround
    One visit, at the on-site rate
    Price
    $189 first hour
  • Mesh Wi-Fi for far rooms and outbuildings

    Starlink mesh, your own system or wired access points

    Turnaround
    Often done in the same visit
    Price
    Priced for your model
  • Starlink as backup to the NBN

    Automatic failover router set up and tested with both links

    Turnaround
    Usually one visit
    Price
    Priced for your model
  • Moving a dish or tidying a DIY install

    Clearer sky, a solid mount or a reinstall at a new address

    Turnaround
    Usually one visit
    Price
    $189 first hour

What happens next

  1. Tell us about the property

    Call 1300 224 027 or use the form. Tell us which kit you have and where the power points and main rooms are, and send photos of the roof and the trees around the house.

  2. Survey the sky

    We run the Starlink app's obstruction check from the actual mounting spot, often on the roof, then agree the dish position, cable route and router location with you.

  3. Mount, route and seal

    The mount is fastened into rafters, purlins, studs or a concreted pole. The cable runs in clips and conduit with drip loops, and every penetration is sealed.

  4. Activate, test and hand over

    We activate the kit on your phone with you, test in the rooms that matter and add mesh where needed. Then we show you the obstruction map and outage history in the app.

Exploded technical drawing: a starlink install, part by part

What goes up on the roof, and why each bit matters.

  • The dishNeeds a clear view of the sky in every season.Drawn in red: where we focus first
  • Mount and mastRidge, pivot, wall or pole, chosen for the view and the wind.
  • Cable runClipped, protected and given a drip loop.
  • Weatherproof entrySealed where the cable goes into the house.
  • RouterPlaced where the Wi-Fi can reach, or wired to mesh.

What a proper Starlink install includes

Anyone can plug a dish in. These are the parts that decide whether it still works well after three summers and a few westerlies.

  • Sky checked from the mount spot

    The obstruction check runs from where the dish will actually sit, not from the lawn, and allows for trees in summer leaf.

  • Fixed into framing

    Rafters, purlins, studs or a concrete footing. Never roof sheeting alone, fascia boards or a gutter bracket.

  • Sealed entries, drip loops

    Every penetration gets a grommet or wall plate and sealant, with a loop below so water drips off outside.

  • Cable protected end to end

    UV-stable conduit or neat clips, clear of mains and flues, never crushed in a window frame or cut and re-joined.

  • Router where Wi-Fi is needed

    Indoors, ventilated and central, with mesh or Ethernet to the rooms and sheds the router can't reach.

  • Power and surges planned

    A UPS sized for the kit and surge protection, with solar and battery draw worked out from Starlink's figures.

  • Snow melt settings explained

    We show you how the dish heating works in the app and what it means for a solar and battery setup.

  • Your account stays yours

    You buy the kit and plan in your name. We activate it on your phone with you and never need your password.

  • Handover in the app

    We walk you through the obstruction map, outage history and speed tests, so you can spot problems early.

Why your Starlink isn't performing

The app's outage history and the timing of the drops usually point straight at the cause.

What you noticeLikely causeThe fix
What you noticeCalls freeze for a few seconds at a timeLikely causeTrees or a roofline inside the dish's viewThe fixRaise or move the dish, guided by the obstruction map
What you noticeDrops when the wind picks upLikely causeMount flexing, or fixed to fascia or a gutterThe fixRe-fix into the framing, or brace the pole
What you noticeWorse every summerLikely causeDeciduous trees in full leafThe fixA higher mount, or a pole clear of the canopy
What you noticeFast beside the router, slow elsewhereLikely causeWi-Fi range, not StarlinkThe fixMesh, Ethernet or a wired access point
What you noticeWater marks near the cable entryLikely causeNo drip loop, or an unsealed penetrationThe fixRe-route with a drip loop and a sealed entry
What you noticeDead after a stormLikely causeSurge through the power or the cableThe fixTest and replace parts, then add surge protection
What you noticeDisconnects, with a chewed or kinked cableLikely causeLoose run, or pinched in a window frameThe fixNew Starlink cable in conduit and clips

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Clear sky is the part you can't fix later

Current dishes look across a field of about 110 degrees, handing between satellites all day. A branch, chimney, tank stand or hillside in that view freezes calls and drops games.

The app’s obstruction check only covers where you stand, and the lawn looks nothing like the ridge, so we check each spot at the dish’s height.

  • Gums

    Keep their leaves, grow fast and drop limbs. One at the edge of the view today may be well inside it in three years.

  • Pine windbreaks

    Block signal almost completely, all year round, whatever the season of the survey.

  • Deciduous trees

    The trap. Oaks, elms, poplars and willows look clear in a July survey and are a wall of leaves by December.

Starlink sells two kits that suit most people. They're built for different jobs.

Swipe to compare

Our pickStandardMini
Best forPermanent homes, farms and businessesTravel, utes, backup and low-power sites
Router sits inside the houseNo, Wi-Fi is built into the dish
Average power draw75-100 W25-40 W
Runs straight from 12 V DC
Strong indoor Wi-FiPartial, the Wi-Fi comes from outside
Consistent speeds under loadPartial
Usual mountsRoof, ridge, wall or polePole, vehicle or portable stand

For a permanent home the Standard is almost always the right buy. The Mini earns its place as a travel kit or a low-power backup.

Mounts, cable and weatherproofing

A mesh node in the shed office carries the connection out from the house to the workshop.
A mesh node in the shed office carries the connection out from the house to the workshop.

Starlink rates current dishes for winds of 96 km/h and more. In a Canberra spring westerly the weak point is rarely the dish but the mount and what it’s fixed to.

  • Metal roofs. Through the crest of the sheet, never the valley, into the purlin or rafter with sealing-washer screws.
  • Tiles. Lifting tiles to reach timber means a wall bracket or pole is often cleaner.
  • Ridge or gable end. Ridge mounts sit highest; gable brackets avoid roof holes, with masonry anchors in brick or stud fixings on weatherboard.
  • Never on roof sheeting alone, fascia boards or a gutter bracket.

Its plug is far bigger than a network plug, so each entry gets a sized, sealed grommet or wall plate and a drip loop, never a window frame.

Out of town these are the usual choices. Many properties keep two, so one can cover for the other.

Swipe to compare

StarlinkNBN fixed wirelessNBN Sky Muster
Video calls feel like a fixed lineYes, with a strong signalNo, noticeable delay
Works without a nearby NBN tower
Copes with trees around the houseNo, needs wide clear skyPartial, needs a line to the towerPartial, needs one clear direction
No hardware to buy
Evening slowdownsCan vary with local demandCommon at busy towersCan vary with demand
Who installs itYou or an independent installerNBN's installerNBN's installer
Keeps running in a blackoutOnly with backup powerOnly with backup powerOnly with backup power

NBN standard installations usually have no hardware charge. Starlink hardware is usually bought upfront, though offers change. NBN's satellite options are changing too, so check NBN's address checker. Speeds on all three vary with location, plan and time of day.

Power, the router and the Wi-Fi

On the Standard kit the dish is powered down its cable from the router and power supply inside. Their spot is the key decision: indoors, dry, ventilated, near power and central.

It averages 75 to 100 watts on Starlink’s specifications, more while melting frost and snow, so size solar and batteries on those figures. Add a UPS for short blackouts and surge protection for storms.

A router in the far corner of the garage gives great Wi-Fi in the garage. Long, brick or multi-wing homes usually need Starlink mesh, or bypass mode with your own mesh or access points.

How a Starlink install connects your home
One cable carries power and data between the dish and the power supply and router inside, and mesh nodes spread the Wi-Fi through the house and out to the shed.

Weather, bushfire season and where we work

The dish warms itself to clear frost and snow, which falls some winters around Captains Flat and the ranges. Heavy rain and hail can slow it.

Lightning is the bigger worry on exposed poles, so we cover earthing (by a licensed electrician) and surge protection. Starlink needs power and isn’t a warning system: follow the ACT Emergency Services Agency or NSW Rural Fire Service and keep a battery radio.

We install across rural ACT, including Hall, Uriarra and Tharwa, and NSW from Murrumbateman and Yass to Bungendore, Wamboin, Burra and Michelago. Wamboin and Bywong blocks are often treed; Burra and Michelago can sit under a hillside. See our coverage in rural ACT, the Yass Valley, the Bungendore region and the Queanbeyan region.

Packages

Starting points we tailor to your property. Every package is quoted after a quick look.

Roof or wall install

Homes with a roof face or gable that sees clear sky

  • Obstruction check from the mounting spot
  • Pivot, ridge or wall mount fixed into the framing
  • Sealed cable entry with a drip loop
  • Router placed centrally and kit activated with you
  • Wi-Fi tested in the rooms you use most
Get this quoted

Pole install

Homes ringed by trees, or roofs that shouldn't carry a dish

  • Sky check at the height the dish will sit
  • Wall-bracketed or concreted galvanised pole
  • Buried conduit with the route marked
  • Guard against stock, dogs and mowers
Get this quoted

Whole-property setup

Long homesteads with sheds, an office or a cottage

  • Dish, mount and cabling planned together
  • Mesh, cable or a point-to-point link to outbuildings
  • UPS sized for the kit
  • Separate network for guests or workers
  • Handover with the obstruction map and outage history
Get this quoted

Before you book

A few checks from the ground help us quote accurately and bring the right mount.

Stop and call us if: Don't climb onto the roof, work near overhead power lines or drill through roofing to test a spot. If the next step needs a ladder, book a survey instead.

Try fixing it yourself first

Step-by-step guides for the common causes. If they don’t work, we’re here.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Very personable and professional attention to the problem. Would use again.

Paula K., Google review

The service I have received from TechBox has been nothing but amazing!! I haven’t seen such service for years.I had a problem and asked for their help , from the beginning to the end they were tenacious working through the issues I had with my software. Thank you so much for your help TechBox. You people are most professional I will have no problem…

Steve W., Google review

Very quick. Very efficient. Excellent value for money.

Keith J., Google review

Questions about Starlink installation

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
Are you part of Starlink?

No. TechBox is an independent Canberra company, and we're not Starlink or SpaceX or affiliated with them. You buy the kit and your plan in your own name, and we install it.

Do I need to buy the kit before you come?

Yes, in most cases. Buy the kit and set up your Starlink account first, so we can activate and test everything on the day. If you're not sure whether the Standard or Mini kit suits your property, call us before you buy.

Which kit suits a house, Standard or Mini?

For a permanent home or farm, the Standard kit is usually the right choice. Its larger dish generally gives more consistent performance, and its separate router can sit inside the house, which makes Wi-Fi far easier to spread. The Mini suits travel, low-power setups and backup.

Can you promise a certain speed?

No, and nobody can honestly do that for Starlink. Speeds vary with demand in your area, the time of day, your plan and how clear the dish's view is. What we can do is give the dish the clearest sky available at your property and make sure the Wi-Fi carries the connection to the rooms you use.

Will you drill holes in my roof?

Sometimes. On a metal roof, the mount is screwed through the crest of the sheet into the purlin below, using roofing screws with sealing washers. On a tiled roof, a wall bracket or pole often avoids lifting tiles at all, and we explain where every hole will go and how it's sealed before we start.

How far can the dish be from the router?

As far as the Starlink cable reaches, and Starlink sells a longer cable for the Standard kit. We don't cut and re-join Starlink cables, because it adds a weak point and may affect your warranty with Starlink. For longer distances, the router moves closer to the dish and network cable, fibre or a wireless link carries the connection the rest of the way.

What happens in frost and snow?

The dish can warm its own surface to clear frost, ice and snow, and you control how it does that in the app. On a frosty Canberra morning that's usually all it needs. Heating uses extra power, which matters if you're running on solar and batteries.

Do you cover villages and farms outside Canberra?

Yes. We cover rural ACT, including Hall, Tharwa and Uriarra, and the NSW region around Canberra, including Murrumbateman, Yass, Gundaroo, Sutton, Bungendore, Wamboin, Bywong, Burra, Royalla, Michelago and Captains Flat. If you're further out, call us and we'll tell you whether we can get to you.

Can I keep using my own Wi-Fi system?

Usually, yes. The Starlink router can be put into bypass mode, which turns off its Wi-Fi so your own router or mesh system runs the network. Depending on which Starlink router you have, your router plugs straight into it or needs an adapter.

Will Starlink work in a blackout?

Only if it has power. The router and dish run from mains power, so a blackout takes them down unless you have backup. A UPS sized for the kit carries you through short outages, and solar with batteries or a generator covers longer ones.

Get a mount plan and a fixed quote

Tell us about the property. We plan the mount, the cable run and the Wi-Fi so it works in every room and every season.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Very quick. Very efficient. Excellent value for money.”
Keith J., Google review

Get a Starlink install quote

Tell us about the property. We’ll check the site and quote the mount and cable run.

Starlink quoteTB-·····

Property type
Do you have a kit?

What happens next

  1. We call you back, 9 am to 8 pm, 7 days.
  2. We talk through the roof, trees and cable run, then confirm the mount and a price.
  3. We book the visit. Nothing is ordered until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online