CCTV remote viewing in Canberra, set up safely on every phone
Your cameras on every phone that needs them, each person with their own login, and alerts for people and cars instead of every moth at the porch light. We set up remote viewing through the recorder maker's secure service or a VPN, never by opening ports on your router, and show everyone how to find and save a clip.
“Great friendly service, on time to solve the problem”
- Open 7 days, 9 am to 8 pm
- Quote before work
- No port forwarding, UPnP switched off
- A separate login for each person
- Alerts for people and cars, not shadows
- Works on mobile data, Starlink and 4G
- Open 7 days, calls until 8 pm

- On-site visit
- $189 first hour
- Turnaround
- Usually done in one visit
- Where
- Homes across Canberra
Rather we call you?
Leave your number. We call back 9 am to 8 pm, 7 days, to talk through what you want covered.
- on your router: viewing runs without port forwarding
- 0 open ports
- per person, with access matched to what they need
- 1 login each
- on-site rate, then billed in 30-minute blocks
- $189 first hour
- open, with calls answered until 8 pm
- 7 days
What people ask us to sort out
Cameras only work on home Wi-Fi
The app connects by a local address and the recorder was never linked to the maker's service, so it goes blank on mobile data.
Everyone shares one password
The admin login is on every phone in the family, plus an ex-flatmate's. Nobody can be removed without resetting everyone.
Too many alerts
Swaying trees, headlights, rain and spiders. After a week of it, everyone turns notifications off and misses the one that matters.
No alerts at all
Notifications blocked on the phone, an empty alarm schedule on the recorder, or a battery saver quietly killing the app.
Live view slow or buffering
Phones pulling the full-quality stream over a slow upload, or a recorder on a weak Wi-Fi link to the router.
Port forwarding set up years ago
The recorder's login page has been open to the internet since it was installed. We close it and set up a safer link.
Two brands, two apps
Cameras from a DIY kit plus a doorbell from another brand. We bring them into one app where the hardware allows it.
Remote viewing on Starlink or 4G
These connections share public addresses between customers, so port forwarding can't work. A relay or outbound VPN does.
Cameras on the TV or a tablet
Grandparents who'd rather check the front door on an iPad, or a lounge TV that shows the driveway. It depends on the brand.
Jobs and prices
Pick the job. We confirm a fixed price for your exact model before any work starts.
What happens next
Tell us what you have
Call 1300 224 027 or send a request with the camera brand, a photo of the recorder's label and who needs access.
We check the system
Firmware, the recorder's network connection, your router's port forwards and UPnP settings, and your upload speed.
We set up access and alerts
A secure remote link, a login for each person, two-step sign-in, detection zones and alert schedules.
We test from outside
Each phone is tested on mobile data with Wi-Fi off, we trigger a test alert, and you save a clip yourself before we leave.

Inside a security camera
What separates a good camera from a cheap one.
- Lens and sensorResolution and low-light performance live here.Drawn in red: where we focus first
- Infrared ringNight vision, and why spider webs matter.
- HousingWeather-rated for Canberra frosts and summer sun.
- Network cablePower and video on one wire with PoE.
How remote viewing actually works
Your recorder sits at home behind your modem, and your phone is at work in Civic, at the coast or on hotel Wi-Fi.
For cameras recording to a box at home, there are three ways to connect them.
The maker's relay
Often called P2P or cloud connection. The recorder keeps an outgoing link to the maker’s server and your app reaches it through that. Nothing opens on your router; you scan the recorder’s QR code.
A VPN
Your phone joins your home network over an encrypted tunnel, as if you were on the couch. It doesn’t depend on the camera maker, but needs a router or small device that runs a VPN.
Port forwarding
The router passes incoming internet connections straight to the recorder. It was standard a decade ago, and it’s the one we remove.
What a proper remote viewing setup includes
Getting a picture on a phone takes five minutes. Getting it safe, quick and useful for the whole family takes a bit more care.
No holes in your router
The recorder connects out to the maker's encrypted relay or you connect in by VPN. Old port forwards are closed.
A login for each person
Owner, family and house-sitter each get their own access, so one person can be removed without resetting everyone.
Two-step sign-in
Two-factor authentication on the camera account, so a leaked password alone doesn't open your cameras to a stranger.
Alerts worth reading
Person and vehicle detection, with zones drawn around the driveway and gates rather than the footpath or the gum tree.
Schedules that fit
Alerts on when you're out or asleep and quiet when the family's home, using schedules or location where the app supports it.
Smooth on mobile data
Phones use the lighter substream for live view, with full quality one tap away for zooming and playback.
Clips you can share
We show you how to save a clip to your phone and send it to police or your insurer with the right time stamp.
Firmware kept current
Recorder and cameras updated, with automatic updates switched on where the maker offers them.
Why we don't open ports

A recorder with a forwarded port shows its login page to the whole internet. Automated scanners find it within hours, and device search sites list it by brand and firmware version.
UPnP is the quiet version: many recorders and routers ship with it on, letting the recorder open its own ports unnoticed.
- Router port forwarding and UPnP tables checked
- Anything pointing at a camera or recorder closed
- UPnP switched off on the recorder
From March 2026, new connected devices supplied in Australia need no universal default passwords, a way to report flaws and a stated support period. That doesn’t reach a 2017 recorder, so if yours gets no firmware updates, a recorder replacement is often safer, and your cameras can usually stay.
Why can't I see my cameras away from home?
Remote viewing faults come down to the recorder's link, the network or the phone. Here's how we tell them apart.
Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.
Setting up the household
The usual setup is one admin password on every family phone, plus an ex-flatmate and a house-sitter from two summers ago. Nobody can be removed without changing everyone’s password, so nobody is.
| Person | Their own login gets |
|---|---|
| Owner | Full control of settings, users and storage, with two-step sign-in |
| Partner or adult children | Live view, playback and saving clips |
| Teenagers | Live view of the driveway and front door, alerts off |
| House-sitter or carer | Live view of the entries, removed when they’re done |
| Older parents | Doorbell and front camera on an iPad, large tiles, no settings |
Some apps invite another person’s account; others use user accounts on the recorder. We set it up your system’s way and leave a note of who has what, and video doorbell installation explains which doorbell brands share an app.
Four ways to view your cameras remotely
They all put the picture on your phone. They differ in what they expose, what they cost and what they depend on.
Swipe to compare
| Our pickMaker's relay (P2P) | VPN to home | Port forwarding | Cloud cameras | |
|---|---|---|---|---|
| Nothing open to the internet | Partial | |||
| Works on Starlink and CGNAT plans | Partial | |||
| Recordings kept at home | ||||
| Keeps working if the maker's service changes | ||||
| Easy for the whole family | Partial | |||
| Ongoing fee | Usually none | None | None | Usually a monthly plan |
| Setup | QR code plus two-step sign-in | Router or VPN device needed | Router rules and fixed address | Account and plan |
| Our view | Default for most homes | For the privacy-minded | We close these | Fine for a camera or two |
For most homes we use the maker's relay with two-step sign-in. A VPN suits people who want nothing depending on the camera maker, and it needs a router or small device that can run one.
Alerts worth getting

Basic motion detection fires on gum trees in the spring westerlies, headlights across a cul-de-sac, rain and moths at the infrared light.
After a week, everyone mutes the app.
- People and vehicles only. Most cameras sold in the last few years can tell them from everything else, so we start there.
- Zones off the footpath. And off the nature strip.
- A few seconds of pre-record. Where the recorder allows it, so the clip shows the person walking up the drive, not just the moment of the alert.
- iPhone Focus modes checked. They silence camera alerts unless the app is allowed through or its alerts are marked Time Sensitive.
- Android battery optimisation exempted. Otherwise it can delay or block the app’s notifications. We trigger a test alert before we leave.
Basic motion or smart detection?
What your cameras can detect decides whether alerts are useful or ignored. Most cameras from the last few years have at least person detection.
Swipe to compare
| Basic motion | Person and vehicle detection | Our pickSmart detection plus line crossing | |
|---|---|---|---|
| Ignores swaying trees and shadows | |||
| Ignores insects and rain at night | Partial | Partial | |
| Catches someone walking in | |||
| Ignores people walking past on the footpath | Partial | ||
| Works on older cameras | Partial | Partial | |
| Alerts in a typical day | Many, mostly false | Far fewer | Fewest, mostly real |
Where cameras are too old for smart detection, a newer recorder can sometimes add it. We check your models before suggesting new cameras.
Smooth video on a phone, a tablet or the TV
Each camera sends a full-quality main stream for recording and a lighter substream for small screens.
Use the substream
Phones should use it for live view and multi-camera grids, switching to full quality to zoom or play back. Otherwise every camera competes for an upload that’s a fraction of your NBN download.
Cable the recorder
If it stalls even at home, a recorder on a weak Wi-Fi bridge or powerline adaptor struggles with several streams. A network cable to the router fixes it.
Router setup or mesh Wi-Fi sorts out the rest of the house.
HomeKit Secure Video for Apple households

If your household is all Apple, HomeKit Secure Video is worth knowing about. It needs compatible cameras, an Apple TV or HomePod as a home hub, and an iCloud+ plan.
| iCloud+ plan | Cameras covered |
|---|---|
| 50 GB | One |
| 200 GB | Up to five |
| 2 TB or more | No limit |
It keeps ten days of event clips, which don’t count against your iCloud storage. Planning a new system around remote viewing from day one? See home CCTV installation.
Before you book
Five minutes of checking tells us what we're working with, and sometimes fixes it.
What Canberra customers say
Real Google reviews. We ask every customer, every time.
Very personable and professional attention to the problem. Would use again.
The service I have received from TechBox has been nothing but amazing!! I haven’t seen such service for years.I had a problem and asked for their help , from the beginning to the end they were tenacious working through the issues I had with my software. Thank you so much for your help TechBox. You people are most professional I will have no problem…
Very quick. Very efficient. Excellent value for money.
Questions about remote viewing setup
Straight answers. More in our questions and answers.
Is port forwarding really that risky?
For most home recorders, yes. A forwarded port makes your security depend on the recorder's own login page and firmware, which many makers stopped updating years ago. The 2016 Mirai botnet spread largely through cameras and recorders reachable this way on default passwords. The maker's relay or a VPN gives you the same picture on your phone while your router accepts no incoming connections.
Do I need a subscription to view my cameras remotely?
Usually not, if your cameras record to a recorder at home. Remote viewing through the maker's app is normally free. Subscriptions are mostly for cloud storage of clips, and some brands also put extras such as smart alerts behind a plan, which we'll point out before you choose.
Will remote viewing work on Starlink or 4G home internet?
Yes, through the maker's relay or a VPN that connects outwards. Starlink's standard plans and most 4G and 5G home services use CGNAT, which stops port forwarding working at all, so relay-based viewing is the reliable option on those connections.
How much mobile data does live viewing use?
On the lighter substream, roughly 100 to 300 MB an hour per camera is typical, depending on the camera's settings. A 4K main stream can use several gigabytes an hour. We set phones to use the substream by default and switch up only when you zoom or play back.
Can I see my cameras on the TV or an iPad?
Often. Most camera apps run on iPads and Android tablets, some run on Apple TV, Android TV or Fire TV, and some cameras show on Google Nest Hub or Echo Show displays. HomeKit Secure Video cameras appear in the Apple Home app. It depends on the brand, so we check before you buy.
What happens when a house-sitter or flatmate leaves?
Remove their login from the app or recorder and their access ends straight away. That's why we give everyone their own login. If people have been sharing the admin password, we change it and set up individual accounts.
Can I get alerts only when nobody's home?
Most apps let you schedule alerts or arm and disarm them, and some switch on automatically using your phone's location when the last person leaves. We set up whichever your system supports and test it with you.
Will I still see my cameras if the internet goes down?
The recorder keeps recording, but remote viewing stops until the connection is back, and you can review the footage then. For homes that need it, a 4G or Starlink backup connection can take over automatically when the NBN drops.
Can you set this up on cameras someone else installed?
Yes, in most cases. We need the admin password or a way to reset it, and the recorder needs to be recent enough to work with the maker's current app. If it isn't, we'll explain what a replacement recorder involves.
More home CCTV
- Video doorbellsSee and answer the front door from your phone, with power, chime and alerts set up properly.
- Business CCTVCameras that identify faces at doors and tills, on their own network, with retention and logins agreed upfront.
- CCTV repair and upgradesOffline cameras, dead recorders and grainy analogue systems fixed or upgraded, reusing cable that tests sound.
Remote viewing setup across Canberra and the region
Workshop in Mitchell, visits 7 days. Find your district.
- Belconnen27 areas
- Gungahlin17 areas
- Inner North Canberra13 areas
- Inner South Canberra11 areas
- Woden Valley13 areas
- Weston Creek8 areas
- Molonglo Valley5 areas
- Tuggeranong18 areas
- Fyshwick, Hume and east Canberra7 areas
- Rural ACT3 areas
- Queanbeyan and surrounds11 areas
- Yass Valley and Murrumbateman6 areas
- Bungendore, Wamboin and Braidwood6 areas
Tell us the rooms, we’ll quote the gear and install
We recommend the gear, install it neatly and show everyone at home how to use it.
1300 224 027Calls answered 9 am to 8 pm, 7 days.
- Quote before any work starts
- Workshop in Mitchell, visits across Canberra
- If something isn’t right, we come back and make it right.
“Prompt, professional, and very helpful. Highly recommend.”



