Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

How to fix

How to fix a CCTV camera that's gone offline

Find out whether it's the camera, its cable and power, the Wi-Fi, the recorder or just the phone app, then fix the common faults without climbing a ladder.

  • Moderate
  • 20 to 60 minutes
  • 4 min read

Rather we fix it? Most faults found in one visit at our Mitchell workshop, with a fixed quote first.

Open 7 days, 9 am to 8 pm
“Great friendly service, on time to solve the problem”
Bruce W., Google review
A security camera on a house wall with a cobweb across its lens and its network cable chewed and frayed near the bracket

Key takeaways

  • First work out where it's offline: on the recorder's own screen, or only in the phone app. They have different causes.
  • Several cameras failing together points to something they share: a power supply, a PoE switch, the recorder or the modem.
  • A wired camera that drops only at night is often short of power once its infrared lights switch on.
  • After a new modem or Wi-Fi password, Wi-Fi cameras won't rejoin by themselves and recorders can end up on the wrong address range.
What you’ll need: Phone with the camera app, The recorder's admin password, A monitor and mouse for the recorder, A spare network cable, A torch.

Rather we just fix it?

Offline cameras, dead recorders and grainy analogue systems fixed or upgraded, reusing cable that tests sound.

CCTV repair and upgrades1300 224 027

Try these fixes, in order

Start at the top. Most problems are solved in the first few steps. Tick them off as you go.

Stop and call us if: none of these work, the fault is probably hardware. Our cctv repair and upgrades service picks up where this guide stops.

Why is my security camera offline?

How the fault shows up usually narrows it down to one part of the system.

What you noticeLikely causeThe fix
What you noticeOne wired camera offline, the rest fineLikely causeIts cable, plug, port or the camera itselfThe fixSwap ports, then test the cable and camera
What you noticeSeveral wired cameras offline togetherLikely causeA shared PoE switch, power supply or the recorderThe fixCheck lights on the switch and recorder; restart each
What you noticeWired camera drops only at nightLikely causeNot enough power once infrared turns onThe fixCheck the PoE budget, cable length and cable quality
What you noticeWi-Fi cameras offline after a new modemLikely causeOld Wi-Fi name or password still storedThe fixRe-add each camera to the new network
What you noticeRecorder fine, app says device offlineLikely causeHome internet down or app sign-in lapsedThe fixCheck the internet; log out and in; update the app
What you noticeBattery camera dead on frosty morningsLikely causeBattery too cold to charge, or solar panel shadedThe fixCharge indoors; move or clean the panel
What you noticeChannel shows a password or login errorLikely causeCamera reset itself or its password changedThe fixRe-add the camera with its current password
What you noticeLive view works, no recordingsLikely causeHard drive failed, missing or unformattedThe fixCheck storage status; replace the drive
What you noticeOlder analogue camera shows video lossLikely causeFailed 12-volt supply or corroded BNC plugThe fixReplace the supply or plugs, or upgrade

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Tried these and still stuck?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, and tells you whether it’s worth bringing in before you travel.

We only use your number to call you about this.

longest network cable run from switch to PoE camera
100 m
per port on standard 802.3af PoE, before cable losses
15.4 W
the Wi-Fi band most home cameras need to join
2.4 GHz
below this, most lithium camera batteries won't charge
0°C
Exploded technical drawing: inside a security camera

Inside a security camera

What separates a good camera from a cheap one.

  • Lens and sensorResolution and low-light performance live here.Drawn in red: where we focus first
  • Infrared ringNight vision, and why spider webs matter.
  • HousingWeather-rated for Canberra frosts and summer sun.
  • Network cablePower and video on one wire with PoE.

Where "offline" actually happens

A camera system is a chain: camera, cable or Wi-Fi, PoE switch or recorder, modem, internet, the maker’s cloud and the app.

“Offline” in the app can mean a break at any link.

The recorder’s own screen is the most honest view, so plug a monitor and mouse into it and look at the live grid.

  • Live on the recorder, offline in the app

    The camera is fine. The break is somewhere between the recorder and your phone.

  • Dark on the recorder too

    It’s a camera, cable or power problem at the camera’s end of the chain.

  • Several analogue cameras at once

    Older coax cameras often share one 12-volt supply through a splitter. When it fails they all show video loss together, which looks like a recorder fault and isn’t.

Why each camera type goes offline

Wired, Wi-Fi and battery cameras fail in different ways, so the fix starts with knowing which you have.

Swipe to compare

Our pickWired PoEWi-FiBattery or solar
Keeps recording if the Wi-Fi drops
Records around the clockPartialNo, motion clips only
Unaffected by frosty nightsPartial
Unaffected by a new modemRecording carries on
Often fixable from the groundPartialPartial
Usual culprit when offlineCable, port or power budgetWeak signal or changed Wi-Fi detailsFlat battery, cold or a shaded panel

For the views that matter most, a wired PoE camera is the most reliable choice. Wi-Fi and battery cameras suit spots a cable can't reach.

Power faults that look like camera faults

Checking channel status and the PoE port lights on a garage recorder before touching any camera.
Checking channel status and the PoE port lights on a garage recorder before touching any camera.

Power is behind more offline cameras than people expect, because a camera can be short of power and still mostly work.

  • The PoE budget. Recorder PoE ports share one power limit. Draw jumps at dusk when infrared switches on, so an over-budget camera vanishes every evening and returns at dawn.
  • Long or poor cable. The 100-metre PoE limit assumes solid copper. Cheap copper-clad aluminium loses far more, starving a far-fence camera well under the limit.
  • Failing supplies. Analogue plug packs and passive PoE injectors age, especially in hot garages, and fail gradually before they fail completely.
  • Storm surges. Summer storms around Canberra regularly kill PoE ports on recorders and switches. Moving the cable to another port is the quickest test.

Fix it, upgrade it or replace it?

When an older system keeps dropping out, there are three honest options.

Swipe to compare

Fix the faultNew recorder, same camerasReplace the system
Keeps your existing cablingPartial
Lowest upfront costPartial
Supported app and updatesPartial
Better night footage
Fewer old parts left to failPartial
Best whenThe system is only a few years oldCameras are sound, recorder is failingAnalogue or end-of-life gear

Old coax can often be reused with HD-over-coax cameras or Ethernet-over-coax adapters, which saves pulling new cable through the roof.

Cables, roofs and Canberra weather

Outdoor joins are the weak point of most systems, and heat, sun and wildlife do the rest. Finding these faults usually means a ladder and the roof space, which is where we’d ask you to stop.

  • Unsealed joins

    A network plug crimped at the eave in an unsealed junction box takes in water, corrodes and fails months later, often after the first big storm or a week of frosts. Coax plugs on old analogue cameras go green the same way.

  • Sun and wildlife

    Cable on a west-facing wall goes brittle in summer sun. Cockatoos chew exposed runs, and rats and possums chew cable in the roof space.

  • Frost

    Frosty nights cause condensation inside cheap housings, which fogs the picture before it kills the camera.

Modems, Wi-Fi and the app

Cameras back under the eaves, re-cabled and re-aimed once the fault was traced and fixed.
Cameras back under the eaves, re-cabled and re-aimed once the fault was traced and fixed.

A new modem is the single most common reason a whole system goes quiet. Wi-Fi cameras keep looking for the old network, and recorders with a fixed address in the old range record happily where nobody can reach them.

Other network changes that do the same

  • Mesh systems combining 2.4 GHz and 5 GHz under one name, which confuse some older cameras
  • Networks set to WPA3 only, which lock out WPA2-only cameras

Opening ports on the router to make it work again is the wrong fix. Makers also retire apps and cloud services for older recorders, and an unupdated system is a weak spot on your network as well as a reliability problem.

What not to do

A few quick fixes cost you settings, footage or a camera. Skip these.

  • Don’t factory reset the recorder. It wipes camera settings, motion zones and often the admin password, and on some models the footage.
  • Don’t pull the recorder’s plug while it’s writing. Use the shutdown option in its menu.
  • Don’t buy a new camera before you know it’s the camera. Most offline cameras are cable, power or network faults.
  • Don’t climb onto the roof or lean a ladder on the guttering to reach a camera.
  • Don’t install firmware from forums, unofficial sites or links in emails.
  • Don’t add a random PoE injector. Passive injectors and standard 802.3af or 802.3at PoE aren’t interchangeable, and the wrong one can damage a camera.

When to call us

Call us when the home checks don’t find it, or the fix needs a ladder. These are the usual signs:

  • A camera stays offline after a port swap and a restart
  • Several cameras keep dropping at once
  • The fault needs a ladder or the roof space
  • The recorder shows drive errors

We test with a known-good cable, camera and port, so you only pay to replace what has actually failed.

Common questions

Still stuck? Call 1300 224 027, 9 am to 8 pm, 7 days.

Why does my camera say offline in the app but work on the TV?

The recorder is still recording, but the app can't reach it. That's usually the home internet, the app sign-in or the maker's cloud service. Check your internet first, then log out of the app and back in.

Why did all my cameras go offline at once?

When everything drops together, look at what the cameras share: the recorder, a PoE switch, a power supply or the modem. A power cut or storm surge is the most common trigger. Restart each in turn and check for lights on the switch and recorder.

Can a storm damage security cameras?

Yes. Lightning and power surges can kill PoE ports on a recorder or switch, and sometimes the camera itself. If a camera comes back on a different port, the old port is probably damaged. Surge protection on the recorder's power is worth having.

Why won't my Wi-Fi camera connect to my new modem?

Wi-Fi cameras store the old network name and password, so they need to be added again in the camera app. Many only work on 2.4 GHz, and some older models can't join a network set to WPA3 only. A mixed WPA2/WPA3 setting usually solves that.

Can I view my cameras over Starlink?

Usually, yes, through the camera maker's app, which connects out through its own cloud service. Older setups that relied on port forwarding often stop working on Starlink, because standard plans don't give you a public IPv4 address.

Is my old analogue system worth fixing?

If one camera or one power supply has failed, often yes. If the recorder is old, its app no longer works and the picture is grainy, upgrading usually makes more sense. Existing coax can often be reused, which keeps the cost down.

Will I lose footage if the hard drive fails?

Recordings on a failed drive may not be recoverable, and nothing new is saved until the drive is replaced. If you need footage from a failing drive, stop using the recorder and call us before trying anything else.

Do you fix systems someone else installed?

Usually, yes. We check the brand and model first and tell you if a camera or recorder isn't worth repairing. Have the recorder's admin password ready if you can find it.

Reviews from TechBox customers

Real Google reviews.

Prompt, professional, and very helpful. Highly recommend.

CHRISTINE F., Google review

Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.

ruth d., Google review

Excellent professional service- very prompt home visit, quick diagnosis of my computer problem and then it was fixed and returned to my house next day. I will certainly use this company again.

ironbark v., Google review

Still not fixed? We’ll take it from here

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online