Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

How to fix

Printer offline? How to get it printing again on Windows, Mac and phones

Your printer is switched on, but your computer or phone says it's offline. These fixes start with a two-minute restart and work up to fixed addresses and port settings, with exact menus for Windows 11, macOS, iPhone and Android.

  • Easy
  • 10 to 30 minutes
  • 4 min read

Rather we fix it? Often within the first hour at our Mitchell workshop, with a fixed quote first.

Open 7 days, 9 am to 8 pm
“Prompt, professional, and very helpful. Highly recommend.”
CHRISTINE F., Google review
A home printer with a small orange warning light lit, a sheet of paper half fed, the Wi-Fi router on a shelf behind it

Key takeaways

  • 'Offline' usually means your computer can't reach the printer, not that the printer is broken. Most cases are a network or address problem.
  • A new modem, a changed Wi-Fi password or an NBN upgrade is the most common trigger. The printer keeps looking for the old network.
  • Print the printer's network configuration page. It tells you whether it's connected, to which network and at what address.
  • Phones and laptops must be on the same Wi-Fi as the printer: not guest Wi-Fi, not mobile data and not through a VPN.
What you’ll need: The printer's control panel or app, Your Wi-Fi name and password, Your router's admin login, for the address steps, A USB printer cable (optional, for testing).

Rather we just fix it?

Printing from every computer, phone and tablet in the house, with scanning that lands where you want it.

Printer setup1300 224 027

Try these fixes, in order

Start at the top. Most problems are solved in the first few steps. Tick them off as you go.

Stop and call us if: none of these work, the fault is probably hardware. Our printer setup service picks up where this guide stops.

Why your printer shows offline

When it went offline, and which devices can still print, narrows the cause down quickly.

What you noticeLikely causeThe fix
What you noticeOffline since a new modem or NBN changeLikely causePrinter still looking for the old Wi-Fi name or passwordThe fixReconnect it from the panel, WPS or the maker's app
What you noticeOffline after the router restartsLikely causeRouter gave the printer a new IP addressThe fixReserve its address in the router, then re-add it
What you noticeOffline every morning, fine after a restartLikely causeDeep sleep switches off Wi-Fi on some modelsThe fixUpdate firmware, adjust the sleep or Auto Off setting
What you noticeShows offline but prints when you tryLikely causeWindows status check (SNMP) failing on the portThe fixUntick SNMP Status Enabled under Configure Port
What you noticeTwo copies listed, one offlineLikely causeDuplicate entry left by a driver change or reinstallThe fixRemove the offline copy, keep the working one
What you noticeLaptop prints, phone can't find itLikely causePhone on guest Wi-Fi, mobile data, or Local Network blockedThe fixJoin the main Wi-Fi, allow Local Network for the app
What you noticeWon't join the Wi-Fi at allLikely cause5 GHz-only or WPA3-only network an older printer can't useThe fixTurn on 2.4 GHz, or WPA2/WPA3 mixed mode
What you noticeOffline only when the VPN is onLikely causeVPN sends local traffic away from your networkThe fixDisconnect, or allow local network access in the VPN
What you noticePrints over USB, not over Wi-FiLikely causeWeak signal or a network fault, not the printerThe fixMove it closer, add a mesh node or use Ethernet
What you noticeJobs go to an old or wrong printerLikely causeWindows choosing the default printer for youThe fixTurn off Let Windows manage my default printer

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Tried these and still stuck?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, and tells you whether it’s worth bringing in before you travel.

We only use your number to call you about this.

typical time to work through the fixes on this page
10-30 min
first hour of a home visit, then billed in 30-minute blocks
$189
open, 9 am to 8 pm, across Canberra and nearby NSW
7 days
Exploded technical drawing: inside a home printer

Inside a home printer

Most printer problems aren’t the printer.

  • Wi-Fi connectionThe usual cause of “printer offline”.
  • Print headClogs when a printer sits unused.Drawn in red: where we focus first
  • RollersWorn rollers cause jams and skewed pages.
  • CartridgesGenuine or compatible, set up correctly.

What "offline" really means

“Offline” means your computer asked the printer for its status and got no answer. The printer may be perfectly fine, with your computer simply looking in the wrong place.

Think in three layers and work through them in this order. Fix them in order and you’ll rarely need to reinstall anything.

  1. The printer on the network. Is it connected to your Wi-Fi at all? The network report from step 3 answers this in seconds.
  2. Your device finding it. Is your computer or phone looking at the right address, on the same network?
  3. The queue and driver. Is a stuck job, a paused queue or a duplicate printer entry getting in the way?

Wi-Fi, Ethernet, USB or Wi-Fi Direct?

How the printer connects decides how often it drops off. Here's the honest trade-off.

Swipe to compare

Wi-FiEthernet cableUSB cableWi-Fi Direct
Prints from phones and tabletsPartial
Shared by everyone at homePartial
Survives a modem or password changeNo, needs reconnecting
ReliabilityGood with a strong signalBestVery goodFiddly
Where the printer can goAnywhere with signalNear the router or a network pointNext to one computerWithin a few metres
Best forMost homesHome offices and busy printersOne computer, no networkVisitors, or no router

Whichever you choose for a networked printer, reserving its IP address in the router is the single best fix for repeat offline problems.

Why printers drop off home networks

These are the usual causes. After a network change, the printer is often the one device nobody reconnects.

  • A new modem or NBN change

    A connection upgrade or a new provider often brings a new modem with a new Wi-Fi name and password. Phones and laptops get reconnected straight away; the printer on the sideboard gets forgotten.

  • Changing addresses

    Routers hand out addresses that can change after a restart, a power cut or a router firmware update. If your computer added the printer by its old address, it now looks in the wrong place.

  • Wi-Fi bands and security

    Many home printers, especially older and budget models, only use 2.4 GHz. New routers and mesh systems running 5 GHz-only networks or WPA3-only security can leave them stranded.

  • Sleep settings

    Energy-saving sleep and Auto Off modes on some models switch off the Wi-Fi radio, and the printer doesn’t always rejoin cleanly.

  • Windows driver changes

    Since January 2026, Windows Update has largely stopped taking new third-party printer drivers for Windows 11. Since July 2026, Windows prefers its built-in IPP class driver. Most printers carry on fine, but a re-detected printer can turn up as a second copy, with the old copy showing offline.

Deeper checks

Moving the router out of a cupboard and onto an open shelf is often all a printer in the next room needs.
Moving the router out of a cupboard and onto an open shelf is often all a printer in the next room needs.

If the basic steps haven’t found it, these tell you which layer is at fault.

  • Open the printer’s own web page. Type its IP address from the network report into a browser on the same network. If the settings page loads, the network side is fine.
  • Look in your router’s device list. If the printer isn’t listed, it isn’t on your network, whatever its screen says.
  • Check the signal strength. A weak signal through an older Canberra home’s brick walls, or to a granny flat, needs a mesh node or a cable, not more restarts.
  • Try a USB cable. If it prints over USB, the printer’s fine and the problem is the network.
  • Ping it. On Windows, open Terminal and type ping followed by the printer’s address. Replies mean it’s reachable.

What not to do

Before we leave a home visit, printing and scanning are tested from every computer, phone and tablet in the house.
Before we leave a home visit, printing and scanning are tested from every computer, phone and tablet in the house.

A few common moves make things worse, and one is a well-known scam.

  • Don’t download drivers from “driver updater” sites; use the maker’s website or app, or Windows’ built-in driver
  • Don’t factory reset first: it wipes Wi-Fi settings and, on some models, scan-to-email and fax address books
  • Don’t move the printer to the guest network; your computers won’t see it
  • Don’t buy a new printer yet: most offline printers have a settings problem

Home offices and small businesses

Small offices have an extra problem arriving soon. Microsoft is turning off basic SMTP authentication by default at the end of December 2026.

  • Scan-to-email

    Many older multifunction printers send scans using a plain username and password. When that switches off, scans quietly stop arriving. Our Microsoft 365 service can move it to a supported method, or to a SharePoint or OneDrive folder.

  • Shared office printers

    A printer the whole office uses deserves a fixed address, firmware updates and its own place on the network. Our business networks work covers that.

When to call us

If the printer won’t join your Wi-Fi, keeps dropping off even with a reserved address, or you’d rather not log in to your router, we can sort it at home.

Visits are $189 for the first hour, then billed in 30-minute blocks, across Canberra and the nearby NSW region.

Common questions

Still stuck? Call 1300 224 027, 9 am to 8 pm, 7 days.

Why does my printer keep going offline?

The most common reasons are the router giving the printer a new address after a restart, a sleep setting that switches off its Wi-Fi, and a weak signal. Reserving the printer's address in your router and updating its firmware fixes most repeat cases. If the signal is weak, moving the printer, the router or adding a mesh node makes the difference.

My printer says it's connected to Wi-Fi, but my computer says offline. Why?

Your computer is probably looking for it in the wrong place, usually an old address or a WSD port that's stopped responding. A stuck print queue, a VPN or Windows' SNMP status check can also cause it. Remove and re-add the printer using its current IP address, and switch to a standard TCP/IP port if it keeps happening.

How do I find my printer's IP address?

Print a network configuration or wireless test report from the printer's Settings or Network menu, or look under Wi-Fi status on its screen. Your router's list of connected devices shows it too. Typing that address into a browser on the same network usually opens the printer's own settings page.

Can I print from my iPhone without installing an app?

Yes, if the printer supports AirPrint, and most network printers from the main makers do. Join the same Wi-Fi as the printer, open what you want to print and tap Share > Print. If the printer doesn't appear, restart it and check your phone isn't on mobile data or guest Wi-Fi.

Will my older printer still work with Windows 11?

Most will. Many network printers work with Windows' built-in Microsoft IPP Class Driver, and existing manufacturer drivers can still be installed. Microsoft has stopped adding most new third-party printer drivers to Windows Update, so for an older model, get the driver from the maker's own website if Windows can't find one.

Is it worth fixing an old printer, or should I buy a new one?

If it's an offline or setup problem, it's almost always worth fixing, because the printer itself is fine. If it's mechanical, such as a carriage jam or a failed print head on an inexpensive inkjet, a new printer often costs less. Think about running costs too: ink for some cheap printers costs more over a year than the printer did.

Can you set up my printer at home?

Yes. On a home visit we connect the printer to your Wi-Fi, reserve its address, set it up on each computer, phone and tablet, and check scanning works. Visits are $189 for the first hour, then billed in 30-minute blocks, across Canberra and the nearby NSW region, 7 days.

Reviews from TechBox customers

Real Google reviews.

Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.

ruth d., Google review

Excellent professional service- very prompt home visit, quick diagnosis of my computer problem and then it was fixed and returned to my house next day. I will certainly use this company again.

ironbark v., Google review

Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.

Steve P., Google review

Still not fixed? We’ll take it from here

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online