Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

Nintendo Switch repairs in Canberra for Switch, Lite, OLED and Switch 2

A Switch that won't charge, Joy-Con that drift, a game card that can't be read or a cracked screen. We repair the original Switch, Switch Lite, Switch OLED and Nintendo Switch 2 at our Mitchell workshop, test the console, dock and charger separately, and give you a fixed quote before any work starts.

“Very quick. Very efficient. Excellent value for money.”
Keith J., Google review
  • Open 7 days, 9 am to 8 pm
  • 90-day warranty
  • Quote before work
  • Console, dock and charger tested separately
  • Joy-Con sticks replaced, often same day
  • Original, Lite, OLED and Switch 2
  • Fixed quote before any work starts
  • 90-day warranty on parts and labour
A handheld game console opened on a repair bench with its back plate off, its detachable controllers beside it and a thumbstick module on a tray
Joy-Con drift
Confirmed before we start
Turnaround
Same day to 3 business days, depending on the part
Where
Mitchell workshop, open 7 days
Warranty
90 days, parts and labour

Rather we call you?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.

We only use your number to call you about this.

original, Lite, OLED and Nintendo Switch 2
Switch 1 and 2
for many Joy-Con stick swaps when the part is in stock
Same day
warranty on parts and labour for workshop repairs
90 days
open 9 am to 8 pm, with calls answered until 8 pm
7 days

Switch faults we fix

  • Won't charge, or charges only sometimes

    A worn USB-C port, a failed power-delivery chip, or a dock or charger at fault. We test each one separately.

  • Died after using a third-party dock

    Out-of-spec docks are the classic way to kill the charging chip on earlier models. It's a board-level repair, and usually fixable.

  • Joy-Con drift

    The stick reports movement you aren't making. Joy-Con sticks connect by ribbon cable, so a new module is a quick fix.

  • Game card can't be read

    Dirty or bent pins in the reader. It's a separate module on the original, Lite and OLED, and soldered to the board on Switch 2.

  • Cracked screen or dead touch

    The original and Lite have separate glass and LCD parts. The OLED's screen is one bonded assembly.

  • Battery drains fast, or the back is bulging

    Every Switch battery is glued in. A swollen one pushes the back cover or screen out and needs replacing promptly.

  • Joy-Con loose or not connecting

    Worn rail latches, bent contacts on the console's rail, or a tired Joy-Con battery.

  • No picture on the TV in the dock

    The dock, its HDMI port, or the video chip by the console's USB-C port. The Lite has no TV output by design.

  • Loud fan, heat or sudden shutdowns

    Dust in the fan and heat sink, worse in long docked sessions. A clean and fresh thermal paste usually sorts it.

  • Stuck on the logo after an update

    Usually software. Maintenance Mode can reinstall the update without deleting saves; if storage is failing, we tell you.

Pick the job. We confirm a fixed price for your exact model before any work starts.

What happens next

  1. Tell us the fault

    Call 1300 224 027 or start a repair ticket online. Tell us the model from the back of the console and whether you use a third-party dock or charger.

  2. We test and quote

    We test the console, dock and charger separately, find the actual fault and give you a fixed quote. Nothing goes ahead until you say yes.

  3. We repair it

    Battery disconnected first, ports and chips micro-soldered under the microscope, and sticks calibrated after fitting.

  4. Test and collect

    Charging, docked output, game cards, touch and both Joy-Con are tested in a game before we call you.

Exploded technical drawing: inside a controller

Inside a controller

Where drift comes from.

  • Thumbstick modulesWear in the sensors causes drift. Replaced or upgraded.Drawn in red: the part we replace most
  • Triggers and buttonsSticky after spills, worn after years of play.
  • BatteryShort sessions mean a tired battery.
  • Charging portLoose cables and no charge.

Charging faults: port, chip, dock or charger

Back plate off, the battery is disconnected before the charging board or sticks are touched.
Back plate off, the battery is disconnected before the charging board or sticks are touched.

“Won’t charge” is one of the most common Switch faults. It has four causes that look identical from the outside.

  • Worn USB-C port. From years of plugging in on the move.
  • Power-delivery chip. The M92T36 on earlier models, killed by a dock or charger that doesn’t follow the USB-C power standard.
  • Battery-charging chip. It can fail on its own.
  • Dock or charger. The console is fine, and the dock or charger has died.

So we test on our own charger, then our own dock, and only then yours. Charging in your hand but nothing on the TV points to the dock or the console’s video chip; dying the day a new dock arrived almost always means a damaged power chip.

The port and chips are soldered to the board on every model: micro-soldering jobs under the microscope with hot air. The dock side is on console HDMI port repair.

What you get with a Switch repair

Switch faults hide behind each other. A dead dock looks like a dead console, and a flat battery looks like a dead board.

  • Console, dock and charger split

    We test your Switch on our own charger and dock, then test yours, so you only pay to fix the part that has failed.

  • Board-level charging repairs

    Ports and power-delivery chips are replaced with hot air under the microscope, not swapped for a whole new board.

  • Joy-Con sticks calibrated

    New stick modules are fitted, calibrated in System Settings and tested in a game before you collect.

  • Swollen batteries first

    A bulging battery is removed safely before any other work, and the replacement goes in with new adhesive.

  • The right screen part

    Original and Lite take separate glass and LCD parts; the OLED takes a bonded assembly. You'll know which before you agree.

  • Saves treated carefully

    Most repairs don't touch storage. If the main board is involved, we tell you first, because saves not in the cloud live on the console.

  • No account needed

    We test with our own Nintendo Account and games. Keep your password to yourself.

  • 90-day warranty

    Parts and labour are covered. If something isn't right, we come back and make it right.

Joy-Con, rails and the Lite's built-in sticks

The USB-C port pins and the power-delivery chip are checked under magnification.
The USB-C port pins and the power-delivery chip are checked under magnification.

Joy-Con sticks wear out like every potentiometer stick, and they’re one of the easier Switch repairs. The module plugs into a ribbon connector, so there’s no soldering.

  • Joy-Con 2

    Also on a ribbon cable, and Nintendo has confirmed they aren’t Hall effect, so they drift too. They take longer: a glued plastic strip hides some screws and has to come off without cracking.

  • Switch Lite

    No detachable controllers. The sticks are the same ribbon-cable type, but reaching one means lifting out the battery, a speaker, a small board and the shoulder buttons. Longer, but routine.

  • Rails

    The metal latch on an original Joy-Con wears until it slides loose. Bent or grimy contacts on the console’s rail stop a Joy-Con connecting or charging when attached.

After fitting, we calibrate the new stick in System Settings and test it in a game.

What's wrong with my Switch?

Charging faults are the most misdiagnosed Switch problem. Here's how the symptoms split on the bench.

What you noticeLikely causeThe fix
What you noticeNo charging light, no responseLikely causeDeeply flat battery, worn port or power chipThe fixLong charge on the official adapter, then bench test
What you noticeCharges in hand, nothing on the TVLikely causeDock fault or the console's video chipThe fixDock and console tested separately
What you noticeStopped charging after a new dockLikely causePower-delivery chip damaged by an out-of-spec dockThe fixChip replaced under the microscope
What you noticeCharges only with the plug at an angleLikely causeWorn or loose USB-C portThe fixPort replaced with micro-soldering
What you noticeCharacter walks on its ownLikely causeWorn Joy-Con stick moduleThe fixCalibrate first, then replace the stick
What you noticeCard error on every gameLikely causeDirty or bent reader pinsThe fixClean the reader, or replace it
What you noticeBack cover or screen bulgingLikely causeSwollen batteryThe fixStop charging; battery replaced first
What you noticeLines, dead spots or no touchLikely causeDamaged LCD, OLED panel or touch glassThe fixThe screen part your model takes

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Screens: what your model takes

Whether the glass can be replaced on its own depends on your model. Before any screen job we check the battery, because a swollen one is a common reason screens crack or lift without a drop.

Model Screen build What a crack needs
Original Switch and Lite Separate touch glass over an LCD The glass alone if the picture is fine; the LCD too if there are lines, black patches or no picture
Switch OLED Panel and touch layer bonded as one The whole screen assembly

A screen protector over a scratched film hides light scratches. If a drink went over it, switch it off, don’t charge it, and read water damage repair.

Which Switch do you have, and what does it mean for repairs?

The four Switch designs come apart very differently, which is why the model changes the quote.

Swipe to compare

Switch (2017 and 2019)Switch LiteSwitch OLEDSwitch 2
Screen6.2-inch LCD5.5-inch LCD7-inch OLED7.9-inch 1080p LCD
Screen repairGlass and LCD replaced separatelyGlass and LCD replaced separatelyOne bonded OLED assemblyAsk us; parts still limited
ControllersDetachable Joy-ConBuilt inDetachable Joy-ConMagnetic Joy-Con 2
Stick replacementJoy-Con, on a ribbon cableConsole opened, parts lifted outJoy-Con, on a ribbon cableRibbon cable; slower to open
Game card readerSeparate boardSeparate boardSeparate board, with microSDSoldered to the main board
USB-C charging portSolderedSolderedSolderedTwo ports, both soldered
TV output
Card for gamesmicroSDmicroSDmicroSDmicroSD Express only
BatteryGlued; 2019 model runs longerGluedGluedHeavily glued, larger cell
Parts supplyGoodGoodGoodPartial

Not sure which you have? The model number is on the back: HAC-001 is the original, HAC-001(-01) the 2019 revision, HDH-001 the Lite, HEG-001 the OLED and BEE-001 the Switch 2.

Game cards, microSD and storage

Hot air and flux lift the old port or chip so a new one can be soldered on cleanly.
Hot air and flux lift the old port or chip so a new one can be soldered on cleanly.

A card error on every game, or a card that only reads when pressed, usually means dirty or bent pins in the reader.

  • Original Switch and Lite. The reader sits on a small board with the headphone jack, swapped as a module.
  • Switch OLED. That board also carries the microSD slot, and it’s swapped as one module.
  • Switch 2. The reader is soldered to the main board, a much bigger job that we quote case by case.

On older models, a failing microSD card causes corrupted data errors, and a new card from a reputable brand fixes it.

Switch models we repair

Parts for the original, Lite and OLED are easy to source. For Switch 2, we confirm parts when you book.

Nintendo Switch 2

  • Nintendo Switch 2
  • Switch 2 dock
  • Joy-Con 2
  • Switch 2 Pro Controller

Nintendo Switch OLED Model

  • Switch OLED
  • OLED dock with LAN port

Original Nintendo Switch

  • Switch (2017)
  • Switch (2019 battery revision)
  • Original Switch dock

Nintendo Switch Lite

  • Switch Lite

Controllers

  • Joy-Con (L) and (R)
  • Joy-Con 2 (L) and (R)
  • Nintendo Switch Pro Controller

Switch 2: what we can do today

The Switch 2 is the newest console we see and the hardest to repair. Parts supply is still thinner than for older models.

  • Harder

    The battery is heavily glued, and both USB-C ports and the game card reader are soldered to the main board.

  • Easier

    The fan is screwed in and replaceable, the microSD Express reader is a separate module, and the Joy-Con 2 stick is still a potentiometer on a ribbon cable.

Otherwise, tell us the fault when you book and we’ll confirm parts before you make the trip to Mitchell. The same goes for the Switch 2 dock, with its own cooling fan and HDMI port.

Try this first

Plenty of 'dead' Switches are just deeply flat or stuck. These steps are safe on every model.

Stop and call us if: If the back or screen is bulging, the console gets hot without charging, or it smells odd, stop charging it and bring it in. A swollen battery comes first.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Duvi came out to fix my computer today and I'm so very happy to say that it is now working again! I'm so grateful as Duvi saved me thousands of dollars because a major electronics chain told me i needed a new computer.

Maree W., Google review

Prompt, professional, and very helpful. Highly recommend.

CHRISTINE F., Google review

Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.

ruth d., Google review

Questions about Nintendo Switch repairs

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
Can you fix Joy-Con drift?

Yes. Drift is a worn stick module, and on Joy-Con and Joy-Con 2 the stick connects by ribbon cable, so there's no soldering. An original Joy-Con is a quick job; a Joy-Con 2 takes longer because a glued strip hides some of its screws. We calibrate the new stick and test it in a game. For original Joy-Con, Hall effect sticks are an option if you want one that doesn't wear the same way.

Should I go to Nintendo for Joy-Con drift first?

If the Joy-Con are still under Nintendo's warranty, check with Nintendo first. Faults like drift may also be covered by the consumer guarantees under Australian Consumer Law, and the ACCC's website explains how they work. If those don't apply, a Joy-Con stick is often a same-day repair when the part is in stock.

My Switch stopped charging after I used a different dock. Can it be fixed?

Usually, yes. Docks that don't follow the USB-C power standard can damage the power-delivery chip, especially on the 2017 and 2019 models. We replace the chip, and the port if it's damaged too. Please stop using that dock, or it can damage the new chip.

Can you replace a Switch OLED screen?

Yes. The OLED's panel and touch layer are one bonded assembly, so a crack means replacing the whole screen. Leave the factory anti-shatter film alone until then: Nintendo warns against peeling it off, because it holds broken glass together.

Do you repair the Nintendo Switch 2?

Yes, and we look at each one case by case. Its USB-C ports and game card reader are soldered to the main board and parts supply is still thinner than for older models, so we confirm parts when you book. If it's still under Nintendo's warranty, check with them first.

Will I lose my saves?

Stick, screen, battery and port repairs don't touch storage. Saves live on the console, and Nintendo Switch Online backs up most games but not all. If a repair involves the main board, we tell you before we start.

Can the sticks on a Switch Lite be fixed?

Yes. They're the same style of stick as a Joy-Con, on a ribbon cable, but they sit inside the console. We open it and lift out the battery and a few other parts to reach them, so it takes longer than a Joy-Con. It's still a routine repair.

Why won't my Switch read game cards?

Usually dirty or bent pins in the reader. If every card fails in your console but works in another, the reader is the fault. On the original, Lite and OLED it's a separate module that we swap; on the Switch 2 it's soldered to the main board, so we quote it case by case.

Do you need my Nintendo Account password?

No. We test with our own account and games. Bring the console, the Joy-Con and, for charging or TV faults, the dock and charger you normally use.

Get it booked in today

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online