Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

NBN connection setup in Canberra, from the box on the wall to every room

The NBN technician has gone, the connection box is on the garage wall and nothing is online yet. Or you've just moved in and can't tell whether the last owner's service is still live. We connect the modem to the right port with the right settings, get the Wi-Fi out of the garage and into the rooms you use, and reconnect your phone, TV and printer before we leave.

“Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.”
ruth d., Google review
  • Open 7 days, 9 am to 8 pm
  • Quote before work
  • Fibre, copper and fixed wireless connections
  • Router moved out of the garage where cabling allows
  • Wi-Fi tested in the rooms you actually use
  • Home phone and alarms planned before the switch
  • 7 days, calls answered until 8 pm
A white fibre NBN connection box on a garage wall with its power supply below and a single green cable running up the wall
First hour
$189 first hour
Turnaround
Often within the first hour
Where
Homes across Canberra and nearby NSW

Rather we call you?

Leave your number. A Canberra technician calls back 9 am to 8 pm, 7 days.

We only use your number to call you about this.

the fibre box port most NBN services are activated on
UNI-D1
for the first hour at your home, then 30-minute blocks
$189
usually enough to connect, cover the house and reconnect devices
1 visit
visits, including weekends
7 days

When an NBN setup visit helps

  • The NBN technician has just left

    The connection box is in, the lights are on, and the modem is still in its box or blinking orange.

  • You've just moved house

    You're not sure what connection the new place has, whether the old service is still active, or where the modem should plug in.

  • Upgraded from copper to fibre

    A new fibre box replaced the phone socket connection, and your old modem may not suit it.

  • Plugged in, but no internet

    Usually the wrong port, the wrong connection settings for your provider, or a service that isn't active yet.

  • The box is in the garage

    Common in newer homes in Gungahlin and Molonglo. The Wi-Fi starts at the far end of the house unless cabling or mesh moves it.

  • Slow or dropping on a copper line

    Fibre to the node and curb connections lose speed to old filters, extension sockets and tired phone cables.

  • Home phone not working

    Phone services now run through the modem, so the handset needs to plug into the right port with the right settings.

  • A medical or monitored alarm

    Some alarms rely on a phone service. They need checking with the alarm provider before and after the change.

  • Everything needs reconnecting

    A new modem means a new network for the TV, printer, smart plugs, doorbell and cameras.

Pick the job. We confirm a fixed price for your exact model before any work starts.

  • NBN connection setup visit

    Modem connected, provider settings entered, speed tested at the box

    Turnaround
    Often within the first hour
    Price
    $189 first hour
  • Each additional 30 minutes

    Home phone, extra devices, TVs, printers and smart-home gear

    Turnaround
    Billed in 30-minute blocks
    Price
    Then per 30 min
  • Mesh Wi-Fi installation

    When the connection box is at one end of the house

    Turnaround
    Usually a single visit
    Price
    Priced for your model

What happens next

  1. Tell us the address

    Call 1300 224 027 or use the form. Tell us your connection type if you know it, your provider and what modem you have.

  2. We gather your settings

    We check your modem suits the connection and get the settings your provider uses before we arrive.

  3. Connect and test at the box

    Right port, right settings, then a wired speed test so we know what the NBN is delivering.

  4. Wi-Fi, phone and devices

    The router goes where it covers the house, then the phone, TV, printer and smart devices are reconnected and tested.

Exploded technical drawing: wi-fi in every room

Wi-Fi in every room

Where mesh nodes go in a typical Canberra home.

  • RouterMoved out of the cupboard where possible.
  • Mesh nodesOne per floor or zone, ideally wired back.Drawn in red: where we focus first
  • Brick and foilThe walls that block signal in older homes.
  • Outdoor reachGranny flats, studios and the backyard.

Where NBN's job ends and yours begins

An NBN connection has three owners, and knowing which to call saves hours on hold. We tell you which side a fault sits on.

  • NBN

    The line to your home and the equipment NBN installs: the fibre box, the fibre to the curb connection device, or the fixed wireless antenna and box.

  • Your provider

    Runs the service over that line and raises faults with NBN when NBN’s side breaks.

  • You

    Everything from the modem inward, where we work: router, Wi-Fi, wall cabling and devices. Healthy box but no internet? The fault is almost always here.

What an NBN setup visit covers

NBN's job finishes at the connection box or the wall socket. Ours starts there and finishes in the rooms you use.

  • The right port and settings

    The active UNI-D port on a fibre box, and your provider's WAN settings: automatic, PPPoE sign-in or a VLAN number.

  • Copper given every chance

    Main socket only, old filters removed, a short new cable, and line sync and noise margin checked before we leave.

  • Router out of the garage

    Existing data points and the patch panel used to put the router in the middle of the house.

  • Speed tested two ways

    A wired test at the router shows what NBN delivers, then a Wi-Fi test shows what reaches each room.

  • Home phone moved across

    Your handset on the router's phone port with your provider's voice settings, tested with a real call.

  • Alarms checked

    We ask about medical and monitored alarms first and plan around them with you and your alarm provider.

  • Devices reconnected

    TVs, printers, smart plugs, doorbells and cameras moved to the new network and tested.

  • Secured from day one

    A strong Wi-Fi password, WPA3 where your devices support it, and the default admin password changed.

  • Notes left behind

    Which port is live, what the lights mean, and who to call for which fault, written down for next time.

Moving house: what to check first

A fibre connection box on a garage wall: the starting point, and often the worst place for the Wi-Fi.
A fibre connection box on a garage wall: the starting point, and often the worst place for the Wi-Fi.

Before moving day, find out what connection the new address has. Check the rest on key day.

  1. Check the service class. Any provider can see it. On fibre, class 3 means the box is in, usually a plug-in job; classes 1 and 2 need a technician first.
  2. Look on key day. Fibre box, connection device or just a phone socket? Any modem left behind? An old service still running won’t block yours.
  3. Call the alarm provider. A medical or monitored alarm may need its connection changed before you switch it on.
  4. Check the modem. A modem from a copper connection won’t plug into a fibre box without a WAN port.

Why isn't my NBN working?

The lights on the NBN box and the modem usually point straight at the cause.

What you noticeLikely causeThe fix
What you noticeFibre box Optical light off, or Alarm light redLikely causeNo signal on the fibre, or a fault on NBN's sideThe fixProvider raises a fault, and NBN sends a technician
What you noticeBox lights normal, router shows no internetLikely causeWrong UNI-D port, or the wrong WAN settingsThe fixMove to the active port and enter your provider's settings
What you noticeNode or building modem's DSL light keeps flashingLikely causeNot syncing: wrong socket, old filter or faulty cableThe fixMain socket, filters out, new short phone cable
What you noticeCopper line syncs, but slowlyLikely causeLong copper run, extension sockets or corroded jointsThe fixRead the line statistics, then isolate extension wiring
What you noticeDrops out after heavy rainLikely causeWater in a pit or a corroded copper jointThe fixLog the dropout times, and the provider raises a line fault
What you noticeFibre to the curb dead after renovationsLikely causeConnection device unplugged from power or moved socketThe fixBack on its original socket, with power
What you noticeFast near the garage, weak in the bedroomsLikely causeRouter sitting beside the NBN boxThe fixRouter moved via data cabling, or mesh Wi-Fi added
What you noticeHome phone silent since the switchLikely causeHandset in the wrong port, or voice not set upThe fixHandset into the router's phone port, voice settings entered

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

After an upgrade from copper to fibre

A fibre box placed in a hallway nook instead of the garage, so the router beside it sits mid-house.
A fibre box placed in a hallway nook instead of the garage, so the router beside it sits mid-house.

NBN has upgraded many fibre to the node addresses to full fibre. A box goes inside, and the old phone socket stops carrying your service.

  • Where the box goes. One in the hallway or study beside a power point beats the far end of the garage. The installer usually asks.
  • The router. It now takes a network cable from the box; many VDSL2 modem routers can switch a port to WAN duty.
  • Older routers. If yours can’t, it’s often time to replace a router well out of updates.
  • Your home phone. It moves to the router’s phone port with your provider’s voice settings, so a router without one decides your replacement.

What each NBN connection type needs

Your connection type is set by NBN, not your provider, and it decides what your modem plugs into.

Swipe to compare

Fibre to the premisesFibre to the curbFibre to the node or buildingFixed wireless
NBN equipment insideConnection box with a power supplyConnection device on the phone socketNone, just the wall socketConnection box, plus a roof antenna
Your modem plugs intoThe active UNI-D portThe connection device's network portThe main phone socketA UNI-D port on the box
Modem you needRouter with a WAN portRouter with a WAN portVDSL2 modem routerRouter with a WAN port
Power for NBN gearBox on its own power supplyDevice on a power pointNone neededBox on its own power supply
Router can sit away from the NBN gearYes, via data cablingYes, via data cablingPartialYes, via data cabling
Speed depends mostly onThe tier you chooseA short copper runCopper length and conditionSignal and tower load
Common first-day snagCable in the wrong portDevice unplugged or on the wrong socketOld filters and extension socketsBox power or antenna alignment

Not sure which you have? A fibre box on the wall means fibre to the premises. A small device plugged into the phone socket means fibre to the curb. Just a phone socket usually means fibre to the node, or the building in an apartment block. Moving from a cable (HFC) area interstate? That works like fibre: a connection box and a router with a WAN port.

Getting the router out of the garage

Up high and out in the open, with the signal tested in the bedrooms before the cables were clipped.
Up high and out in the open, with the signal tested in the bedrooms before the cables were clipped.

In many newer Gungahlin and Molonglo homes, the fibre box sits in the garage beside a data cabinet cabled to the lounge, study and bedrooms.

Those cables are the best way to move the Wi-Fi.

A patch lead at the cabinet connects the box to the hallway or lounge cable, and the router plugs into that wall point. Cables aren’t always labelled, so we test each run first.

Plug it in yourself, or book a setup visit?

Plenty of fibre connections are a simple plug-in. Here's where a visit earns its keep.

Swipe to compare

Plug it in yourselfTechBox setup visit
Simple fibre plug-in, router in a good spot
Router moved out of the garage via data cablingPartial
Copper line checked for filters and extension socketsPartial
Home phone and alarms plannedPartial
Wi-Fi tested in every room
TV, printer and smart devices reconnectedYou do it
CostFree$189 for the first hour
Best forA central fibre box and a handful of devicesGarage boxes, copper lines, phones, alarms and busy households

If yours is a simple plug-in, do it yourself and call us only if something doesn't come up. We'd rather you saved the visit.

Copper connections: small things that cost speed

On fibre to the node, curb or building, speed depends on the copper from the street to your first device, house wiring included.

At the socket

  • Modem or curb device in the main socket
  • ADSL-era filters removed
  • Double adaptors removed
  • A short new phone cable

Line statistics on node and building connections

Line statistic What it tells you
Sync rate What the line achieves now
Attainable rate What it could reach
Signal-to-noise margin Headroom; a low margin explains dropouts

On fibre to the curb, your provider runs a line test instead. Dropouts after heavy rain often mean water in a pit or a corroded joint: your provider raises it with NBN, and a log of dropout times makes the case.

Extra phone sockets on the line can weaken the signal. Isolating them is a registered cabler’s job, and we’ll say first if it’s worth it.

Fast fibre tiers and what your router can carry

Since NBN lifted its faster fibre tiers in September 2025, plans well above 100 Mbps are common on fibre to the premises, so the router becomes the limit before the line does.

A gigabit WAN port tops out around 940 Mbps of real throughput; the fastest tier needs a multi-gig port. Wi-Fi is tighter still: a phone two rooms away on Wi-Fi 6 rarely tests near a gigabit.

So we test twice

  • With a cable at the router, for what NBN delivers
  • On Wi-Fi in each room, for what reaches you

A large gap means the fix is Wi-Fi, not a faster plan.

Try this before you book

These checks are safe, take five minutes and sort out a surprising number of first-day problems.

Stop and call us if: If the Alarm light stays red, the box has no lights at all, or the outdoor box or cable has been damaged, don't open or move it. That's NBN equipment, and your provider books an NBN technician. If you're with TechBox Internet, call us and we'll take it up for you.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Very quick. Very efficient. Excellent value for money.

Keith J., Google review

Great friendly service, on time to solve the problem

Bruce W., Google review

Duvi came out to fix my computer today and I'm so very happy to say that it is now working again! I'm so grateful as Duvi saved me thousands of dollars because a major electronics chain told me i needed a new computer.

Maree W., Google review

Questions about NBN connection setup

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
My NBN box is in the garage. Can the router go somewhere else?

Usually, yes. Many newer homes have network cabling from the garage to the hallway, lounge or bedrooms, and a short patch lead at each end lets the router sit in the middle of the house. If there's no cabling, a mesh system with its main node beside the box spreads the signal. New cabling inside walls must be installed by a registered cabler, and we'll tell you if that's needed.

Which port do I use on the NBN box?

On a fibre box with several data ports, your provider activates one, usually UNI-D1. If the previous resident's provider used a different port, your service may be on that one, so your provider can confirm it. The UNI-V ports are only for phone services set up that way, and most phone services now run through the modem instead.

Do I need a new modem after a fibre upgrade?

Not always. A fibre box needs a router with a WAN port. Many VDSL2 modem routers used on copper connections have a port that can be switched to WAN, so they keep working after the upgrade. If yours can't, or it's old enough to have stopped getting updates, a new router is the better choice.

The previous owner's service is still active. What do I do?

Don't use their account. Sign up with your chosen provider for your address, and the new service replaces the old one when it's connected. If the address already has working NBN equipment, it's usually much quicker than a brand-new connection. If you'd like to use TechBox Internet, we can check the address for you.

Will my home phone still work?

Yes, once it's set up. Phone services on the NBN usually run through the modem's phone port using your provider's voice settings. The old wall socket no longer carries a phone line on fibre. If you change modems, the voice settings need entering again, or the provider's own modem has to stay in place.

Why is my speed lower than my plan?

First check with a cable at the router. If it's close to your plan there, the gap is Wi-Fi, and placement or mesh fixes it. If it's slow at the router, the cause is the line, the evening busy period or the plan itself. On the fastest fibre tiers, a router with a gigabit port tops out at around 940 Mbps.

Does the NBN work in a blackout?

No. The NBN box, the modem and the Wi-Fi all need mains power, so internet and home phone stop in a blackout unless they're on a battery backup. Keep a charged mobile phone for emergencies, and check with your alarm provider how a medical or monitored alarm behaves without power.

Can I set up the NBN myself?

Often, yes. A fibre box in a central spot with your provider's modem is a simple plug-in. A visit is worth it when the box is in the garage, you're on a copper connection, you have a home phone or alarm to move, or there are lots of devices to reconnect.

What does a setup visit cost?

On-site visits are $189 for the first hour, then billed in 30-minute blocks. A simple connection and Wi-Fi check often fits within the first hour. Moving the router through data cabling, setting up the home phone or reconnecting lots of devices can take longer.

Talk to a real Canberra technician

Call us 9 am to 8 pm, 7 days, or leave your details and we’ll call you back.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Prompt, professional, and very helpful. Highly recommend.”
CHRISTINE F., Google review

Request a call back

Leave your number and we’ll call you during opening hours.

Call backTB-·····

What’s it about?

What happens next

  1. We call you back, 9 am to 8 pm, 7 days.
  2. We tell you what it’ll take and what it costs before anything starts.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online