Starlink for business around Canberra
Cellar doors, farm-stays, construction sites, events and city offices that can't afford to go offline. We install Starlink as a main connection or a backup link, with a proper network behind it: guest Wi-Fi kept apart from your business devices, card payments that keep working and remote access planned from the start. TechBox is an independent installer, not Starlink or SpaceX.
“Very personable and professional attention to the problem. Would use again.”
- Open 7 days, 9 am to 8 pm
- Quote before work
- Guest Wi-Fi kept apart from POS and office devices
- Automatic failover for city offices
- Remote access and VPNs planned around CGNAT
- Temporary setups for sites and events
- Independent installer, open 7 days

- Starlink install
- Confirmed before we start
- Turnaround
- Planned around your trading hours
- Where
- Rural businesses, sites and Canberra offices
Rather we call you?
Leave your number. We call back 9 am to 8 pm, 7 days, to talk through your roof and the cable run.
- for most installs once the survey is done, booked around trading
- 1 visit
- business, payments, cameras and guests, each kept apart
- 4 networks
- with your NBN or fibre, so one cable fault rarely takes out both
- No shared lines
- visits and calls, with phones answered until 8 pm
- 7 days
Business setups we plan and install
Cellar doors and wineries
Tasting rooms, function spaces and outdoor tables that need card payments, bookings and guest Wi-Fi to work on a busy Saturday.
Farm-stays, B&Bs and venues
Guests expect to stream and video call. We give them their own network and keep it away from your bookings and accounts.
Construction sites and site sheds
A connection for the site office, cameras and plans on tablets, mounted so it can move with the project.
Events, markets and field days
Temporary installs with access points sized for the crowd, tested on site before the gates open.
Backup internet for city offices
Starlink as a second link on a dual-WAN router, taking over automatically when the NBN or fibre service drops.
Card terminals dropping out
Terminals at the edge of the Wi-Fi, or sharing a crowded network with guests. We give them a stable connection of their own.
Remote access that won't connect
Standard Starlink plans share public addresses between customers, which stops port forwarding and inbound VPNs working. We design around it.
Guest Wi-Fi mixed with business devices
One network for everything is a security risk. We separate guests, staff, payments and cameras.
Jobs and prices
Pick the job. We confirm a fixed price for your exact model before any work starts.
What happens next
Tell us how the business runs
Trading hours, card terminals, point-of-sale and booking systems, guest numbers, cameras, and anything staff need to reach remotely.
Survey and design
We check the sky from candidate dish spots, then design the network: failover, separate networks for guests and payments, and how remote access will work.
Install around your trading hours
We schedule drilling and cable runs around your trading hours where we can, and keep your existing connection running until the new one is ready.
Test failover and hand over
We unplug the main connection to prove failover works, check card terminals and remote access, and show you what to watch in the Starlink app.

Planning a rural property
Internet that reaches the house, the office and the shed.
- Dish locationPicked after an obstruction check through the seasons.Drawn in red: where we focus first
- House Wi-FiMesh nodes for brick walls and long homes.
- Link to the shedA point-to-point link or buried cable for outbuildings.
- Backup powerA small UPS keeps the internet up through short outages.
Planned around how you trade

The dish is the easy part. What matters is card payments on a busy Saturday, guests kept off your booking system, and staff reaching what they need off site.
You buy the kit and plan from Starlink in the business’s name; we survey, install and build the network. Most sites use the Standard kit, with a higher-performance kit for heavy use and harsh conditions, and the Mini for portable setups.
What a business Starlink install includes
Mounting the dish is the quick part. The planning behind it is what keeps payments, guests and remote staff working.
Surveyed from the dish spot
Obstructions checked from the real mounting height, allowing for summer leaf and the shed you're planning next year.
A business router behind it
The Starlink router goes into bypass mode, and a business-grade router and access points run the network.
Separate networks
Business, payments, cameras and guests on their own VLANs, with guest devices isolated from each other.
Payments put first
An access point where the terminals are actually used, and payments given priority over guest streaming.
Failover proven
Where there's a second connection, we pull the main link's cable and watch the switch-over happen.
Remote access that works
Cloud-relayed apps, outbound VPNs or IPv6, chosen to suit CGNAT, with strong sign-in on all of it.
Power planned
A UPS sized for the dish, router and switch, so a short blackout doesn't stop trading.
Mounts that move
Mast brackets and ballasted frames for site sheds and events, with no roof penetrations needed.
Handover notes
Which network is which, what the lights mean and who to call, left with whoever runs the site.
Cellar doors, venues and accommodation

The Canberra District wine region spans Murrumbateman, Hall, Gundaroo, Bungendore and Lake George, and many cellar doors sit beyond reliable fixed line.
A typical cellar door runs
- Card terminals at the bench and outdoor tables
- Cloud bookings and wine club software
- Guest Wi-Fi
- Cameras on the cellar and car park
Stone, timber and rammed-earth walls block Wi-Fi far more than an office, so we place and cable access points instead of one back-office router. See hospitality and retail for a venue’s other IT.
What's wrong with our business Starlink?
Most business Starlink complaints aren't the satellite. They're coverage, crowding, power or addressing.
Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.
Construction sites and events
A site office needs plans, email, project software and often cameras from week one, long before a fixed line. Starlink can run once the shed is in.
- Mounts that move. A shed mast bracket, a ballasted frame with no penetrations, or a pole or mast mount to clear cranes.
- Power and security. Site supply or generator with a UPS; dish out of reach, router locked in the office.
- Cameras on their own network. See business CCTV.
- A plan that moves. Residential plans are tied to one address.
For field days, markets, weddings and festivals
- Survey in advance. Everyone shares the one connection, so we also plan power with a backup.
- Put payments first. Then ticketing and organisers; limit or drop public Wi-Fi if it can’t carry the crowd.
- Test on site. The whole setup, before the gates open.
Builders, see trades and construction.
How Starlink fits different businesses
The same dish does four quite different jobs. The plan around it changes with the site.
Swipe to compare
| Cellar door or venue | Construction site | Event or field day | City office | |
|---|---|---|---|---|
| Starlink's role | Main connection | Main connection until fixed line arrives | Main connection, for a day or a weekend | Backup to NBN or fibre |
| Usual mount | Mast or wall bracket on the building | Shed mast or ballasted frame | Ballasted frame or temporary mast | Roof mount, with building approval |
| Power | Mains, with a UPS | Site supply or generator, with a UPS | Generator or battery, with a backup | Mains, with a UPS on both links |
| Networks | Business, payments, cameras, guests | Site office and cameras | Payments, ticketing and organisers first | The office's existing network |
| Guest Wi-Fi | Yes, isolated and limited | Usually not needed | Limited | Already in place |
| Plan must allow | Use at one fixed address | Moving between sites | Use away from a home address | Use at one fixed address |
| Main thing to plan for | A wedding-sized Saturday crowd | Theft, dust and moving the dish | Crowd size and power | Data use in a long outage |
Plan names and inclusions change often. We check what suits your site before you buy, and the plan itself sits between your business and Starlink.
Starlink as failover for city offices

Starlink shares none of the cables, pits and exchanges your NBN or fibre depends on, so a cable cut in the street doesn’t touch the dish on the roof.
A dual-WAN router checks the internet is reachable, switches to Starlink when it isn’t and back on recovery. Phones, payments and cloud apps go first; big uploads wait.
Starlink's own router, or a business router behind it?
The Starlink router is built for homes. For a business taking payments or hosting guests, it usually hands over to proper network gear.
Swipe to compare
| Starlink router on its own | Our pickBypass mode with a business router | |
|---|---|---|
| Separate VLANs for payments, cameras and guests | ||
| Automatic failover to a second connection | ||
| Outbound VPN to head office or the cloud | ||
| Firewall rules between networks | ||
| Coverage through stone and brick | One router, plus Starlink mesh | Access points placed and cabled per room |
| Visible to whoever looks after your IT | Through the Starlink app | Yes, with logs and alerts |
| Setup effort | Plug in and go | A planned install |
| Suits | A small office with a few staff and no guests | Venues, multi-building sites and anything taking payments |
In bypass mode the Starlink router's Wi-Fi switches off. Turning bypass off again usually needs a factory reset, so we set it once and leave it.
CGNAT, remote access and VPNs
On standard plans Starlink uses carrier-grade NAT (CGNAT) for IPv4, sharing a public address among many customers. A router WAN address between 100.64.0.0 and 100.127.255.255 shows it.
Browsing, email, cloud apps and calls start from your end and work. Port forwarding to a camera recorder, a site VPN server or remote desktop to an office PC don’t.
The ways around it, in the order we'd choose
- Connect outwards. Put the VPN at head office or a cloud service with a public address; the site connects out.
- Cloud-relayed apps. Many cameras and remote tools connect out to the maker’s cloud. See CCTV remote viewing setup.
- IPv6. Starlink supports it, and many services and VPNs reach the site directly over it.
- A public IP plan, if Starlink currently offers one that suits. Check before you buy.
Payments, guests and the network behind the dish
The Starlink router goes into bypass mode and a business router separates office, payments, cameras and guests. These details decide the busiest day.
- Wire every fixed terminal. Cabled counter terminals don’t fight guests for airtime.
- Size the guest address pool. A wedding of a hundred brings two or three devices each: we widen the range and shorten leases.
- Cap each guest device, so one phone backing up photos can’t take the lot.
- Keep office PCs quiet. Updates overnight, not at 11 am on a Saturday.
Ask providers whether terminals fall back to their own SIM (useful only with mobile signal) and whether point-of-sale takes orders offline.
Before the site survey
Half an hour with these questions means the survey goes on design, not discovery.
What Canberra customers say
Real Google reviews. We ask every customer, every time.
Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.
Tech Box saved the day!!!!!!!!!!! With my laptop on the brink of despair, I turned to Tech Box for help, and they delivered beyond expectations. Their expert team swiftly diagnosed and resolved the issue, displaying a level of professionalism that's truly commendable.
Very personable and professional attention to the problem. Would use again.
Questions about Starlink for business
Straight answers. More in our questions and answers.
Can Starlink back up our NBN or fibre connection?
Yes. A dual-WAN router uses your NBN or fibre service as the main link, switches to Starlink automatically when it drops, and switches back when it returns. Because Starlink doesn't share cables, pits or exchanges with your main service, a fault on one rarely affects the other.
What is CGNAT and why does it matter?
CGNAT (carrier-grade NAT) means your connection shares a public IPv4 address with other customers. Outgoing traffic works normally, but nothing on the internet can start a connection to you, so port forwarding, inbound VPNs and direct remote desktop or camera access won't work. We plan around it with IPv6, VPNs that connect outwards, or a plan that includes a public address.
Can we get a public IP address on Starlink?
It depends on the plan. Standard Starlink plans use CGNAT, and some business plans have offered a public IP option. Plans change, so confirm with Starlink before you buy if you need one, although a well-designed VPN often means you don't need it at all.
Will our card terminals work over Starlink?
Card terminals that connect over Wi-Fi or Ethernet work over any internet connection, including Starlink. The usual problems are weak Wi-Fi at the counter and terminals sharing a network with guests. Many terminals can also fall back to their own mobile connection, so ask your payment provider whether yours can, and check there's mobile signal where you use it.
Can guests use the same Starlink connection?
Yes, on a separate guest network. Guests get internet access and nothing else, with no view of your point-of-sale, office computers or cameras. We can also limit guest bandwidth, so a few people streaming can't slow down payments and bookings.
Can you set up Starlink for an event or a temporary site?
Yes. We survey the site beforehand, plan power and mounting, size the access points for the expected crowd and test on the day before the gates open. Residential Starlink plans are tied to a service address, so a site or event usually needs a plan that allows use elsewhere.
Will our VoIP phones work over Starlink?
In most cases, yes. Cloud phone systems make outbound connections, so CGNAT doesn't stop them. On a failover setup, calls in progress usually drop at the moment of switch-over and the phones re-register on the backup shortly after, so we test that during handover.
Who looks after the network afterwards?
We can. Our business IT services cover ongoing network care, either as part of a managed IT agreement or on a pay-as-you-go basis. Either way, you deal with the people who installed it.
Who do we buy the Starlink plan from?
From Starlink, in the business's name. TechBox is an independent installer, not part of Starlink or SpaceX. We help you work out which kit and plan type suits the site, then design and install the network around it.
More Starlink installation
- Starlink for farmsOne dish serving the homestead, sheds, yards and cottage, with the links between buildings planned first.
- Starlink as NBN backupA second connection that takes over by itself when the NBN drops, with power planned for blackouts.
- Move or re-mount a dishDish moved to clearer sky, a shaky DIY install made solid, or your kit reinstalled at a new address.
- Starlink site surveyA sky check from every likely dish spot, a mount and cable plan, and a written quote before install day.
- Roof and ridge mountsDish fixed into the roof framing, every hole sealed, and the cable run tidy to a router where Wi-Fi is needed.
- Pole and mast mountsDish lifted clear of the trees on a braced or concreted pole, with the cable buried in conduit and stock kept off it.
- Starlink Mini setupMini powered, mounted and tested for your home, ute or camp, with a power budget you can actually rely on.
- Starlink Wi-Fi extensionStarlink carried to far bedrooms, home offices, sheds and cottages with mesh, cable or a wireless link.
- Caravan Starlink setupStarlink fitted to your van: the right kit, a mount that survives dirt roads, sealed entry and 12 V power.
Starlink for business across Canberra and the region
Workshop in Mitchell, visits 7 days. Find your district.
- Belconnen27 areas
- Gungahlin17 areas
- Inner North Canberra13 areas
- Inner South Canberra11 areas
- Woden Valley13 areas
- Weston Creek8 areas
- Molonglo Valley5 areas
- Tuggeranong18 areas
- Fyshwick, Hume and east Canberra7 areas
- Rural ACT3 areas
- Queanbeyan and surrounds11 areas
- Yass Valley and Murrumbateman6 areas
- Bungendore, Wamboin and Braidwood6 areas
Get a mount plan and a fixed quote
Tell us about the property. We plan the mount, the cable run and the Wi-Fi so it works in every room and every season.
1300 224 027Calls answered 9 am to 8 pm, 7 days.
- Quote before any work starts
- Workshop in Mitchell, visits across Canberra
- If something isn’t right, we come back and make it right.
“Very quick. Very efficient. Excellent value for money.”



