How to fix Starlink obstructions and short dropouts
Short, repeated Starlink dropouts are usually something in the dish's view. Here's how to confirm it in the app, find the culprit and choose the cheapest fix that will last.
- Moderate
- 30 minutes, plus a day of dish data
- 4 min read
Rather we fix it? One visit, with a written plan after at our Mitchell workshop, with a fixed quote first.
Open 7 days, 9 am to 8 pm“Prompt, professional, and very helpful. Highly recommend.”
Key takeaways
- Confirm it first: outages labelled Obstructed in the app's outage history point to the dish's view, not the cable, power or Wi-Fi.
- Trust the dish's own obstruction map over the camera scan, but give it at least half a day of running before you judge it.
- Deciduous trees fool winter checks. Recheck in summer, when they're in full leaf.
- Moving the dish a few metres is the cheapest fix to try. A ridge or pole mount is the fix that keeps working as trees grow.
Rather we just fix it?
A sky check from every likely dish spot, a mount and cable plan, and a written quote before install day.
Starlink site survey1300 224 027Try these fixes, in order
Start at the top. Most problems are solved in the first few steps. Tick them off as you go.
What's blocking my Starlink?
Match what you see in the app to the likely cause, then to the fix.
Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.
Tried these and still stuck?
Leave your number. A technician calls back 9 am to 8 pm, 7 days, and tells you whether it’s worth bringing in before you travel.
- cone of sky the current Standard and Mini dishes need clear
- 110°
- how often the network can switch your dish to another satellite
- 15 sec
- of running in place before the obstruction map is worth reading
- 12+ hours
- cable in the Standard and Mini kits, the limit on moving the dish
- 15 m

Planning a rural property
Internet that reaches the house, the office and the shed.
- Dish locationPicked after an obstruction check through the seasons.Drawn in red: where we focus first
- House Wi-FiMesh nodes for brick walls and long homes.
- Link to the shedA point-to-point link or buried cable for outbuildings.
- Backup powerA small UPS keeps the internet up through short outages.
Why a few branches cause so many dropouts
A Starlink dish doesn’t lock onto one satellite. It’s handed between satellites crossing the sky in low orbit on a cycle measured in seconds, using a cone of sky about 110 degrees wide on the current Standard and Mini dishes.
Anything solid in that cone breaks the link each time a satellite’s path runs behind it. One branch doesn’t slow the connection; it interrupts it, so an obstruction shows up as drops of a few seconds, several times an hour.
Browsing and streaming
These hide most of it, because pages and video buffer ahead.
Video calls, games and remote work
Video calls freeze, online games disconnect and a remote desktop session to the office drops. If you work from home, that difference is the whole problem.

Camera scan or obstruction map?
The app gives you two ways to look for obstructions, and they answer different questions.
Swipe to compare
| Check for Obstructions (camera scan) | Obstruction map (dish data) | |
|---|---|---|
| Works before the dish is installed | ||
| Based on real satellite passes | No, an estimate from your camera | |
| Accurate at the mounting height | Only if you scan from there | |
| Shows which direction is blocked | ||
| Time it takes | A few minutes | Several hours, ideally a day |
| Allows for trees leafing up later | ||
| Best used for | Choosing between spots | Confirming a spot works |
Neither tool can see the future. Recheck deciduous trees in summer and fast-growing gums once a year.
Reading the obstruction map properly

The map records where the dish has actually lost signal as satellites pass. Red marks a blocked patch; the more red in one area, the more often passes are being cut.
- It needs time. An hour of data is a rough sketch. Leave the dish in place for at least half a day, ideally a full day, before deciding anything.
- Old data misleads. After a move, the map may still show sky from the old spot. Reset it if your app offers that, or give it a fresh day.
- Dots and blocks differ. A sprinkle of red near the edge often means thin outer branches. A solid band is a canopy, roofline or hill, and pruning outer twigs won’t clear it.
- It’s a record, not a forecast. The map can’t tell you what the poplar will look like in December.
Ways to clear an obstruction
Start with the cheapest change that will last, and be honest about how fast your trees grow.
Swipe to compare
| Move the dish | Ridge or roof mount | Pole or mast | Prune the tree | |
|---|---|---|---|---|
| Leaves the trees alone | ||||
| Keeps working as trees grow | Partial | Partial | ||
| Safe to do yourself | Partial | |||
| Relative cost | Lowest | Mid | Highest | Varies by tree |
| Main limit | Cable length and open sky | Roof type and condition | Footing, height and wind | Regrowth and tree rules |
| Best for | One tree on one side | Houses with a clear ridge | Blocks ringed by tall trees | One overhanging limb |
Moving or raising the dish often needs a longer cable. Starlink sells longer cables for some kits. Never cut and re-join one.
Canberra trees and the seasons
Trees cause more Starlink problems around Canberra than anything else, and each kind causes a different one.
Eucalypts
They keep their leaves, grow fast and drop limbs. Topping a gum to clear the view usually backfires: it sprouts dense, weakly attached regrowth that fills the gap again within a few seasons.
Pine and cypress windbreaks
Common on farms out towards Yass, Gundaroo and Bungendore, they block signal almost completely all year.
Deciduous trees
The elms, oaks, poplars, willows and fruit trees around older homesteads, along creeks and through established suburbs are the trap. A scan through bare winter branches can look clear; the same view in summer is a wall of leaves.
Good to know: Neighbours’ trees count too, and you can’t prune them without permission. A two-storey extension or new shed next door can also creep into view, so picture every tree in full leaf and a few years taller.
Mistakes that make it worse

These are the jobs we’re most often called to put right.
- A dish on the ground, its cable crushed in a window, with the lowest view on the property
- Cutting and re-joining the cable: a weak point that lets water in and may affect your Starlink warranty
- Bolting it to fascia or an old TV antenna mast: they flex in spring westerlies, so it loses its view
- Judging a deciduous tree in winter, then losing the connection in November
If the drops aren’t labelled Obstructed, or the map is clear and calls still freeze, the problem is elsewhere: see fixing Starlink disconnecting for cables, power and Wi-Fi.
When a survey saves you money
Call us when no spot within reach of the cable has clear sky, the scan is borderline, or the fix needs height.
Guessing gets expensive: a roof mount in the wrong place, a pole a metre too short, or a tree removed for nothing.
A Starlink site survey works through it in order:
- Check the real heights. We check the sky from the real mounting heights.
- Allow for growth. We allow for deciduous trees in leaf and for trees growing taller.
- Compare mounts and plan the cable. We compare mount options and plan the cable route to a sensible router position.
- Ridge or roof mountGets the dish above the problem on the roofline
- Pole mountGets the dish above the problem on its own pole
- Moving or re-mountingOften quicker than starting again
- Starlink installation guide for the Canberra regionKits, mounts and cabling in full
Read more
TechBox is an independent Canberra installer, not Starlink or SpaceX. Warranty claims on the kit itself go to Starlink through the app.
Common questions
Still stuck? Call 1300 224 027, 9 am to 8 pm, 7 days.
How much obstruction is too much?
There's no single number. Browsing and streaming cope with a little, because video buffers ahead. Video calls, online gaming and anything live notice every drop. If your outage history shows Obstructed drops during the hours you work, it's worth fixing, even if the percentage looks small.
Why does the camera scan disagree with the obstruction map?
The camera scan is an estimate taken from wherever you held the phone. The obstruction map is built from the dish's own data as satellites pass, from where the dish actually sits. If they disagree, believe the map, and rescan from the exact spot and height when you're choosing a new position.
Which way should the dish face?
Leave that to the app. The current Standard and Mini dishes guide you as you set them up, and the older motorised Standard Actuated dish aims itself. The obstruction map shows which parts of the sky matter at your place, which is more useful than a compass bearing.
Do rain and cloud show up as obstructions?
Not as red patches on the map. Obstructions are solid things such as trees, buildings and hills. Heavy rain, hail and thunderstorms can slow the connection or cause short drops while they pass, then it recovers.
Can I put the dish on a pole myself?
A short pole bracketed to a wall at ground-floor height can be a reasonable DIY job. Taller masts need a footing sized for the height and the wind, bracing or guy wires and sometimes earthing, and fitting them means working at height. That's where a professional install is worth it.
Do I need permission to prune a tree that's blocking Starlink?
Possibly. In the ACT, many larger trees are protected and major pruning or removal needs approval. In NSW, councils set their own rules, and native vegetation on rural land has extra controls. Check with the ACT Government or your council first, and use a qualified arborist.
Will the obstruction get worse over time?
Usually, yes. Gums and pines keep growing, and a tree on the edge of the view today can be well inside it in a few years. Check the obstruction map once a year, ideally in summer.
Is Starlink worth it if my block is surrounded by trees?
Often it still is, with the dish raised on a ridge or pole mount above the canopy. A site survey tells you before you spend money on mounts. If no spot on the property can see enough sky, we'll tell you so.
Repairs for this problem

Starlink site survey
Before anyone drills a hole, we find out where your dish can actually see the sky, now and in full summer leaf.

Pole and mast mounts
When no roof can see enough sky, a pole lifts the dish above the problem or moves it away from the trees.

Roof and ridge mounts
We mount Starlink dishes on corrugated iron, Colorbond, concealed-fix and tiled roofs across Canberra, rural ACT and the nearby NSW region.
Reviews from TechBox customers
Real Google reviews.
The service I have received from TechBox has been nothing but amazing!! I haven’t seen such service for years.I had a problem and asked for their help , from the beginning to the end they were tenacious working through the issues I had with my software. Thank you so much for your help TechBox. You people are most professional I will have no problem…
Very quick. Very efficient. Excellent value for money.
Great friendly service, on time to solve the problem
Still not fixed? We’ll take it from here
Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.
1300 224 027Calls answered 9 am to 8 pm, 7 days.
- Quote before any work starts
- Workshop in Mitchell, visits across Canberra
- If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”

