Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

Move or re-mount a Starlink dish in Canberra and nearby NSW

A dish that's lost its view to a growing gum, a gutter bracket that rocks in the westerlies, a cable squeezed through a window frame, or a kit that's moving house with you. We take it down, find clearer sky, mount it into solid structure and seal every hole we leave behind. TechBox is an independent installer, not Starlink or SpaceX.

“Very quick. Very efficient. Excellent value for money.”
Keith J., Google review
  • Open 7 days, 9 am to 8 pm
  • Quote before work
  • Obstruction check from the new spot before we move it
  • Old holes sealed, not just abandoned
  • Mounts fixed into rafters, studs or a footing
  • Kit reinstalled at your new address
  • Independent installer, open 7 days
A Starlink dish lying on a tarp on a roof beside its old, badly placed gutter mount, with a new pivot mount bracket ready to fit
On-site visit
$189 first hour
Turnaround
Usually one visit
Where
Rural ACT, Canberra and nearby NSW

Rather we call you?

Leave your number. We call back 9 am to 8 pm, 7 days, to talk through your roof and the cable run.

We only use your number to call you about this.

for most re-mounts on the same property
1 visit
for the first hour on site, then 30-minute blocks
$189
round, rectangular, Standard and Mini, each with its own mounts
4 dish types
open, with calls answered until 8 pm
7 days

When a dish needs moving

  • Obstructions that weren't there at install

    Gums put on growth every year and deciduous trees fill in by summer. A spot that was clear three years ago now drops video calls.

  • A DIY mount that moves in the wind

    Gutter brackets, fascia screws and old antenna masts flex in the spring westerlies. Movement shows up as dropouts, then as a dish on the lawn.

  • A cable through a window or door

    Pinched cables fail, and the gap lets in draughts, water and insects. We give it a proper sealed entry.

  • A dish still on its kickstand

    Fine for a test, not for living alongside dogs, mowers, kids and kangaroos. We get it up and out of reach.

  • Moving house

    We remove the kit cleanly, seal the old holes and install it at the new place, with a fresh obstruction check.

  • Reroofing or new solar panels

    The dish has to come off before the roofers or solar installers start. We take it down and refit it afterwards.

  • Selling or renting out the property

    Buyers, building inspectors and tenants notice unexplained holes. We remove the mount and seal it, or tidy the install if the kit stays.

  • Moving from an older dish

    The original round dish and the motorised rectangular dish use different mounts and cables from today's Standard kit. We swap the hardware over.

Pick the job. We confirm a fixed price for your exact model before any work starts.

  • Re-mount on the same property

    Dish moved to clearer sky, cable rerouted, old holes sealed

    Turnaround
    Then billed in 30-minute blocks
    Price
    $189 first hour
  • Fixing a DIY install

    Loose mounts, pinched cables and leaking entries made right

    Turnaround
    Usually one visit
    Price
    $189 first hour
  • Pole or mast for clearer sky

    Lifts the dish above trees the roof can't see past

    Turnaround
    Quoted once we've seen the site
    Price
    Priced for your model
  • Reinstall at your new address

    A full install at the new place, surveyed from scratch

    Turnaround
    Usually one visit
    Price
    Priced for your model
  • Take down before roof or solar work

    Removed before the trades arrive, refitted when they've gone

    Turnaround
    A short visit at each end
    Price
    $189 first hour

What happens next

  1. Send us photos

    Call 1300 224 027 or use the form. Send photos of the current mount, the cable entry and the trees around the dish, plus a screenshot of the obstruction map.

  2. Pick the new spot

    On site, we scan the candidate spots and agree the new position, cable route and router location with you before anything comes down.

  3. Move, mount and seal

    The dish comes down, the new mount goes into solid structure, the cable is rerouted and every old and new hole is sealed.

  4. Check and hand over

    We confirm the dish is online and the obstruction map is clearing, and check the Wi-Fi in the rooms you use.

Exploded technical drawing: a starlink install, part by part

What goes up on the roof, and why each bit matters.

  • The dishNeeds a clear view of the sky in every season.Drawn in red: where we focus first
  • Mount and mastRidge, pivot, wall or pole, chosen for the view and the wind.
  • Cable runClipped, protected and given a drip loop.
  • Weatherproof entrySealed where the cable goes into the house.
  • RouterPlaced where the Wi-Fi can reach, or wired to mesh.

Why dishes end up in the wrong place

The dish comes down onto a tarp beside its old gutter bracket, with the new pivot mount ready to go.
The dish comes down onto a tarp beside its old gutter bracket, with the new pivot mount ready to go.

Most kits are set up in an afternoon, wherever the cable happened to reach. It works, so it stays, until trees grow, spring westerlies arrive and the shortcuts show.

The DIY mounts we see most around Canberra

  • Gutter brackets. Thin steel held on with clips, flexing under the dish’s wind load and nudging its view each time.
  • Fascia screws. Older homes often have timber fascia gone soft at the joints; newer homes often have thin metal fascia never meant to carry anything.
  • Old TV antenna masts. High, but often rusted at the base, on tired guy wires, and not built for a flat panel in the wind.
  • The kickstand, permanently. Low, blocked by every fence and shrub, and within reach of dogs, mowers and kangaroos.

What a re-mount includes

Moving a dish is quick. Moving it so it stays put, stays dry and sees more sky takes a little longer.

  • Sky checked first

    We run the obstruction check from each candidate spot before anything comes down, so the move is a measured improvement.

  • Fixed into structure

    Rafters, purlins, studs or a concreted footing. Never gutter brackets, fascia boards or roof sheeting on their own.

  • Old holes sealed

    Every abandoned screw hole and cable entry is sealed with a suitable roofing sealant or a proper wall plate.

  • Cable rerouted, not cut

    If the cable won't reach, the router moves or a longer Starlink cable goes in. A join is a weak point.

  • Aimed and confirmed

    After the move, we check the dish is level, aimed the way the app asks, and the obstruction map is clearing.

  • The right mount for the dish

    Standard, Mini and older dishes take different mounts. We bring the matching one rather than adapting the wrong one.

  • New address, same care

    Moving house? Send photos of the new place and we plan the install before moving day.

Finding a better spot

A new spot trialled on the kickstand with the app's obstruction check before anything is drilled.
A new spot trialled on the kickstand with the app's obstruction check before anything is drilled.

A tree close by blocks far more of the dish’s view than a hill on the horizon. So two metres higher on the same roof can beat ten metres across the yard.

We start with the obstruction map and outage history in the Starlink app, then run the obstruction check from each candidate spot, including on the roof where it’s safe. In the order we try them:

  1. Higher on the same roof. Often the ridgeline, which clears trees that block a lower spot.
  2. The other roof plane or a gable wall. Useful when the trees are mostly on one side.
  3. A pole or mast. In the clearest patch of the yard, on a footing that suits the height and wind.

Does your dish need moving, or just a tweak?

The Starlink app usually tells you. Here's how we read what it shows.

What you noticeLikely causeThe fix
What you noticeShort dropouts, red patches on the obstruction mapLikely causeTrees or roofline in the dish's viewThe fixRaise or move the dish to clearer sky
What you noticeDropouts mostly on windy daysLikely causeMount flexing or the dish rockingThe fixRe-mount into rafters, studs or a footing
What you noticeFine in winter, worse every summerLikely causeDeciduous trees in full leafThe fixSurvey for summer leaf, then relocate
What you noticeCable chewed, cracked or kinkedLikely causeExposed run, cockatoos or a pinched frameThe fixNew Starlink cable, run in conduit or clips
What you noticeWater stain near the cable entryLikely causeUnsealed hole, no drip loopThe fixRe-seal the entry and add a drip loop
What you noticeSlower since moving houseLikely causeA busier area, or new obstructionsThe fixCheck the obstruction map first, then ask Starlink
What you noticeDish on the ground, working fineLikely causeNothing wrong yetThe fixMount it before a mower, dog or roo finds it

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Re-mounting without leaving leaks behind

Taking a dish down is easy. Leaving the old position watertight is the part that’s often skipped.

Surface How we leave it
Metal roof Old fixings in the crest replaced with roofing screws and new sealing washers, or sealed with neutral-cure sealant
Tiled roof Checked for tiles cracked by earlier foot traffic, and we tell you if any need a roofer
Brick New fixings into the brick itself with masonry anchors
Weatherboard Fixings into the studs, never just the cladding

New cable entries get a grommet or wall plate sized for the Starlink plug, which is much bigger than a network plug, plus a drip loop so water falls off before the hole.

Common DIY mounts vs a proper re-mount

Gutter brackets and kickstands are the usual DIY shortcuts. Here's why they don't last.

Swipe to compare

Gutter or fascia bracketKickstand on the groundOur pickPivot, wall or pole mount into structure
Holds steady in strong windPartial
Clear of trees and rooflinePartial
Out of reach of dogs, stock and mowers
Cable protected end to endPartial
FixingsInto thin gutter or soft fasciaNoneInto rafters, purlins, studs or concrete
Lasts years without attention
Easy to take with youPartial

A kickstand on the lawn is the right way to test a spot, and the wrong way to live with one.

What you can do yourself, and what's worth a visit

Some moves need no help at all. Here's an honest split.

Swipe to compare

Do it yourselfTechBox visit
Test new spots with the obstruction checkYes, including on the roof
Move a kickstand dish to a clearer patch of ground
Update your service address with StarlinkWe help you on your phone
Work safely on a roofOnly with fall protection
Fix a mount into rafters or purlinsPartial
Seal old penetrations so they don't leakPartial
Reroute the cable through walls and eavesPartial
Set a pole in a concrete footingPartial
CostParts onlyOn-site rate plus parts

If the dish only needs to move a few metres across the lawn, do it yourself and save the visit. Anything on a roof or a pole is worth getting right once.

Working around roofers and solar installers

Reroofing and solar are the most common reasons a well-placed dish comes down. Left in place, it risks a crushed cable or a mount refitted wherever was quickest.

  • Dish taken down before work starts
  • Cable route marked so nobody drills through it
  • Refitted once the roof is finished
  • Often a better spot, such as a clear ridge or unused southern plane
  • No need for the north-facing planes solar installers want

Related pages

Packages

Starting points we tailor to your property. Every package is quoted after a quick look.

Same-property move

A dish that needs clearer sky on the same block

  • Obstruction checks from candidate spots
  • Dish moved and mounted into structure
  • Cable rerouted, entries sealed, drip loops added
  • Old holes sealed
  • Outage history checked before we leave
Get this quoted

DIY install rescue

Kits put in quickly that now drop out, leak or rattle

  • Mount replaced or properly re-fixed
  • Pinched or exposed cable rerouted
  • Grommets, wall plates and drip loops added
  • Router moved for better indoor Wi-Fi
Get this quoted

Moving house

Taking your Starlink to a new property

  • Careful removal at the old place
  • Old penetrations sealed
  • Sky survey and full install at the new place
  • Wi-Fi set up for the new layout
  • Help updating your service address on your phone
Get this quoted

Before you move it

A few checks tell you whether the dish needs moving at all, and where it should go.

Stop and call us if: Stop before climbing onto a roof, lifting tiles or drilling into a pole. Don't cut, join or extend the Starlink cable, and stay off metal roofs when they're wet or frosty.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Duvi came out to fix my computer today and I'm so very happy to say that it is now working again! I'm so grateful as Duvi saved me thousands of dollars because a major electronics chain told me i needed a new computer.

Maree W., Google review

Prompt, professional, and very helpful. Highly recommend.

CHRISTINE F., Google review

Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.

ruth d., Google review

Questions about move or re-mount a dish

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
Can I move my Starlink dish myself?

On the ground, yes. Moving a kickstand dish to a clearer spot is easy, and the app's obstruction check helps you choose. Roof work, fixing into structure and sealing roof penetrations are where DIY installs usually go wrong, and that's what we're called in for.

Do I need to tell Starlink when I move house?

Yes. Residential plans are tied to a service address, so update it in your Starlink account and check the new address has coverage. Capacity varies between areas, so do it before moving day rather than after the boxes are unpacked.

Will moving the dish fix my dropouts?

If the outage history shows obstructions and the map shows red where trees or the roof sit, usually yes. If the outages aren't down to obstructions, moving the dish won't help, and the cause is more likely the cable, the router, power or Starlink's network. We check which before we quote a move.

What happens to the old holes in my roof?

We seal them. On metal roofs, old screw holes in the crest get a new roofing screw with a sealing washer, or a neutral-cure sealant suited to the roof sheet. Wall entries are filled and sealed. If an earlier install cracked tiles, we tell you, and whether it needs a roofer.

My cable won't reach the new spot. Can you extend it?

We don't cut and join Starlink cables. Instead, we move the router closer or fit a longer Starlink cable where one is made for your kit. For long distances, the router sits near the dish and network cable, fibre or a wireless link carries the connection the rest of the way.

Can you remove the dish before reroofing or solar panels go on?

Yes. We take it down before the trades arrive and refit it afterwards, often in a better spot now the roof layout has changed. Solar panels want the north-facing roof, so we plan the dish around them rather than competing for space.

Do you fix installs done by someone else?

Yes, often. Loose gutter mounts, cables through windows and leaking entries are common. We reuse what's sound, replace what isn't and tell you which is which before we start.

I'm selling. Should the Starlink stay?

Either works. If the kit goes with you, we remove it and seal the penetrations so they don't turn up in a building inspection. If it stays, you remove it from your Starlink account and the buyer activates it on a plan of their own.

Do you work on older dishes?

Yes. The original round dish, the motorised rectangular dish and the current Standard and Mini kits all use different mounts and cables, so tell us which one you have when you book. We'll bring the right hardware, or tell you if moving to a newer kit makes more sense.

Get a mount plan and a fixed quote

Tell us about the property. We plan the mount, the cable run and the Wi-Fi so it works in every room and every season.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Very quick. Very efficient. Excellent value for money.”
Keith J., Google review

Get a Starlink install quote

Tell us about the property. We’ll check the site and quote the mount and cable run.

Starlink quoteTB-·····

Property type
Do you have a kit?

What happens next

  1. We call you back, 9 am to 8 pm, 7 days.
  2. We talk through the roof, trees and cable run, then confirm the mount and a price.
  3. We book the visit. Nothing is ordered until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online