CCTV repair and upgrades in Canberra, reusing what still works
Cameras showing 'No video', a recorder that quietly stopped saving footage months ago, or an old analogue system nobody can log into any more. We find the fault, fix what's worth fixing and upgrade the rest, reusing cable and mounting points that are still sound. You get a clear quote before any parts are ordered.
Call 1300 224 027 or send a request. A photo of the recorder's label and any error on screen helps us bring the right parts.
We find the fault
We test power, cables, cameras, the recorder and the app in order, and export any footage you need before changing settings.
Repair now or quote the upgrade
Small fixes are done on the spot. For drives, cameras or a new recorder, you get a quote before anything is ordered.
Test and hand over
Every camera is checked day and night, the clock is set, and the app works on each phone before we leave.
Inside a security camera
What separates a good camera from a cheap one.
Lens and sensorResolution and low-light performance live here.Drawn in red: where we focus first
Infrared ringNight vision, and why spider webs matter.
HousingWeather-rated for Canberra frosts and summer sun.
Network cablePower and video on one wire with PoE.
Where CCTV systems usually fail
An analogue bullet camera from an old system beside the dome camera replacing it on the same cable run.
A camera system is a chain of power, cable, camera, recorder, network and app, and the symptom usually tells you which link failed.
Possums and rats. They nest in roof spaces and chew cable, especially in suburbs backing onto nature reserves.
Heat. Plug packs and recorders in roof voids or west-facing garages cook through January heatwaves, finishing off hard drives and power supplies.
Frost and storms. Frosty nights then sunny mornings draw moisture into cheap housings; storms find any joint wrapped only in tape.
Spiders. A web under the camera hood catches the infrared at night and turns every breeze into a motion alert.
What a TechBox CCTV repair includes
Most CCTV callouts are one failed link in a chain. Finding the right link is what saves you money.
Fault-finding in order
Power, cable, camera, switch, recorder, then the app. Each link is tested so you only pay for the part that's failed.
Your cabling tested
Coax and network runs are tested end to end, and corroded or taped-up joints at the camera or in the roof are re-made.
Drive health checked
We read the drive's health and the recording log, so you know whether footage has been saving and how many days you keep.
Correct time, kept
Time zone, daylight saving and network time set, so every clip carries a time stamp police and insurers can rely on.
Firmware brought up to date
Recorder and cameras updated where the maker still publishes firmware, and every default password changed.
Reuse before replace
Mounts, cable and cameras that still perform stay put. We replace what's failed or what's holding the whole system back.
No open ports
Remote viewing runs through the maker's secure service, port forwards are closed and UPnP is switched off on the recorder.
App on every phone
Each person gets their own login, with alerts tuned for people and cars rather than every moth at the porch light.
Analogue, HD over coax or IP: what you have now
Before: recorder, power boards and tangled cable on the floor of a cupboard with no airflow.
The plugs and label on the back of the recorder tell you what you have, and that decides the upgrade.
Plugs
Cable
Recorder label
Round, twist-on BNC
Coaxial: analogue or HD over coax
DVR
Square network plugs
Network cable to IP cameras
NVR
Both
Either
XVR, a hybrid
Systems from the early 2010s and before are often true analogue, under one megapixel: faces smudge beyond a few metres. Later coax formats AHD, HD-TVI and HD-CVI push 2 MP to 8 MP down the same cable; camera and recorder must match, though most recent hybrids handle all three.
Coax that tests clean
New HD cameras and a hybrid recorder go onto the existing cable, with no new holes in walls or ceilings.
Thin, chewed or waterlogged cable
DIY-kit cable or damaged runs usually mean network cable to new PoE cameras. Our home CCTV buyer’s guide covers resolution and night vision.
What's wrong with my CCTV?
The symptom usually points to the failed link. Here's how we read them on site.
What you noticeLikely causeThe fix
What you noticeOne camera 'No video', the rest fineLikely causeThat camera's cable, joint or power supplyThe fixTest the run, re-make joints, then try a known-good camera
What you noticeSeveral cameras drop out at onceLikely causeShared power box, PoE switch or recorder portsThe fixTest the shared power source first, then the ports
What you noticeCameras missing after a new modemLikely causeRecorder or cameras on fixed addresses from the old routerThe fixRe-address them, or let the recorder manage the cameras
What you noticeRecorder beeping, 'HDD error' or no playbackLikely causeFailed, full or unformatted hard driveThe fixExport footage, then fit a surveillance-rated drive
What you noticeNight picture black, white or foggyLikely causeDead infrared LEDs, cobwebs, fog or eave reflectionThe fixClean, reseal and re-aim, or replace the camera
What you noticePink or purple picture by dayLikely causeStuck infrared-cut filter inside the cameraThe fixReplace the camera, matched to your recorder
What you noticeClips an hour or more outLikely causeNo network time, daylight saving offThe fixSet time zone, network time and daylight saving
What you noticeApp says 'device offline' away from homeLikely causeRecorder lost internet, or the cloud service was retiredThe fixReconnect and update, or move to a supported recorder
Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.
The recorder and its hard drive
After: the recorder on a ventilated shelf with a new surveillance drive and a labelled switch.
The commonest fault is the quietest: a recorder that stopped recording months ago. Live view still works, the buzzer gets silenced, and nobody notices until they need footage.
Surveillance-rated drives such as WD Purple or Seagate SkyHawk, built for continuous writing
Recording schedule, overwrite setting and days kept checked
H.265 instead of H.264 where cameras support it, stretching the same drive
The recorder moved out of airless cupboards and off the modem
A small UPS to ride through summer-storm power cuts
Upgrade paths for an older analogue system
Three honest routes from a grainy old system to footage you can use. The right one depends mostly on the state of your cable.
Swipe to compare
Repair and keep
Our pickHD cameras on existing coax
Full IP (PoE) upgrade
Picture quality
Low, often under 1 MP
2 MP to 4K
4 MP to 4K, best low-light models
Reuses existing cable
Partial
One cable for power and video
Partial
Person and vehicle alerts
Partial
Mix camera brands later
Partial
Partial
Installation work
Minimal
Cameras and recorder only
New cable runs in most homes
Relative cost
Lowest
Mid
Highest
Best for
A system that mostly works
Sound coax and hard-to-cable homes
Best detail and alerts long term
We test the coax before recommending the middle route. Thin pre-made leads from DIY kits, or chewed and waterlogged runs, usually point to new network cable instead.
Firmware, passwords and recorders past their use-by date
A recorder is a small computer on your home network. In 2016 the Mirai botnet took over hundreds of thousands of devices, many of them cameras and recorders, using factory default passwords.
Several major camera makers have since patched older-firmware flaws that let attackers in with no password at all. A recorder set up with port forwarding may have been reachable from the internet for years.
Update firmware. On the recorder and cameras, where the maker still publishes it.
Change every default password. Then give each person their own login.
Set up safe remote viewing.Remote viewing without port forwarding.
Replace if it’s past it. No updates, or a web page needing an old Internet Explorer plugin? Replace the recorder; cameras can often stay.
Systems we work on
We're independent of every camera maker, so we work on most systems, old and new. A photo of the recorder's label tells us exactly what you have.
Recorders
NVR (network video recorder)
PoE NVR with built-in switch
DVR (analogue)
Hybrid DVR or XVR
Cloud recording, no recorder
Camera signal types
Analogue (CVBS, 960H)
AHD
HD-TVI
HD-CVI
IP (ONVIF)
Wi-Fi and battery cameras
Camera styles
Bullet
Turret
Dome
PTZ
Fisheye
Floodlight cameras
Video doorbells
Common brands
Hikvision
Dahua
Swann
Uniview
Reolink
Ubiquiti UniFi Protect
Eufy
Arlo
Ring
Google Nest
What affects the price
Most jobs become a health check, a recorder refresh or an analogue-to-HD upgrade. The fault-finding visit tells us which, at $189 for the first hour, then 30-minute blocks.
How many cameras change
And whether positions are right: cameras at the top of a two-storey wall see hats, not faces, so we may suggest moving them lower.
Cable access
Single-storey brick with roof space is quick; double-storey, flat roofs and tight newer Gungahlin and Molonglo roof spaces take longer.
Coax reuse and storage
Clean coax saves a lot of labour; chewed or waterlogged runs are replaced. A bigger drive costs more upfront and keeps footage longer.
Anything beyond the visit is quoted before parts are ordered, and we’ll say when a repair isn’t worth it.
Repair it or replace it?
Part by part, this is the call we make on site.
Swipe to compare
Usually repair if
Usually replace if
Camera
Dirty dome, loose joint or water in the plug
Dead infrared, stuck filter or fog inside the lens
Recorder
Still gets firmware and supports your cameras
No updates for years, or needs an old browser plugin
Hard drive
Healthy but full, so settings need adjusting
Bad sectors, clicking or an 'HDD error'
Cabling
Tests clean end to end
Chewed, waterlogged, kinked or crushed
Power supply
Loose plug or a tripped circuit
Failed plug pack, power box or PoE switch
App
The maker still supports it
Retired or pulled from the app stores
Homes, businesses and next steps
Businesses usually need insurer-minded retention, cameras on their own network segment and manager access levels.
These take ten minutes from the ground and often narrow the fault down.
Stop and call us if: Stop before climbing to second-storey height or onto a roof, opening a power box, or initialising a drive that may hold footage you need. Call us instead.
Real Google reviews. We ask every customer, every time.
Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.
ruth d., Google review
Excellent professional service- very prompt home visit, quick diagnosis of my computer problem and then it was fixed and returned to my house next day. I will certainly use this company again.
ironbark v., Google review
Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.
Yes, in most cases. We're not tied to any brand, so we work on systems from DIY kits through to installer-grade recorders. We need the admin password or a way to reset it, and we'll tell you before any step that could affect stored footage.
Can I keep my old cameras and just replace the recorder?
Often, yes. Analogue and HD-over-coax cameras need a DVR or hybrid recorder that supports their signal type, and IP cameras need a recorder that supports ONVIF or the same brand. We check each camera's format before recommending a recorder, so nothing is left without a home.
Can new HD cameras use my existing coax cable?
If the coax tests clean, usually yes. HD-over-coax formats such as AHD, HD-TVI and HD-CVI comfortably cover the cable runs in a typical home. Where you want network cameras but can't run new cable, Ethernet-over-coax adaptors can carry the network signal, and on some models power, over the old run.
I've forgotten the recorder password. Can you get in?
Usually. Most makers have a reset process, sometimes using a security question, an email or a code from the maker matched to the serial number. Some resets need proof of ownership. We check what a reset does on your model before we start, so you don't lose footage you need.
How long does a recorder hard drive last?
It depends on the drive and how hard it works. Surveillance-rated drives are built for continuous writing and commonly run for several years, while ordinary desktop drives tend to fail sooner under round-the-clock recording. Heat shortens both, which is why we check where the recorder lives.
Why did my cameras go offline when I changed internet provider?
The new modem usually hands out a different address range, so cameras set to fixed addresses on the old range can't reach the recorder, and the recorder may still point at the old router. Wi-Fi cameras also drop off if the network name or password changed. It's normally a settings fix, not new hardware.
Is it worth upgrading from analogue cameras?
If you've ever looked for a face or a car in your footage and found a smudge, yes. Modern 4 MP cameras show far more detail and much better night footage, and they add person and vehicle alerts. If your system records reliably and you only need a general view, a health check may be all it needs.
Can you get footage off my recorder for the police?
Yes. We export the clip to a USB stick, note any difference between the recorder's clock and the real time, and keep the original file format as well as an easy-to-play copy. Police may ask for the original, so don't delete it from the recorder.
Are older recorders a security risk?
Some are. Recorders sold years ago often shipped with default passwords, and several makers have since patched serious flaws in older firmware. If yours no longer gets updates, we'll keep it off the open internet or recommend a replacement, and the cameras can usually stay.