Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

iPhone charging port repair in Canberra, starting with a proper clean

The cable won't click in, it charges only at an angle, or a 'Liquid detected' alert won't clear on a dry phone. We repair Lightning and USB-C iPhone ports at our Mitchell workshop, and we always clean and test the port first, because packed pocket lint is often the whole problem.

“Very personable and professional attention to the problem. Would use again.”
Paula K., Google review
  • Open 7 days, 9 am to 8 pm
  • 90-day warranty
  • Quote before work
  • Port cleaned and tested before any part is quoted
  • Lightning and USB-C models, iPhone 8 onwards
  • Bottom microphones tested along with charging
  • 90-day warranty on parts and labour
Close-up of a smartphone's bottom charging port packed with grey pocket lint, with a wooden toothpick and an anti-static brush beside it
Charging port
Confirmed before we start
Turnaround
Same day to 2 days
Where
Mitchell workshop
Warranty
90 days, parts and labour

Rather we call you?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.

We only use your number to call you about this.

usual for a port clean, which is often the whole fix
Same day
iPhone generations, Lightning and USB-C, newer on request
8 to 16
warranty on the port and our labour
90 days
open, with calls answered until 8 pm
7 days

Charging faults we fix

  • Charges only at an angle

    Lint holding the plug out of the port, or contacts that have worn. Cleaning comes first, and a new port only if it's needed.

  • The cable won't click in

    A plug that stops a few millimetres short is almost always sitting on compacted lint at the bottom of the port.

  • A loose USB-C cable

    Either lint around the port's centre tongue or a worn cable. We test with known-good cables to tell which.

  • 'This accessory may not be supported'

    Common with Lightning cables that lack Apple's Made for iPhone chip, and with dirty or damaged port contacts.

  • 'Liquid detected' won't clear

    Moisture trapped in the port, or corrosion left behind after it dried. Corroded pins need cleaning or a new port.

  • Slow charging or stuck at 80%

    Sometimes a weak adapter or a charging setting rather than the port. We check those before quoting a part.

  • Computer or car won't recognise it

    Charging works but data doesn't, which points to damaged data contacts in the port or a faulty cable.

  • Callers say you sound muffled

    On most models the bottom microphones sit on the same flex as the port, so liquid or damage there affects both.

Pick the job. We confirm a fixed price for your exact model before any work starts.

What happens next

  1. Tell us what it's doing

    Call 1300 224 027 or send a repair ticket with your model and what happens when you plug it in. Bring the cable and charger you normally use.

  2. Clean and test first

    We inspect the port under magnification, clear any lint and test with known-good cables, wired and wireless.

  3. Quote the real fix

    If cleaning solves it, that's the job. If the port is worn or corroded, or the fault is deeper, you get a fixed quote before any work starts.

  4. Replace and test

    A new port assembly is fitted and sealed, then fast charging, data, microphones and wireless charging are tested before we call you.

Before and after

Drag the handle to compare. The same kind of job, photographed on the bench before and after.

After: charging port, clearedBeforeAfter
Charging port, cleared Packed lint out, contacts clean, charging again.
Exploded technical drawing: what’s really in your charging port

What’s really in your charging port

Most “broken” ports are full of lint.

  • Packed lintStops the plug seating. Cleaned out safely, no metal tools.Drawn in red: the part we replace most
  • Contact pinsBent or corroded pins mean a new port.
  • Charging chipIf the port is fine, the fault is on the board.

Lint, a worn port or the board

A port packed with pocket lint. Compacted fluff like this stops the plug seating, and cleaning it is often the whole repair.
A port packed with pocket lint. Compacted fluff like this stops the plug seating, and cleaning it is often the whole repair.

“Won’t charge” has three common causes, and they cost very different amounts to fix. We find out which one it is before quoting.

  • Lint. Each time the cable goes in, it presses pocket fluff into a felt pad that stops the plug seating. It charges only at an angle, then not at all. Cleaning fixes it.
  • A worn or damaged port. Contacts lose their spring after years, get bent by sideways force or corrode after liquid. Then the port assembly is replaced.
  • Battery or board. A failed or long-flat battery, or the board’s charging circuit. On older Lightning iPhones the port chip (Hydra or Tristar) is a known weak point after cheap chargers and spills.

Our guide to fixing a phone that won’t charge walks through the other checks.

What you get with every port repair

A charging port does more than charge. We test everything that runs through it before you collect the phone.

  • Lint ruled out first

    The port is inspected under magnification and cleaned before we decide anything needs replacing.

  • Wired and wireless tested

    Testing both tells us whether the fault is the port, the battery or the board, so you only pay for the real fix.

  • Fast charging confirmed

    We check the phone negotiates fast charging on a USB-C Power Delivery adapter, not just that it trickles.

  • Microphones tested too

    The port flex carries the bottom microphones on most models, so we test calls and voice recording afterwards.

  • Data checked

    We connect it to a computer to confirm the data contacts work, for backups, transfers and wired CarPlay.

  • 90-day warranty

    Parts and labour are covered. If the new port develops a fault, we make it right.

Lightning and USB-C wear differently

Port contacts are checked under magnification for wear, bending and corrosion before anything is replaced.
Port contacts are checked under magnification for wear, bending and corrosion before anything is replaced.

The springy contacts sit in a different place on each connector, so they fail in different ways.

  • Lightning

    The plug is a solid blade and the springs sit inside the phone. Every insertion wears the phone’s side, so the port eventually loses its grip even when spotless.

  • USB-C port

    A thin tongue with flat contacts each side, springs in the cable. It tolerates years of plugging in, but lint packs around the tongue and sideways force bends it.

  • USB-C cable

    Its springs do the gripping, so cables wear out too. Loose in every device? Replace the cable. Loose only in the phone? It’s the port.

Charging in bed with the cable bent against the mattress, or a cable left in while the phone sits in a car cradle, are typical ways a tongue gets damaged. A bent or cracked tongue can’t be cleaned back to health, so the port is replaced.

Why won't my iPhone charge?

What the phone does when you plug it in usually points to the cause. Here's how we read it.

What you noticeLikely causeThe fix
What you noticeCharges only at an angleLikely causeLint packed in, or worn contactsThe fixClean first. Port replacement if the contacts are worn.
What you noticePlug stops short of clicking inLikely causeLint compacted at the bottom of the portThe fixPort clean, usually the whole fix
What you notice'This accessory may not be supported'Likely causeNon-MFi Lightning cable or dirty contactsThe fixTry an Apple cable, then clean the port
What you notice'Liquid detected' on a dry phoneLikely causeTrapped moisture or corroded pinsThe fixDry it out. Clean or replace if corroded.
What you noticeWireless charges, clean port never doesLikely causeFailed port or port flexThe fixCharging port replacement
What you noticeNothing charges, wired or wirelessLikely causeDead battery or a board charging faultThe fixKnown-good battery test, then a quote
What you noticeCharges, but computer won't see itLikely causeDamaged data contacts or cableThe fixCable swap, then port test
What you noticeCharging trouble and muffled callsLikely causePort flex with the microphones damagedThe fixPort assembly replacement fixes both

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Liquid alerts and corrosion

From the iPhone XS and XR on, the phone checks its port for moisture, shows a ‘Liquid detected’ alert and stops wired charging until it’s dry.

Here’s Apple’s advice.

  1. Unplug. Take the cable out and stop trying to charge by wire.
  2. Tap it out. Tap the phone gently against your hand with the port facing down.
  3. Let it air. Leave it somewhere dry with some airflow for at least 30 minutes, and up to a day if the alert persists.

An alert that keeps returning on a dry phone usually means corrosion. Corroded pins can sometimes be cleaned; pitted ones mean a new port. If the phone went right under, see water damage repair and our phone water damage first aid guide.

Lightning and USB-C iPhone ports compared

Apple changed connectors with the iPhone 15. The two ports fail in different ways.

Swipe to compare

LightningUSB-C
ModelsiPhone 8 to 14, SE (2nd and 3rd gen)iPhone 15 and later, 16e, 17e
Where the springs areInside the phone's portIn the cable's plug
Usual wear pointPort contacts lose their springLint around the centre tongue, or a bent tongue
Lint symptomWon't click in, charges at an anglePlug feels loose or won't seat
Cable warningsNon-MFi cables can trigger 'not supported'Rare. Cheap cables just charge slowly.
Fast chargingUSB-C to Lightning cable, 20 W+ adapterUSB-C cable, 20 W+ PD adapter
Data speedUSB 2USB 2, or USB 3 on Pro models with a USB 3 cable
Wireless fallbackQi; MagSafe on 12 to 14, not SEMagSafe; the 16e is Qi only

A USB-C cable that feels loose in every device is a worn cable. One that's loose only in your phone points to the port.

Wireless charging as a stopgap

Corrosion on a phone board after liquid. The same crust on port pins keeps a liquid alert coming back.
Corrosion on a phone board after liquid. The same crust on port pins keeps a liquid alert coming back.

A dead port rarely leaves you stranded: put the phone on a pad and carry on. Expect it to be slower.

Charging Which iPhones Speed
Basic Qi pad iPhone 8 and later Up to 7.5 W, so a flat battery takes hours
MagSafe iPhone 12 and later, except SE models and iPhone 16e Quicker, if lined up and without a thick case
20 W wired charger Any, with a working port About half an hour to 50%

Heat ages a battery faster than anything, so take the case off if the phone gets hot on the pad, and don’t charge it on the dashboard in a Canberra January. A pad also can’t fix muffled calls: on most models the bottom microphones share the port’s flex cable.

iPhone models we repair ports on

Port assemblies for the most common models are usually in stock. For newer models we confirm availability when you book.

USB-C: iPhone 16 family

  • iPhone 16e
  • iPhone 16
  • iPhone 16 Plus
  • iPhone 16 Pro
  • iPhone 16 Pro Max

USB-C: iPhone 15 family

  • iPhone 15
  • iPhone 15 Plus
  • iPhone 15 Pro
  • iPhone 15 Pro Max

Lightning: iPhone 14 family

  • iPhone 14
  • iPhone 14 Plus
  • iPhone 14 Pro
  • iPhone 14 Pro Max

Lightning: iPhone 13 family

  • iPhone 13 mini
  • iPhone 13
  • iPhone 13 Pro
  • iPhone 13 Pro Max

Lightning: iPhone 12 family

  • iPhone 12 mini
  • iPhone 12
  • iPhone 12 Pro
  • iPhone 12 Pro Max

Lightning: iPhone 11 family

  • iPhone 11
  • iPhone 11 Pro
  • iPhone 11 Pro Max

Lightning: older models

  • iPhone X
  • iPhone XS
  • iPhone XS Max
  • iPhone XR
  • iPhone 8
  • iPhone 8 Plus
  • iPhone SE (2nd gen)
  • iPhone SE (3rd gen)

Newest models

  • iPhone 17 family and iPhone Air: ask us about parts
  • iPhone 17e: ask us about parts
  • iPhone 18 Pro and 18 Pro Max: ask us about parts

What a port replacement involves

An iPhone port isn’t a socket soldered to the board. It’s a flex cable assembly that plugs into the logic board and usually carries the bottom microphones too.

We open the phone, disconnect the battery and remove whatever sits in the way, from the loudspeaker and Taptic Engine to the back panel on newer designs. Once it’s sealed, we test every job the port does:

  • Fast charging on a USB-C Power Delivery adapter
  • Data on a computer
  • Both microphones, with a call and a voice memo
  • Wireless charging

Clean, replace or look deeper?

Three outcomes from the same complaint, with very different costs. We work out which before quoting.

Swipe to compare

Our pickPort cleanPort replacementBattery or board fault
Typical causeCompacted pocket lintWorn, bent or corroded contactsFlat or failed battery, charging circuit
Wireless chargingUsually worksUsually worksOften doesn't
Usual turnaroundUsually same daySame day to 2 daysQuoted after bench testing
CostLowestMidVaries, quoted first
Bottom microphonesUnaffectedRenewed with the port flex on most modelsUnaffected
Data on the phoneUntouchedUntouchedUsually untouched

Wireless charging is the quickest clue. If it works, the battery and board are probably fine and the port is the place to look.

When it isn't the port

If a clean port still won’t charge, we test with a known-good battery before going further.

If the fault is on the logic board, we explain the options and whether the repair is worth it on your model before you spend anything.

Try this first

Plenty of 'broken' ports come good with one of these. All of them are safe to try at home.

Stop and call us if: Stop if the lint won't move with gentle pressure, the pins look green or white, the port is wet, or the phone gets hot when plugged in. Digging harder is how ports get damaged.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.

Steve P., Google review

Tech Box saved the day!!!!!!!!!!! With my laptop on the brink of despair, I turned to Tech Box for help, and they delivered beyond expectations. Their expert team swiftly diagnosed and resolved the issue, displaying a level of professionalism that's truly commendable.

Gihani W., Google review

Very personable and professional attention to the problem. Would use again.

Paula K., Google review

Questions about iPhone charging port

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
Can you just clean my charging port?

Often, yes. Each time a cable goes in, it presses a little pocket lint into the bottom of the port, until the plug can't seat properly. We clear it under magnification with non-metal tools and test it. If that fixes it, you don't need a new port.

How long does a charging port replacement take?

Same day to two days, depending on the model and whether the part is in stock. On some newer models the screen or back has to come off to reach the port, which adds time. We tell you when we quote.

Why does my iPhone say liquid detected when it's dry?

Moisture can sit inside the port after the outside is dry, especially after rain or a steamy bathroom. If the alert keeps coming back for days, the pins may be corroded, which shows as a green or white crust. That needs cleaning or a new port.

Is it safe to use Emergency Override?

Only in a genuine emergency. Charging with liquid in the port can corrode the pins and the cable. Charge wirelessly instead if you can: Apple says a wireless charger is fine to use as long as the back of the phone is dry.

Can I just use wireless charging instead?

For a while, yes, on iPhone 8 and later. You lose wired CarPlay, charging from a car's USB port and cable backups, though. A failing port usually gets worse, so it's better fixed on your schedule than on the morning you need it.

Why does my iPhone charge slowly with a new cable?

Check the adapter first: fast charging needs a USB-C Power Delivery adapter of 20 W or more. Then check the charging settings in Settings > Battery, because Optimised Battery Charging, or a Charge Limit on iPhone 15 and later, deliberately holds the battery at 80%. If both are fine, we'll test the port and battery.

Is it the cable or the phone?

A cheap or damaged cable is more often the culprit than the port. Lightning cables without Apple's Made for iPhone chip can trigger 'This accessory may not be supported' and charge on and off. Try an Apple cable in a different adapter before booking a repair.

Will I lose my photos or data?

No. A charging port repair doesn't touch your phone's storage. If the phone still turns on, back it up to iCloud first anyway, as you would before any repair.

Get it booked in today

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online