Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

Wi-Fi and mesh installation for Canberra homes

Bedrooms with one bar, a granny flat that can't get a signal, a smart TV that buffers every evening. We design and install mesh Wi-Fi and wired access points for Canberra homes, from double-brick houses in the inner north to split levels on sloping blocks and new builds in Gungahlin. We measure first, then place every node for your floor plan.

“Very personable and professional attention to the problem. Would use again.”
Paula K., Google review
  • Open 7 days, 9 am to 8 pm
  • Quote before work
  • Coverage measured room by room, before and after
  • Wired backhaul wherever there's a path for cable
  • Double brick, split levels and granny flats
  • Separate networks for guests and smart devices
  • Open 7 days, calls until 8 pm
A small white mesh Wi-Fi node on a timber bookshelf in a lamp-lit living room, with a sofa, a closed laptop on the coffee table and Black Mountain Tower through the window at dusk
Mesh install
Confirmed before we start
Turnaround
Usually a single visit
Where
On-site across Canberra and nearby NSW

Rather we call you?

Leave your number. We call back 9 am to 8 pm, 7 days, to talk through what you want covered.

We only use your number to call you about this.

for most homes: measure, install and test every room
1 visit
what most Canberra homes need, depending on the walls
2 to 4 nodes
signal measured in each room, so you see the difference
Before and after
visits, with calls answered until 8 pm
7 days

Wi-Fi and mesh options

Go straight to the job you need. Each page has the detail, the options and the price guide.

Coverage problems we design around

  • Dead spots in bedrooms and the study

    Rooms at the far end of the house, or upstairs, where the signal drops to one bar or disappears.

  • A router stuck in the garage

    The NBN connection box was installed in the garage or at one end of the house, so the Wi-Fi starts in the wrong place.

  • Double brick and older homes

    Solid brick and thick plaster soak up Wi-Fi. These homes almost always need more than one access point, ideally wired.

  • Split levels and two storeys

    Concrete slabs and half-flights of stairs block signal between levels, so nodes need placing level by level.

  • Granny flats, studios and garages

    Detached buildings get Wi-Fi through a mesh node, a buried cable or a short wireless link, depending on the distance.

  • Outdoor areas

    Low-E glass and brick walls stop Wi-Fi reaching the deck, the pool or the backyard. An outdoor-rated access point covers them properly.

  • Smart TVs and gaming consoles that buffer

    Streaming and gaming want a steady connection. We wire them where we can and give them a strong signal where we can't.

  • Smart-home devices that won't connect

    Many plugs, cameras and appliances only use 2.4 GHz and get confused by combined networks. We give them a network they can join.

  • Extenders that made things worse

    Cheap extenders often halve the speed and add a second network to juggle. Mesh or wired access points replace them.

Pick the job. We confirm a fixed price for your exact model before any work starts.

  • Mesh Wi-Fi installation

    Nodes placed room by room, with wired backhaul where there's a path

    Turnaround
    Usually a single visit
    Price
    Priced for your model
  • Router setup and security

    One router placed well and locked down, for units and smaller homes

    Turnaround
    Often within the first hour
    Price
    $189 first hour
  • On-site visit for assessment or extra work

    Signal mapped, the cause found and options explained on the spot

    Turnaround
    Then billed in 30-minute blocks
    Price
    $189 first hour
  • Smart home setup on the new network

    Plugs, cameras and doorbells moved onto their own network

    Turnaround
    Quoted with the Wi-Fi
    Price
    Priced for your model

What happens next

  1. Tell us about the house

    Call 1300 224 027 or use the form. Tell us the size and age of the house, where the NBN box is, which rooms are a problem and what devices you use.

  2. Measure and design

    We test the speed arriving at the NBN connection, map the signal through the house, and choose where each node or access point goes and how they connect.

  3. Install and configure

    We install the hardware, connect wired backhaul where there's a path for it, and set up your main, guest and smart-home networks.

  4. Test every room

    We test in each room and outdoor area, move your devices across, and show you how to manage the system from its app.

Before and after

Drag the handle to compare. The same kind of job, photographed on the bench before and after.

After: under-desk cables, tidiedBeforeAfter
Under-desk cables, tidied Cables run, tied and off the floor.
Exploded technical drawing: wi-fi in every room

Wi-Fi in every room

Where mesh nodes go in a typical Canberra home.

  • RouterMoved out of the cupboard where possible.
  • Mesh nodesOne per floor or zone, ideally wired back.Drawn in red: where we focus first
  • Brick and foilThe walls that block signal in older homes.
  • Outdoor reachGranny flats, studios and the backyard.

Whole-home Wi-Fi, and where to start

Most Wi-Fi problems come from distance, walls and where the router ended up, not the NBN plan. The fix is usually more than one access point, placed for your floor plan.

Not a mesh job?

What a TechBox Wi-Fi install includes

Two nodes from a shop box can still leave the back bedroom dead. The difference is measuring, placing and connecting them properly.

  • The connection tested first

    A wired speed test at the NBN box, so we know what the Wi-Fi has to deliver and whether the plan is the real limit.

  • Measured, not guessed

    Signal and speed checked room by room, before and after, including the far bedroom and the deck.

  • Wired backhaul where possible

    Existing data points and patch panels put to use, so each node gets the full connection.

  • One router, no double NAT

    The provider's modem bridged, or the mesh in access point mode, so only one device does the routing.

  • Three networks

    Main, guest and a 2.4 GHz smart-home network, so plugs and cameras join and stay apart from your laptops.

  • Secured from day one

    WPA3 where your devices support it, current firmware, automatic updates and the admin password changed.

  • Outbuildings covered

    Granny flats, studios and garages linked by mesh, buried cable or a short point-to-point link.

  • TVs and consoles cabled

    The lounge and the gaming desk plugged into the nearest node wherever a short cable will do it.

  • Shown how to run it

    Pausing the internet, adding a guest and checking for updates, shown on your phone before we leave.

Canberra homes and what stops Wi-Fi

The usual starting point in newer homes: the NBN box on the garage wall, at the wrong end of the house.
The usual starting point in newer homes: the NBN box on the garage wall, at the wrong end of the house.

Each local building style blocks Wi-Fi differently, so your walls usually decide what you need.

  • Double brick

    Solid brick and thick plaster in the inner north and south soak up signal. Plan on an access point per wing, ideally wired, as wireless backhaul struggles through the same walls.

  • Brick veneer and new builds

    Veneer homes from the 1960s onwards are kinder inside, but foil blocks signal to the garage. Gungahlin and Molonglo builds add foil-faced insulation and Low-E glazing that keep Wi-Fi off the deck.

  • Split levels

    Common on sloping blocks in suburbs built through the 1970s. A concrete slab blocks far more than timber, and the stairwell is often the only path, so we stagger nodes level by level.

  • Granny flats and studios

    A fibro studio across a lawn is easier than a brick flat behind the garage. Beyond wireless, cable in conduit runs up to 100 metres, or point-to-point radios need clear line of sight.

What's limiting my Wi-Fi?

A speed test with a cable at the router, then one on Wi-Fi in the problem room, usually tells you which of these it is.

What you noticeLikely causeThe fix
What you noticeFull bars near the router, one bar in back bedroomsLikely causeDistance and internal brick wallsThe fixA second node, wired back where possible
What you noticeSlow at the router even with a cableLikely causeThe NBN line or the plan is the limitThe fixNot a Wi-Fi job: check the line or the plan
What you noticeFast on cable, slow on Wi-Fi everywhereLikely causeOld Wi-Fi 4 or 5 router, or crowded channelsThe fixA Wi-Fi 6 or newer system with channels set properly
What you noticeSignal fine upstairs, but slowLikely causeWireless backhaul through a concrete slabThe fixWired backhaul via the stairwell or existing data points
What you noticeSpeed halves near the extenderLikely causeDual-band extender repeating on the same radioThe fixTri-band mesh or a wired access point instead
What you noticeSmart plug or camera won't joinLikely cause2.4 GHz-only device on a combined networkThe fixA separate 2.4 GHz smart-home network
What you noticeDrops out on the deck and by the poolLikely causeLow-E glass and brick block the signalThe fixAn outdoor-rated access point
What you noticeConsole reports Strict NAT or Double NATLikely causeTwo routers in a rowThe fixBridge mode on the modem, or access point mode on the mesh

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Mesh, wired access points and backhaul

Mesh nodes work as one network and suit most homes. Wired access points, often on the ceiling and powered over the cable (Power over Ethernet), are most consistent in large, double-brick or cabled homes.

Either way, backhaul (how each node talks back to the router) decides how well the whole system performs.

Backhaul How it performs
Wired The gold standard; data points run during construction can often be used
Dedicated wireless radio Tri-band or quad-band keeps the node link off your devices’ radios
Shared wireless Dual-band loses speed at every hop: fine in a small home, frustrating in a large one
Powerline adapters Good in some homes, poor in others, especially across circuits, so we test first

Extender, mesh or wired access points?

All three spread Wi-Fi further. They're not equal, and the walls in your house usually decide.

Swipe to compare

Wi-Fi extenderOur pickMesh systemWired access points
One network name as you move aroundPartial
Full speed at the far endYes, with wired backhaul
Gets through double brickPartial
Works without new cabling
Managed from one appPartial
Easy to add to laterPartial
Upfront costLowestMidMid to high
Best forOne weak room in a small homeMost family homesDouble brick, large homes and homes already cabled

Many homes end up with a mix: mesh nodes with wired backhaul where there's a cable path, and wireless backhaul where there isn't.

Choosing the hardware

How we plan a two-storey brick home: one node per level, each with a clear path to the next.
How we plan a two-storey brick home: one node per level, each with a clear path to the next.

Whatever the brand, a new system should tick these boxes.

  • Wi-Fi 6 or newer, and tri-band if backhaul is wireless
  • Network ports on every node for backhaul, a TV or a desktop
  • Automatic firmware updates, because a router that never updates becomes a security risk
  • WPA3, guest and 2.4 GHz smart-home networks, managed in the app
  • Room to add a node later without replacing it

Systems we install and work with

If you already own one of these, we'll tell you whether it's up to the job before suggesting anything new.

Mesh systems

  • TP-Link Deco
  • Netgear Orbi
  • eero
  • Google Nest Wifi Pro
  • ASUS ZenWiFi
  • Linksys Velop

Ceiling and wall access points

  • Ubiquiti UniFi
  • TP-Link Omada

Outdoor coverage

  • Outdoor-rated UniFi and Omada access points
  • Weatherproof mesh nodes where the maker offers one

Links to outbuildings

  • Point-to-point wireless bridges
  • Buried or conduit network cable
  • Powerline adapters, tested first

Starlink homes

  • Starlink mesh nodes
  • Your own mesh with the Starlink router in bypass mode

Wi-Fi 6, 6E and 7 in plain terms

Where the house has a patch panel, existing data points carry the backhaul between nodes.
Where the house has a patch panel, existing data points carry the backhaul between nodes.

Wi-Fi 6 is the sensible baseline for a new system. Wi-Fi 7 earns its price with recent phones and laptops, a fast fibre plan and wired backhaul, so check your devices first.

Wi-Fi 6 handles many devices at once and helps battery-powered gear last longer. 6E adds the uncrowded but short-ranged 6 GHz band, best in the same room as a node or between nodes. 7 adds wider channels and multi-link, using more than one band at once.

  • iPhone. The 15 Pro and 15 Pro Max have Wi-Fi 6E. Every iPhone 16 model except the 16e, the iPhone 17 range and the iPhone Air have Wi-Fi 7.
  • Windows laptop. In Command Prompt, type netsh wlan show drivers: 802.11ax means Wi-Fi 6 or 6E, and 802.11be means Wi-Fi 7.
  • Mac. Hold Option and click the Wi-Fi icon in the menu bar to see the PHY mode.

Wi-Fi 6, 6E or 7 for a home?

Newer isn't automatically better value. What matters is your plan, your devices and how the nodes connect.

Swipe to compare

Wi-Fi 6Wi-Fi 6EWi-Fi 7
Bands2.4 and 5 GHz2.4, 5 and 6 GHz2.4, 5 and 6 GHz
Supported by most phones and laptops in usePartialPartial
Uses the uncrowded 6 GHz band
Uses two bands at once (multi-link)
Fastest band's reach through brickFair, on 5 GHzShort, on 6 GHzShort, on 6 GHz
WPA3 security
PriceLowestMidHighest
Pays off withMost homes and most NBN plansNew devices in the same room as a nodeFast fibre plans, new devices and wired backhaul

No Wi-Fi standard can carry more than your internet plan delivers. A newer one helps busy households, file transfers around the house and the link between nodes.

Placement, the NBN box and the rooms that matter

Where the internet enters decides where the Wi-Fi starts. In many Canberra homes the NBN box is in the garage or at one end.

  • Fibre to the premises. The router plugs into the NBN box. If cabling runs to the middle of the house, the main node moves there.
  • Fibre to the node or curb. The modem (and on fibre to the curb, the NBN device) stays on the main phone socket for line speed, and cable or mesh carries the signal somewhere better.
  • Starlink and fixed wireless. The router position depends on the cable route from outside, so plan it before the install.

Streaming, gaming and video calls are the most demanding jobs. Where we can, we cable the TV, console and home-office desk to the nearest node; where we can’t, that room gets a strong 5 GHz signal.

Packages

Starting points we tailor to your property. Every package is quoted after a quick look.

Compact home

Units, townhouses and single-storey brick veneer homes with one or two weak rooms

  • Speed tested at the NBN box with a cable
  • Signal mapped in every room before we start
  • Two mesh nodes, the main one moved out of the garage where cabling allows
  • Main, guest and smart-home networks
  • Every room tested again before we leave
Get this quoted

Family home

Two-storey, split-level and long single-storey homes, plus homes with a home office

  • Everything in the compact home
  • Three nodes, placed level by level
  • Wired backhaul using existing data points where they exist
  • TV, console and home-office desk cabled to the nearest node
  • Console NAT checked so online games connect
  • Parental controls set up in the app
Get this quoted

Whole property

Double brick, granny flats, studios and outdoor living areas

  • Everything in the family home
  • Wired access points where mesh can't get through the walls
  • A link to the granny flat or studio: mesh, cable or point-to-point
  • An outdoor-rated access point for the deck or pool
  • In-wall cabling scoped, for a registered cabler where needed
Get this quoted

Before you book

Five minutes of checks tells us, and you, whether it's the Wi-Fi, the router or the connection.

Stop and call us if: If the fibre NBN box shows a red Optical or Alarm light, or no lights at all, it's the line, not the Wi-Fi, so call your provider. Don't open wall plates or run cable through walls or ceilings yourself: fixed cabling has to be installed by a registered cabler.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Great friendly service, on time to solve the problem

Bruce W., Google review

Duvi came out to fix my computer today and I'm so very happy to say that it is now working again! I'm so grateful as Duvi saved me thousands of dollars because a major electronics chain told me i needed a new computer.

Maree W., Google review

Prompt, professional, and very helpful. Highly recommend.

CHRISTINE F., Google review

Questions about Wi-Fi and mesh

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
Will mesh Wi-Fi make my internet faster?

It makes the speed you already pay for available throughout the house. It can't make your NBN plan faster than it is. We test the speed arriving at your connection first, and if the plan itself is the limit, we'll tell you.

How many mesh nodes do I need?

It depends more on the walls than the floor area. A compact brick-veneer home may only need two, while a double-brick home or a long single-storey house can need three or four. We measure before recommending anything, so you don't pay for nodes you won't use.

Is wired backhaul worth it?

Yes, whenever there's a practical path for a cable. Wired backhaul frees the wireless radios to serve your devices and gives each node the full speed of the connection. It's the single biggest improvement you can make to a mesh system.

Do I need Wi-Fi 7?

Not necessarily. Wi-Fi 6 is plenty for most homes and most NBN plans. Wi-Fi 6E and 7 pay off when you have newer phones and laptops that can use them, a fast plan, and wired backhaul or nodes in the same room as the devices.

Do I need mesh, or just a better router?

In a unit, a townhouse or a compact home with the router somewhere central, one good router set up properly is often enough, and our router setup visit covers it. Once there's double brick, a second storey, a granny flat or a router stuck in the garage, more than one access point is usually the answer.

Can you keep my provider's modem?

Usually. We either keep it as the modem and let the mesh system run the Wi-Fi, or replace it if it's the weak link. Either way, we set it up so you don't end up with two routers fighting each other, which causes problems with gaming and video calls.

Why won't my smart plug connect to the Wi-Fi?

Many smart-home devices only work on the 2.4 GHz band and struggle when 2.4 and 5 GHz share one network name. We set up a separate 2.4 GHz network for them, which also keeps them apart from your computers and phones.

Can you get Wi-Fi to my granny flat?

Yes. A granny flat close to the house can often take a mesh node near a window facing the house. Further away, or behind brick, a buried cable or a short point-to-point wireless link carries the connection, with an access point inside.

Do you run network cable through the walls?

Permanent cabling inside walls and ceilings has to be installed by a registered cabler under Australia's cabling rules. If your home needs new in-wall cabling, we'll scope it and explain how it would be done before anything is quoted. Often, existing cabling or careful node placement means you don't need it.

Tell us the rooms, we’ll quote the gear and install

We recommend the gear, install it neatly and show everyone at home how to use it.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Prompt, professional, and very helpful. Highly recommend.”
CHRISTINE F., Google review

Plan your install

Tell us what you want covered. We’ll recommend the gear and quote the install.

Install quoteTB-·····

What are we installing?
Property

What happens next

  1. We call you back, 9 am to 8 pm, 7 days.
  2. We recommend the gear and confirm a fixed quote.
  3. We book the install at a time that suits you.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online