Controller drift repair in Canberra for DualSense, Xbox and Joy-Con
Your character walks off on its own, the camera creeps, or a trigger has stopped working. We replace worn stick modules on PlayStation, Xbox and Nintendo controllers at our Mitchell workshop, fit Hall effect and TMR upgrades where your controller takes them, and tell you honestly when a new controller makes more sense.
“Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.”
- Open 7 days, 9 am to 8 pm
- 90-day warranty
- Quote before work
- DualSense, Xbox, Elite Series 2 and Joy-Con
- Hall effect upgrades for popular controllers
- Calibrated and tested in a real game
- Honest advice if a new controller makes sense
- 90-day warranty on parts and labour

- Stick drift
- Confirmed before we start
- Turnaround
- Same day to 2 business days
- Where
- Mitchell workshop, open 7 days
- Warranty
- 90 days, parts and labour
Rather we call you?
Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.
- for many stick swaps when the module is in stock
- Same day
- PlayStation, Xbox and Nintendo controllers
- 3 platforms
- open 9 am to 8 pm at the Mitchell workshop
- 7 days
- warranty on parts and labour for workshop repairs
- 90 days
Controller faults we fix
Character or camera moves on its own
Classic drift. The stick's resistive track has worn or picked up dust, so it reports movement at rest.
Stick won't return to centre
A weak or broken centring spring, or a worn gimbal. A new stick module fixes both.
Can't reach full speed or a full turn
The stick no longer reports its full range. Calibration helps a little; a new module fixes it.
Stick click (L3 or R3) not working
The push switch under the stick has worn. It's part of the module, so it's replaced with it.
DualSense trigger with no resistance
A broken spring or a fault in the adaptive trigger. Check the trigger effect isn't switched off first.
Bumpers or buttons not registering
Worn switches or contacts. Elite Series 2 bumpers are a well-known example.
Won't charge or keeps disconnecting
A worn USB-C port, a tired battery, or on Joy-Con, dirty or bent rail contacts.
Drift came back after an earlier repair
Usually a low-quality replacement module. A Hall effect or TMR stick stops wear-based drift.
Spilled drink, sticky buttons
Sugar sets around switches and stick tracks. A strip-down and clean fixes most; corroded parts are replaced.
Repairs and prices
Pick the job. We confirm a fixed price for your exact model before any work starts.
What happens next
Tell us the controller
Call 1300 224 027 or start a repair ticket online with the controller model and which stick drifts. Walk-ins are welcome, 9 am to 8 pm.
We measure and quote
We read both sticks on a tester, check the buttons and triggers, and give you a fixed quote for a standard or Hall effect stick.
We replace the module
Soldered sticks are desoldered cleanly and the new module fitted; Joy-Con sticks swap on their ribbon. Then each stick is calibrated.
Tested in a game
Centre, full range, stick clicks and triggers are checked on a tester and in a game before we call you.

Inside a controller
Where drift comes from.
- Thumbstick modulesWear in the sensors causes drift. Replaced or upgraded.Drawn in red: the part we replace most
- Triggers and buttonsSticky after spills, worn after years of play.
- BatteryShort sessions mean a tired battery.
- Charging portLoose cables and no charge.
Why controllers drift
Almost every standard stick is a pair of potentiometers: a small wiper sliding across a carbon track, one for each axis. When the reading at rest drifts off centre, the console sees a push that isn’t there.
- The track wears. Every movement wears the carbon track a little.
- Dirt gets in. Dust, skin oils and crumbs work in through the gap around the stick, and Canberra’s dry, dusty summers don’t help.
- Deadzones hide it. Software hides mild drift for a while, so it seems to appear suddenly in one fast shooter while menus feel fine.
- Only a new module lasts. Cleaning can buy time when dust is the cause, but once the track has worn, the stick module needs replacing.
It isn’t bad luck or rough play: it happens to DualSense, Xbox and Joy-Con controllers alike. The how to fix controller drift guide walks through the checks to do at home before you book.
What you get with a controller repair
A stick swap is only as good as the module and the soldering behind it.
Clean solder work
DualSense and Xbox sticks are soldered to the board. We desolder the old module carefully so the pads survive, and check every joint under magnification.
Calibrated after fitting
Each new stick is calibrated and its full range checked, so the centre and the edges read correctly.
Tested in a real game
We test aiming, walking and menus in a game, not just on a tester, before we call you.
Both sticks measured
When one stick drifts, the other is often close behind. We measure both and tell you, then you decide.
Hall effect where it fits
We check whether your controller and board revision take a Hall effect or TMR module, and explain the trade-offs.
Repair before replace
A new stick costs a fraction of a premium controller. If the battery, shell and buttons are all worn too, we'll say a new one makes more sense.
90-day warranty
Parts and labour are covered. If something isn't right, we come back and make it right.
How the repair differs by controller

Some sticks are soldered, some plug in and one is swapped by hand, which decides how the job is done.
DualSense, DualShock 4 and Xbox
Sticks are soldered to the main board through a row of pins. We desolder the old module carefully so the pads aren’t lifted, then inspect every joint under magnification.
Joy-Con and Joy-Con 2
Sticks plug into a small ribbon connector, so the swap needs care with the latch but no soldering. A Joy-Con 2 takes longer to open, as a glued plastic strip hides some screws.
Switch Lite
The same style of stick, but inside the console, so the battery and several other parts come out first. See Nintendo Switch repairs for the rest of the Lite.
DualSense Edge and Elite Series 2
Edge modules are designed to swap by hand, and Sony sells replacements. The Elite looks just as premium, but its sticks are soldered, so drift is a bench job.
Is it drift, or something else?
Not every wandering stick needs a new module. Here's how the symptoms split.
Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.
Hall effect and TMR: are they worth it?

Hall effect sticks read position with a magnet and a sensor instead of a wiper, so nothing wears in the part that measures.
TMR uses the same idea with a more sensitive, lower-power sensor.
- Worth it if a controller has drifted before or gets played daily, because both stop wear-based drift.
- Not magic. The springs and gimbal still wear, and both types need calibrating after fitting, which we do before you collect.
- Battery life. Hall effect sticks draw a little more power, so battery life can drop slightly, while TMR mostly avoids that.
- Compatibility. It depends on the controller and, for a DualSense, the board revision printed inside (a BDM number). We open it and check before quoting.
Stick types compared
Three kinds of stick do the same job in very different ways.
Swipe to compare
| Standard (potentiometer) | Hall effect | TMR | |
|---|---|---|---|
| How it senses position | A wiper on a carbon track | A magnet and a Hall sensor | A magnet and a TMR sensor |
| Immune to track-wear drift | |||
| Springs and gimbal | Wear over time | Wear over time | Wear over time |
| Battery draw | Low | A little higher | Low |
| Calibration after fitting | Usually not needed | Required | Required |
| Feel | Original | Close to original | Close to original |
| Modules available for | Every controller | Most popular controllers | Fewer controllers so far |
| Relative price | Lowest | Higher | Higher |
A quality standard module is the sensible choice for most controllers. Hall effect or TMR makes sense if a controller has drifted before or gets played every day.
Triggers, buttons, batteries and ports

Drift is the headline fault, but it’s rarely the only worn part. Any of these can be done with a stick, which saves a second trip to Mitchell.
- DualSense adaptive triggers: a broken spring in the motor and gears leaves one limp or stuck
- Xbox Elite Series 2 bumpers, which are known for failing to register
- Joy-Con SL and SR buttons and rail latches, worn by attaching and detaching
- Worn internal batteries in DualSense, DualShock 4, Elite Series 2 and Joy-Con: dying mid-session is often this
- USB-C ports worn loose from charging while playing
A controller that’s had a drink over it needs a full strip-down and clean. As on our water damage repair page, don’t charge it until it’s been opened and dried.
Controllers we repair
Stick modules for the common controllers are usually in stock. For anything less common, call us with the model first.
PlayStation
- DualSense
- DualSense Edge
- DualShock 4
- PlayStation Portal: ask us
Xbox
- Xbox Wireless Controller (Series X|S)
- Xbox One Wireless Controller
- Xbox Elite Series 2
- Xbox Elite Series 2 Core
Nintendo
- Joy-Con (L) and (R)
- Joy-Con 2 (L) and (R)
- Nintendo Switch Pro Controller
- Switch 2 Pro Controller
- Switch Lite built-in sticks
Other
- Steam Deck and Steam Deck OLED: ask us
- Third-party pro controllers: ask us
Repair, replace or claim under warranty
A standard DualSense or Xbox controller is worth a stick repair when the rest of it is sound. An Edge or Elite Series 2 costs far more to replace, so repair is almost always the better buy.
We’d point you to a new controller when the battery no longer lasts a session and the shell is cracked and buttons are failing as well. Once warranty is ruled out, bring it in with its charging cable and tell us which stick drifts and in which direction.
Controllers compared for repair
How the stick is fitted decides how long the job takes.
Swipe to compare
| DualSense | Xbox Wireless | Joy-Con | |
|---|---|---|---|
| Stick fitting | Soldered to the board | Soldered to the board | Ribbon cable, no soldering |
| Hall effect option | Yes, most board revisions | Yes, most revisions | Original Joy-Con; ask about Joy-Con 2 |
| Power | Internal rechargeable battery | AA batteries or a rechargeable pack | Internal battery, charged on the rails |
| Charging | USB-C | USB-C; micro-USB on older Xbox One pads | Rail contacts |
| Common faults besides drift | Adaptive trigger springs, USB-C port | Bumpers, triggers, battery contacts | Rail latch, SL and SR buttons |
| Pro version | DualSense Edge: swappable modules | Elite Series 2: soldered sticks | Switch Pro Controller: full-size pad |
Try this first
Mild drift is sometimes software or dust. These steps are safe and take ten minutes.
What Canberra customers say
Real Google reviews. We ask every customer, every time.
Excellent professional service- very prompt home visit, quick diagnosis of my computer problem and then it was fixed and returned to my house next day. I will certainly use this company again.
Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.
Tech Box saved the day!!!!!!!!!!! With my laptop on the brink of despair, I turned to Tech Box for help, and they delivered beyond expectations. Their expert team swiftly diagnosed and resolved the issue, displaying a level of professionalism that's truly commendable.
Questions about controller drift repair
Straight answers. More in our questions and answers.
Is it worth fixing a drifting controller?
Usually, yes. A stick module costs much less than a new controller, and the gap is far bigger for a DualSense Edge or Elite Series 2. We'll suggest replacing it instead if the battery, shell and buttons are all worn as well.
What's the difference between Hall effect and TMR sticks?
Both read the stick's position with a magnet and a sensor, so nothing wears in the part that measures. TMR uses a newer, more sensitive sensor that draws less power, so it's kinder to battery life. Either stops wear-based drift.
Will a Hall effect stick stop drift for good?
It stops the track wear that causes most drift. The springs and gimbal still wear slowly, and a big knock can shift the calibration, but that's fixed by recalibrating rather than replacing the stick.
Can you fix a DualSense Edge?
Yes. Its stick modules are designed to be swapped by hand, and Sony sells replacements, so you can do that part yourself. If the module socket, triggers, buttons or battery are at fault, that's a repair for us.
Should I go to Sony, Microsoft or Nintendo first?
If the controller is still under the maker's warranty, check with them first, because it may cost you nothing. Faults like drift may also be covered by the consumer guarantees under Australian Consumer Law, and the ACCC's website explains how they work.
Why do Joy-Con drift so often?
Their sticks are small and sit in an open housing that collects dust, and they get carried around more than most controllers. Joy-Con 2 still use potentiometer sticks, so they can drift too. Original Joy-Con sticks are one of the quickest swaps we do, because there's no soldering.
Can you fix the sticks on a Switch Lite?
Yes. They're the same ribbon-cable style of stick as a Joy-Con, but they sit inside the console, so we open it and lift out the battery and a few other parts to reach them. It takes longer than a Joy-Con and is still a routine repair.
How long does a controller repair take?
Many stick swaps are done the same day when the module is in stock, and most repairs are back within 2 business days. Hall effect and TMR modules for less common controllers may need ordering, and we'll tell you when we quote.
Will my controller still pair with my console?
Yes. A stick repair doesn't change pairing or your console settings. If it doesn't reconnect on its own, plug a PlayStation or Xbox controller in with a USB cable, or slide a Joy-Con onto the console, and it pairs again.
More console repairs
- PS5 repairsBlue light, no signal, overheating, disc drives and storage fixed on every PS5 design, quoted first.
- PS5 overheatingShutdowns, roaring fans and heat warnings fixed with a proper internal clean, then tested under load.
- Console HDMI portsNo signal, flicker or a loose port fixed with micro-soldering, once the TV and cable are ruled out.
- PS5 disc driveDiscs reading, loading and ejecting again on original, Slim and Pro PS5s, with a fixed quote first.
- Xbox repairsPower, HDMI, overheating and disc drive faults fixed on Xbox Series X, Series S and Xbox One.
- Nintendo Switch repairsCharging, Joy-Con drift, game card and screen faults fixed on every Switch, from the original to Switch 2.
Controller drift repair across Canberra and the region
Workshop in Mitchell, visits 7 days. Find your district.
- Belconnen27 areas
- Gungahlin17 areas
- Inner North Canberra13 areas
- Inner South Canberra11 areas
- Woden Valley13 areas
- Weston Creek8 areas
- Molonglo Valley5 areas
- Tuggeranong18 areas
- Fyshwick, Hume and east Canberra7 areas
- Rural ACT3 areas
- Queanbeyan and surrounds11 areas
- Yass Valley and Murrumbateman6 areas
- Bungendore, Wamboin and Braidwood6 areas
Get it booked in today
Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.
1300 224 027Calls answered 9 am to 8 pm, 7 days.
- Quote before any work starts
- Workshop in Mitchell, visits across Canberra
- If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”



