Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

Computer won't turn on? Desktop PC power and start-up repairs in Canberra

Nothing when you press the button, fans that spin with a black screen, or a logo that never gets to Windows. We test the power supply, memory, graphics, motherboard and boot drive against known-good parts at our Mitchell workshop, so you only pay for the part that has actually failed. Your files are almost always safe, and we check before anything is changed.

“Very quick. Very efficient. Excellent value for money.”
Keith J., Google review
  • Open 7 days, 9 am to 8 pm
  • 90-day warranty
  • Quote before work
  • We prove which part failed before quoting
  • Power supplies tested under real load
  • Files protected and BitLocker keys checked
  • Office PCs, gaming towers and all-in-ones
  • Open 7 days, calls until 8 pm
An open desktop computer on a bench with a power supply tester on the 24-pin cable, a multimeter and an amber motherboard debug light glowing
Assessment
Confirmed before we start
Turnaround
Same day for most power supply faults when the part is in stock
Where
Mitchell workshop or on-site across Canberra
Warranty
90 days, parts and labour

Rather we call you?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.

We only use your number to call you about this.

for most power supply swaps when the part is in stock
Same day
after testing, before any part is ordered or fitted
Fixed quote
warranty on parts and labour for workshop repairs
90 days
open, with calls answered until 8 pm
7 days

What your computer is doing

  • Completely dead

    No lights, no fans, nothing when you press the button. Usually the power supply, sometimes the cable, switch or button lead.

  • Clicks or twitches, then stops

    The supply starts, sees a fault and shuts itself down. We find the short before fitting anything new.

  • Fans spin, no picture

    Power is reaching the board. Memory, graphics, the firmware or the monitor connection are the suspects.

  • Beeps or blinking lights

    Beep patterns, debug lights and Dell or HP blink codes point to specific parts. Note the pattern for us.

  • Turns off after a few seconds

    Often a processor cooler that has come loose, a supply that drops out under load, or a short.

  • Dead after a storm or power cut

    Surges and brownouts usually take out the power supply, and occasionally the network port as well.

  • Black screen after an upgrade or BIOS update

    Memory training, an incompatible part or a failed update. Most of these can be recovered.

  • Logo, then stuck or 'no boot device'

    The hardware is working but the drive or Windows isn't. Your files come first.

  • All-in-one won't start

    We test the external power brick first. Inside, the parts are laptop-style and usually repairable.

Pick the job. We confirm a fixed price for your exact model before any work starts.

What happens next

  1. Tell us what it does

    Call 1300 224 027 or start a repair ticket. Lights, fans, beeps or nothing at all: what happens when you press power narrows it down.

  2. We test, then quote

    Known-good parts and error codes prove which part failed. You get a fixed quote, and nothing goes ahead until you say yes.

  3. We repair and stress test

    The failed part is replaced, firmware updated where needed, and the PC runs under load while we watch temperatures and voltages.

  4. Collect it working

    We explain what failed and why. If something isn't right afterwards, we make it right.

Exploded technical drawing: inside a desktop pc

Inside a desktop PC

Every part can be tested and swapped.

  • Power supplyThe first suspect when nothing happens at all.Drawn in red: the part we replace most
  • MotherboardDebug lights and beeps tell us where to look.
  • MemoryReseated or replaced for random crashes.
  • Graphics cardArtefacts, no display or fan noise under load.
  • NVMe driveFast storage for boot and apps.

No power, no picture, no Windows: where it stops matters

Starting a computer is a relay, and where it stops tells us which part dropped the baton.

  1. Standby. The power button tells the motherboard to wake the power supply.
  2. Power good. The supply brings up its voltages and signals that power is good.
  3. Firmware. The processor runs the firmware, which trains the memory and starts the graphics.
  4. Boot drive. The firmware hands over to the boot drive to load Windows.

Logo, then an error or a repair loop? The hardware mostly works, and it’s the boot drive or Windows: see our guide to a PC that won’t boot.

How we find what failed

Guessing gets expensive. A new motherboard for a PC that only needed a power supply is the classic mistake, and testing avoids it.

  • Known-good part testing

    Suspect supplies, memory and graphics cards are swapped for known-good parts, so the diagnosis is proven, not assumed.

  • Error codes read

    Debug lights, Dell and HP blink codes, beep patterns and Windows crash logs are all read before we quote.

  • Supplies tested under load

    A plug-in tester only checks idle voltages. We check the supply holds steady while the computer works hard.

  • Files protected first

    If the drive is involved, we copy your files before any repair or reinstall touches it.

  • BitLocker handled

    We check for drive encryption and help you find the recovery key before changing anything that could trigger it.

  • Quote before parts

    You get a fixed price for the failed part and labour. Nothing is ordered until you say yes.

  • Stress tested after

    Repaired PCs run under heavy load while we watch temperatures and voltages, before we call you.

  • On-site for offices

    When several PCs are down after a storm or power cut, we can come to you and triage on the spot.

The power supply, and why we test it under load

A supply tester and multimeter on the 24-pin cable, with the board's debug light showing where start-up stops.
A supply tester and multimeter on the 24-pin cable, with the board's debug light showing where start-up stops.

Power supplies are the most common failure in a desktop that won’t start. Capacitors dry out with years of heat, and cheap units bundled with many cases have weak protection.

Canberra’s summer storms add surges and brownouts, which is why a computer that died “after the power went off” usually has a failed supply. A plug-in tester only checks voltages with nothing drawing on them, so we test with known-good supplies and under real load.

  • Office desktops. Dell OptiPlex, HP ProDesk and EliteDesk, and Lenovo ThinkCentre often use their own supplies and non-standard plugs instead of the 24-pin, so we match the exact part.
  • Gaming PCs. Sized with headroom for the graphics card, with the 16-pin 12VHPWR or 12V-2x6 connector checked for heat damage.

Why won't my computer turn on?

What happens when you press the button narrows it down. Here's how we read it on the bench.

What you noticeLikely causeThe fix
What you noticeNo lights, no fansLikely causePower supply, cable, switch or power button leadThe fixTest with a known-good supply, then the button lead
What you noticeClick or fan twitch, then offLikely causeSupply shutting down to protect against a shortThe fixDisconnect parts one at a time to find the short
What you noticeFans run, black screenLikely causeMemory, graphics card, monitor port or firmwareThe fixRead debug lights, test memory and the card
What you noticeDell power light blinks amber and whiteLikely causeA blink code naming the failed componentThe fixLook up the code for your model, replace that part
What you noticeStarts, then off within secondsLikely causeLoose cooler, a supply failing under load, or a shortThe fixCheck the cooler and paste, test the supply under load
What you noticeDead after a storm or power cutLikely causeSurge damage, usually to the supplyThe fixReplace the supply, check the board and network port
What you noticeLogo, then 'no boot device'Likely causeFailed drive or a changed BIOS settingThe fixCheck drive health, copy files, repair the boot setup
What you noticeBurning smell or a popLikely causeFailed component, usually in the supplyThe fixSwitch off at the wall and bring it in

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Fans spin, screen stays black

The order we test in: power supply first, then memory, graphics card and drive, and the motherboard last.
The order we test in: power supply first, then memory, graphics card and drive, and the motherboard last.

When the fans run but nothing appears, check the simple things first, then memory.

  • Input and socket. Check the monitor’s input. With a graphics card, plug the screen into the card: the motherboard’s ports are usually disabled, a common catch after a desk move.
  • Memory. A stick that’s slightly unseated, failing or on an unstable XMP or EXPO profile stops the machine before anything shows.
  • Debug lights. Many boards have four: CPU, DRAM, VGA and BOOT. The one that stays lit marks the stage that failed.
  • Dell blink codes. OptiPlex power lights blink amber and white: two amber then three white means no memory detected.

A failed BIOS update is often recoverable with the board’s flashback button, on boards that have one.

No power, no picture or no Windows?

Three different faults that all get described as 'it won't turn on'. Where it stops tells you which.

Swipe to compare

No powerPower, no picturePicture, no Windows
What you seeNo fans, no lightsFans and lights, black screenLogo or error, then stops or loops
Most likely causePower supply, cable or switchMemory, graphics or firmwareBoot drive or Windows files
Also checkFront power button leadMonitor input and which portA recent update or BIOS change
Debug lights helpPartial
Files at riskRarelyRarelySometimes, if the drive is failing
Usual fixPower supply replacementReseat or replace memory, card or BIOSNew drive, or a Windows repair
Usually same dayPartial

If you're not sure which you have, a short phone video of what happens when you press the button tells us a lot.

Motherboard and processor faults

Memory and drives are reseated or replaced once testing points to them.
Memory and drives are reseated or replaced once testing points to them.

If a known-good supply, memory and graphics card don’t bring it to life, the motherboard or processor is next.

  • A short that makes the supply cut out instantly
  • Bulging capacitors on older boards
  • Bent processor socket pins after a DIY upgrade
  • Corrosion from a spill

A board for a two-year-old gaming PC is usually worth fitting, but usually not for a seven-year-old office PC that can’t run Windows 11. The middle path is a new board, processor and memory in your case: see custom PC builds.

Computers we repair

We repair most Windows desktops, small office PCs, gaming towers and all-in-ones. Brand-specific supplies and boards are ordered in when they're needed.

Office and small form factor PCs

  • Dell OptiPlex Tower, SFF and Micro
  • Dell Pro desktops
  • HP ProDesk and EliteDesk
  • HP Pro Mini and Elite Mini
  • Lenovo ThinkCentre M series Tower, SFF and Tiny

Home and gaming desktops

  • HP Pavilion and OMEN
  • Dell Inspiron and XPS desktops
  • Alienware Aurora
  • Lenovo IdeaCentre and Legion Tower
  • Custom ATX and micro-ATX builds, Intel and AMD

All-in-ones and mini PCs

  • HP All-in-One and EliteOne
  • Dell Inspiron and OptiPlex all-in-ones
  • Lenovo IdeaCentre and ThinkCentre all-in-ones
  • ASUS all-in-ones
  • Intel NUC and ASUS NUC

Apple

  • iMac, Intel and Apple silicon
  • Mac mini, Intel and Apple silicon

Your files are almost always fine

A dead power supply, memory stick or motherboard doesn’t touch your files, which live on the drive. Beyond economical repair, we copy them to a new computer or an external drive.

  • Microsoft account. Most people have it saved at account.microsoft.com under Devices.
  • Business PCs. Often stored in Microsoft Entra or Intune.

We can move everything to a replacement. If the drive itself has failed, that’s data recovery, and we’ll tell you honestly what’s likely.

Which part failed, and is it worth fixing?

Relative costs only. We quote the exact part once testing has proven which one it is.

Swipe to compare

Power supplyMemoryBoot driveMotherboard
How often it's the causeMost oftenCommonCommonLess often
Standard off-the-shelf partYes, on most towersPartial
Relative costLow to midLowLow to midHighest
Files left untouchedNo, copy them first
Risk to other partsSome, if it fails badlyVery lowVery lowLow
Worth fixing on a 7-year-old PCUsually not

Office PCs from Dell, HP and Lenovo often need brand-specific supplies and boards, which we order in when needed.

Laptops, all-in-ones and office PCs

HP, Dell, Lenovo and ASUS all-in-ones use laptop-style parts behind the screen, often powered by an external brick, which we test first.

When several office PCs won’t start after a storm or power cut, we can come to you, triage on site and bring the failed ones back.

Five-minute checks before you book

These are safe and need no tools. Do them in order and note what changes.

Stop and call us if: If you smell burning, hear a pop or see a spark, switch off at the wall and leave it off. Don't open the power supply: it can hold a dangerous charge even when unplugged.

What Canberra customers say

Real Google reviews. We ask every customer, every time.

Tech Box saved the day!!!!!!!!!!! With my laptop on the brink of despair, I turned to Tech Box for help, and they delivered beyond expectations. Their expert team swiftly diagnosed and resolved the issue, displaying a level of professionalism that's truly commendable.

Gihani W., Google review

Very personable and professional attention to the problem. Would use again.

Paula K., Google review

The service I have received from TechBox has been nothing but amazing!! I haven’t seen such service for years.I had a problem and asked for their help , from the beginning to the end they were tenacious working through the issues I had with my software. Thank you so much for your help TechBox. You people are most professional I will have no problem…

Steve W., Google review

Questions about PC won't turn on

Straight answers. More in our questions and answers.

Still deciding?

Call a Canberra technician, 9 am to 8 pm, 7 days.

Call 1300 224 027
Why won't my computer turn on at all?

The most common cause is a failed power supply, followed by the power cable or switch, the front power button lead and motherboard faults. Check the wall point, the switch on the back of the supply and the cable first. If it's still dead, we test each part so you only pay for the one that has actually failed.

The fans spin but there's nothing on the screen. What's wrong?

Power is reaching the motherboard, so check the monitor's input and make sure the cable is in the graphics card, not the motherboard ports. After that, memory is the most likely suspect, then the graphics card and the firmware. The debug lights on many motherboards point to which.

Will I lose my files?

Almost never. Power supply, memory and motherboard faults don't touch the drive, and we can copy your files off even if the computer itself can't be fixed. If the drive is encrypted with BitLocker, you'll need the recovery key from your Microsoft account to read it in another computer.

My computer died after a power cut or storm. Can it be fixed?

Usually. Surges and brownouts most often kill the power supply, which is a standard part on most towers. Sometimes the network port or motherboard is damaged too, so we test those before quoting. A surge-protected power board is worth fitting afterwards.

It turns on for a few seconds, then switches off. Why?

That's often a processor cooler that has come loose or lost contact, a power supply that drops out under load, or a short. Don't keep retrying, because repeated starts with a loose cooler can overheat the processor. Bring it in and we'll find which.

My PC shows a black screen after a BIOS update or new memory. Is it broken?

Give it five minutes first. Newer PCs, especially AMD Ryzen 7000 and 9000 systems with DDR5, can take several minutes to train their memory after a change. If it's still black, a failed BIOS update can often be recovered with the motherboard's flashback feature, and incompatible memory can be swapped.

Is it worth repairing, or should I buy a new PC?

A power supply, memory stick or drive is almost always worth replacing. A motherboard on a PC more than six or seven years old, or one that can't run Windows 11, usually isn't. We'll tell you which applies and give you both options.

Can you come to me?

Yes. On-site visits are $189 for the first hour, then billed in 30-minute blocks, and suit offices with several PCs down or a heavy tower that's hard to move. If a part has failed, we usually bring the PC back to the workshop to test and repair it properly.

What should I bring to the workshop?

Just the computer and its power cable. Bring the monitor and its cable too if the problem is no picture, and the power brick if it's an all-in-one or mini PC.

Get it booked in today

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online