Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

How to fix

Computer won't boot? How to get Windows starting again

Your PC powers on but never reaches the Windows desktop. These fixes run from the safest to the most involved, with the exact Windows 11 and 10 menus, and tell you when to stop before your files are at risk.

  • Moderate
  • 20 to 60 minutes
  • 4 min read

Rather we fix it? Same day for most power supply faults when the part is in stock at our Mitchell workshop, with a fixed quote first.

Open 7 days, 9 am to 8 pm
“Prompt, professional, and very helpful. Highly recommend.”
CHRISTINE F., Google review
A desktop PC tower with its side panel off on a desk, memory sticks removed and lying on an anti-static bag, a monitor dark beside it

Key takeaways

  • If the fans and lights come on but Windows doesn't load, the cause is usually software, a setting or the boot drive, and your files are usually still there.
  • Unplug every USB device first. A forgotten USB stick, phone or SD card is one of the most common causes of a 'no boot device' message.
  • Windows has its own repair tools. Interrupt start-up two or three times, or hold Shift and choose Restart, to reach them.
  • Find your BitLocker recovery key before you change any firmware setting. Without it, nobody can read an encrypted drive.
What you’ll need: A wired USB keyboard, Your BitLocker recovery key, A phone or second computer to look up the key, A USB drive for copying files off.

Rather we just fix it?

No power, no picture or no Windows: we find the failed part, protect your files and quote before fixing.

PC won't turn on1300 224 027

Try these fixes, in order

Start at the top. Most problems are solved in the first few steps. Tick them off as you go.

Stop and call us if: none of these work, the fault is probably hardware. Our pc won't turn on service picks up where this guide stops.

What your PC's start-up screen is telling you

The message on screen, and where start-up stops, usually points straight to the cause.

What you noticeLikely causeThe fix
What you notice'Reboot and select proper boot device'Likely causeUSB device first in boot order, or drive not detectedThe fixUnplug USB devices, put Windows Boot Manager first
What you noticeHP 'Boot Device Not Found (3F0)'Likely causeDrive not detected, or boot settings resetThe fixRun HP diagnostics (F2), then check the boot order
What you notice'Preparing Automatic Repair' loopLikely causeDamaged boot files, a bad update or driverThe fixAdvanced options: Startup Repair, Uninstall Updates, Safe Mode
What you noticeBlue screen asking for a BitLocker keyLikely causeTPM noticed a firmware, Secure Boot or hardware changeThe fixEnter the 48-digit key from your Microsoft account
What you noticeStuck on the Dell, HP or Lenovo logoLikely causeA USB device hanging start-up, or a failing driveThe fixUnplug everything, then run the built-in diagnostics
What you noticeSpinning dots for over an hourLikely causeUpdate still finishing, or a struggling driveThe fixWait while the drive light flickers, then force one restart
What you noticeBlack screen with a cursor after sign-inLikely causeWindows Explorer or display driver failingThe fixCtrl+Alt+Del > Task Manager > Run new task: explorer
What you noticeINACCESSIBLE_BOOT_DEVICE stop codeLikely causeStorage mode changed, or a storage driver updateThe fixUndo the BIOS storage change, uninstall the latest update
What you noticeError 0xc000000f or 0xc0000225Likely causeBoot configuration data damaged or missingThe fixStartup Repair, or the boot files rebuilt at the bench
What you noticeClicking, grinding or freezing at start-upLikely causeFailing hard drive or SSDThe fixStop retrying. Files copied off before any repair
What you noticeDate and time reset, 'CMOS checksum' errorLikely causeFlat CR2032 coin cell on the motherboardThe fixCoin cell replaced, boot settings set again

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Tried these and still stuck?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, and tells you whether it’s worth bringing in before you travel.

We only use your number to call you about this.

interrupted starts before Windows opens its repair tools
2 to 3
in a BitLocker recovery key, usually saved in your Microsoft account
48 digits
warranty on workshop repairs, parts and labour
90 days
open, with calls answered until 8 pm
7 days
Exploded technical drawing: inside a desktop pc

Inside a desktop PC

Every part can be tested and swapped.

  • Power supplyThe first suspect when nothing happens at all.Drawn in red: the part we replace most
  • MotherboardDebug lights and beeps tell us where to look.
  • MemoryReseated or replaced for random crashes.
  • Graphics cardArtefacts, no display or fan noise under load.
  • NVMe driveFast storage for boot and apps.

Turns on, but won't boot

Starting a PC is a hand-off: the firmware finds the boot drive, Windows Boot Manager loads Windows, then your sign-in screen appears.

Where that hand-off stops is your best clue.

No power at all, or fans with nothing on screen, is a different fault, covered on our computer won’t turn on page.

  • A message before the Windows logo

    Something like “No bootable device” or HP’s “Boot Device Not Found (3F0)” means the firmware can’t find anything to start from.

  • The logo, then a repair loop or error

    Windows itself is damaged or a driver is failing. On current Windows 11 the crash screen is black, not blue, but still shows a stop code worth writing down.

  • Spinning dots that never end

    Usually an update finishing, or a drive struggling to read.

Software fault or hardware fault?

Which column you're in decides whether to keep going yourself or stop.

Swipe to compare

Software or settingsFailing boot driveOther hardware
What you usually seeLogo, then a repair loop or errorFreezing, clicking or 'no boot device'No power, or fans and a black screen
Drive listed in the firmwarePartialCan't check
Built-in diagnostics pass
Windows repair tools help
Files usually safePartial
Safe to keep retryingPartial
Usual fixStartup Repair, remove an update, or resetFiles copied, then a new SSDPower supply, memory or board

If you can't tell which column you're in, the built-in diagnostics are the quickest way to find out.

The usual culprits

Most PCs that stall at start-up come down to one of four causes.

  • An update or driver gone wrong

    A monthly update cut off part way, or a new graphics or storage driver, can stop Windows finishing. If a summer storm cut the power mid-update, start here.

  • A failing drive

    Older hard drives develop bad sectors, and budget SSDs can fail with little warning. Slow start-ups, freezes and files that won’t open in the weeks before are the usual signs.

  • A changed firmware setting

    A BIOS update, a flat motherboard coin cell or someone exploring the settings can reset the boot order or storage mode.

  • Encryption doing its job

    BitLocker asks for a recovery key when it notices a change to the firmware, the TPM security chip or Secure Boot.

Windows recovery options compared

All four live under Troubleshoot > Advanced options in the blue recovery menu. Try them left to right.

Swipe to compare

Startup RepairUninstall latest updateSystem RestoreReset this PC (keep files)
Keeps your files
Keeps your appsPartial
Fixes damaged boot filesPartial
Fixes a bad update or driverPartial
Works without restore points
Typical time5 to 20 minutes10 to 20 minutes15 to 45 minutes1 to 2 hours
When to try itFirstIf it began after an updateIf restore points existLast, once files are safe

None of these help a failing drive. If the diagnostics report a storage error, copy your files off before trying anything that writes to the disk.

BitLocker: the screen that catches people out

Drives from PCs that won't boot are copied on a separate dock before any repair is attempted.
Drives from PCs that won't boot are copied on a separate dock before any repair is attempted.

Windows 11 turns on device encryption automatically on many PCs signed in with a Microsoft account, so plenty of people have BitLocker without knowing it.

When the TPM notices a change at start-up, such as a BIOS update, a firmware setting or a motherboard repair, BitLocker locks the drive and asks for the 48-digit recovery key.

If the prompt returns at every start, a setting still differs from when the drive was encrypted, usually Secure Boot switched off or a changed storage mode. Putting it back stops the prompts.

Deeper checks before you go further

If the quick fixes haven’t worked, these checks tell you whether it’s worth carrying on yourself.

  1. What changed? An update last night, new memory, a power cut, a knock to the desk. Write it down; it saves time at the bench.
  2. What is the drive doing? A light that flickers then stops dead, clicking, spinning up and down, or a long freeze at the logo all point to the drive.
  3. Does Safe Mode start? Then the hardware is very likely fine, and it’s a driver, an update or a start-up app.
  4. Does a USB installer start? A Windows 11 stick made elsewhere with Media Creation Tool proves the processor, memory and board work, and reaches recovery. Choose repair, never install.

What not to do

Once the files are safe, a failed boot drive is replaced with an SSD and Windows is set up again.
Once the files are safe, a failed boot drive is replaced with an SSD and Windows is set up again.

Some well-meant fixes make recovery harder, or impossible.

  • Don’t keep power-cycling a drive that clicks, grinds or freezes. Every start-up on a failing drive can damage more of it.
  • Don’t run chkdsk /r or repair utilities on a suspect drive. They write to the disk and work the weakest areas hardest. Copy files first.
  • Don’t change the SATA, RAID or Intel VMD storage mode to see if it helps. Windows often won’t start after that, and it can trigger BitLocker.
  • Don’t reset or reinstall Windows before your files are safe. A reinstall doesn’t fix a failing drive anyway.
  • Don’t download boot repair tools from search ads or call a number on a pop-up. Microsoft doesn’t phone people about their computers; see our scam safety guide.

When to bring it in

Stop and call us if any of these happen, or if the PC holds files that aren’t backed up anywhere else.

  • The drive isn’t detected
  • The diagnostics report a storage error
  • The drive is making noises
  • Every recovery option has failed

At our Mitchell workshop we check the drive’s health first and copy your files off if it’s struggling. Then we repair the boot setup, fit an SSD or reinstall Windows, with a fixed quote first and a 90-day warranty on parts and labour; if the drive has failed outright, data recovery will tell you honestly what’s likely to come back.

We also come to homes and offices across Canberra and the nearby NSW region, at $189 for the first hour. As Maree W. said after a visit: “Duvi came out to fix my computer today and I’m so very happy to say that it is now working again.”

Common questions

Still stuck? Call 1300 224 027, 9 am to 8 pm, 7 days.

Why does my computer turn on but not boot?

Power is reaching the parts, but something later in the start-up chain fails: the boot order, Windows' boot files, a recent update or driver, or the drive itself. The message on screen usually tells you which. Work through the fixes in order, and stop if the drive isn't detected or the diagnostics report a storage error.

Will I lose my files if Windows won't start?

Usually not. Most boot problems affect Windows' start-up files, not your documents and photos. The real risks are a failing drive, and resetting or reinstalling Windows before your files are copied off. If in doubt, stop and let us copy them first.

Where do I find my BitLocker recovery key?

On another device, go to aka.ms/myrecoverykey, sign in with the Microsoft account used on the PC and match the Key ID shown on screen. Some people printed it or saved it to a USB stick during setup. On a work computer, your IT provider holds it, usually in Microsoft Entra or Intune. Without the key, an encrypted drive can't be read.

My PC is stuck in an Automatic Repair loop. What now?

Choose Advanced options rather than Restart, then work through Startup Repair, Uninstall Updates and Safe Mode. If every option fails or the loop keeps coming back, the boot files may need rebuilding by hand, or the drive may be failing. That's the point to bring it in.

Is it safe to hold the power button to force a restart?

Once or twice to reach the repair tools, yes. Doing it over and over while an update is installing, or on a drive that's clicking, can make things worse. If the drive light is still flickering, let it finish first.

Should I just reinstall Windows?

Only as a last resort, and only once your files are safe elsewhere. Reset this PC with Keep my files is gentler than a clean install, but it still removes your apps. A reinstall won't fix a failing drive, which will simply fail again.

Can you fix it at my home or office?

Yes. On-site visits are $189 for the first hour, then billed in 30-minute blocks, across Canberra and the nearby NSW region. If the drive is failing or a part has died, we usually take the PC back to our Mitchell workshop to copy your files and repair it properly, with a fixed quote first.

Reviews from TechBox customers

Real Google reviews.

Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.

ruth d., Google review

Excellent professional service- very prompt home visit, quick diagnosis of my computer problem and then it was fixed and returned to my house next day. I will certainly use this company again.

ironbark v., Google review

Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.

Steve P., Google review

Still not fixed? We’ll take it from here

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online