Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

How to fix

How to fix a PS5 with no signal on the TV

The console powers on but the TV shows nothing. Work out whether it's the TV, the cable, a video setting or the PS5's HDMI port, in the order that costs least.

  • Easy
  • 15 to 30 minutes
  • 4 min read

Rather we fix it? 1 to 3 business days for most consoles at our Mitchell workshop, with a fixed quote first.

Open 7 days, 9 am to 8 pm
“Duvi was great. Identified and resolved the problem with our computer quickly, and arranged the necessary repairs. Delighted with the outcome.”
ruth d., Google review
The back of a game console with an HDMI cable half plugged in, a spare HDMI cable coiled on the floor

Key takeaways

  • Read the light first. A blue pulse that turns solid white means the PS5 has started and the fault is in the picture path. No light, or endless blue pulsing, is a different problem.
  • Most no-signal PS5s come down to the TV input, the cable, a soundbar in the chain or a video setting, and all of those are free to fix at home.
  • Safe Mode starts the PS5 with a basic, lower-resolution picture. If you get a picture there, the HDMI port is almost certainly working.
  • 4K at 120 Hz needs an Ultra High Speed HDMI cable and an HDMI 2.1 input on the TV. The wrong combination flickers, drops out or shows nothing.
What you’ll need: A spare HDMI cable, ideally Ultra High Speed, The controller's USB cable, A second TV, or a computer monitor with HDMI, A torch (a phone torch is fine).

Rather we just fix it?

No signal, flicker or a loose port fixed with micro-soldering, once the TV and cable are ruled out.

Console HDMI ports1300 224 027

Try these fixes, in order

Start at the top. Most problems are solved in the first few steps. Tick them off as you go.

Stop and call us if: none of these work, the fault is probably hardware. Our console hdmi ports service picks up where this guide stops.

What the symptoms tell you

The light, where the picture fails and what changes it point to the cause. This is how we read a no-signal PS5 on the bench.

What you noticeLikely causeThe fix
What you noticeBlue pulse, then solid white, no pictureLikely causePicture path: TV input, cable, setting or HDMI portThe fixWork through the steps, then book a port check
What you noticeLight pulses blue and never turns whiteLikely causeStart-up fault: system software, storage or boardThe fixSafe Mode checks, then a bench diagnosis
What you noticeNo light and no beepLikely causePower cable, wall socket or internal power supplyThe fixTry another power cable and socket, then book
What you noticePicture in Safe Mode, black after restartLikely causeA resolution, HDR or 120 Hz setting the TV rejectsThe fixLower the video settings, then raise them one by one
What you noticeWorks into the TV, not through the soundbarLikely causeSoundbar or receiver can't pass the signal or HDCPThe fixPS5 into the TV, sound out through eARC
What you noticeSparkles, flicker or dropouts at 4K 120 HzLikely causeCable bandwidth, or a marginal portThe fixUltra High Speed cable, then 4K Video Transfer Rate -1
What you noticePicture cuts out when the cable is touchedLikely causeLoose port or cracked solder jointsThe fixStop moving it and book a port repair
What you noticeNo picture on any TV after a stormLikely causeSurge damage to the HDMI chip beside the portThe fixBench test. A new port alone won't fix it
What you noticeTV keeps switching inputs or turning onLikely causeHDMI-CEC control between the PS5 and TVThe fixSettings > System > HDMI, turn off HDMI Device Link

Not sure which one it is? Send us the symptoms and we’ll tell you before you travel.

Tried these and still stuck?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, and tells you whether it’s worth bringing in before you travel.

We only use your number to call you about this.

holding the power button to reach PS5 Safe Mode
About 7 sec
in a standard HDMI port, on one thin plastic tongue
19 pins
Ultra High Speed HDMI, needed for 4K at 120 Hz
48 Gbps
typical HDMI port replacement at our workshop
1 to 3 days
Exploded technical drawing: inside a home console

Inside a home console

Heat, ports and power: the usual suspects.

  • Cooling fanDust and wear cause noise, heat and shutdowns.Drawn in red: the part we replace most
  • Heat sinkCleaned and re-pasted. Some use liquid metal.
  • HDMI portBent pins and lifted ports need micro-soldering.
  • Power supplyDead consoles and clicking starts.
  • Disc driveWon’t read, won’t eject, or grinds.

What "no signal" actually means

Before any picture appears, the PS5 and the TV hold a short conversation. If any part of it fails, the TV shows “no signal” even though the console is running perfectly well.

  1. The TV reports. It tells the console what it can display.
  2. The console picks. It chooses a format it thinks will work.
  3. Keys are swapped. Both sides exchange copy-protection keys (HDCP).
  4. The link trains up. At 4K and 120 Hz, it’s trained up to HDMI 2.1 speeds.

The handshake fails when the cable can’t carry the bandwidth, a soundbar in the middle drops the keys, the TV input doesn’t support the format, or a damaged pin breaks a signal pair. Only the last needs a repair, which is why the steps above start with the free fixes.

HDMI cables compared

The labels look similar, but the bandwidth isn't. This is why a cable that worked on a PS4 can fail on a PS5.

Swipe to compare

High SpeedPremium High SpeedOur pickUltra High Speed
Bandwidth10.2 Gbps18 Gbps48 Gbps
1080p at 60 Hz
4K at 60 Hz with HDR
4K at 120 Hz
What to look for on the boxNo special labelPremium label with a QR codeUltra High Speed label with a QR code
SuitsOlder consoles, 1080pPS4 Pro, 4K streaming boxesPS5, PS5 Pro, Xbox Series X

Keep the cable as short as your setup allows. Long passive cables are the first to fail at full bandwidth, even with the right label.

Port, chip or setting: how to tell

The quickest test is whether a picture appears anywhere. From there, the port itself usually gives the answer.

  • Picture in Safe Mode or on a second TV

    The HDMI port and the chip behind it are passing a signal. The problem is a setting or the first TV.

  • Nothing anywhere

    No picture in Safe Mode, on two different screens, with the original cable, means the signal isn’t leaving the console. A torch shows bent or flattened pins, a crooked or loose port, or a cracked tongue.

  • Port looks perfect

    Suspect the HDMI encoder chip between the processor and the port, which converts the video signal for the TV. A power surge or a short from a damaged port tends to kill it. Summer thunderstorms around Canberra can do it, especially with the TV and console on a power board with no surge protection.

  • Picture comes and goes

    Flickering when someone walks past, or dropouts when the console is bumped, point to cracked solder joints or a port lifting from the board. Repair now is quickest and cheapest, before the copper pads underneath tear.

Your fixes compared

From free fixes to a bench repair, here's what each one actually solves.

Swipe to compare

Settings or TV fixNew HDMI cableHDMI port replacementHDMI chip repair
Safe to do at home
Fixes bent or loose port pins
Fixes a surge-damaged chip
Games and saves kept
Typical time10 minutesSame day1 to 3 business daysQuoted after testing
Relative costFreeLowMidHigher

Some consoles need a port and a chip together. We measure the signal lines before quoting, so you only pay for what has actually failed.

How PS5 HDMI ports get damaged

A damaged HDMI port comes off with hot air and flux, so the copper pads underneath aren't torn.
A damaged HDMI port comes off with hot air and flux, so the copper pads underneath aren't torn.

The port is soldered to the main board and built for straight-in, straight-out plugging. Most damage we see comes from the cable being levered while plugged in.

  • The console pulled forward to dust behind the TV unit, cable still connected
  • An upright PS5 on a badly fitted stand tipping over
  • A pet, a child or a vacuum cleaner catching the cable
  • Travelling to a friend’s place with the cable hanging out or attached in a bag
  • A heavy right-angle adapter or stiff, thick cable slowly working the port loose

What not to do

Solder joints on the new port are inspected under magnification before the console is tested at full resolution.
Solder joints on the new port are inspected under magnification before the console is tested at full resolution.

Some home fixes turn a straightforward port replacement into a much bigger job.

  • Don’t straighten pins with a needle or pin. They’re brittle, and one touching the metal shell can short the HDMI chip.
  • Don’t spray contact cleaner into the port. It doesn’t fix bent pins and can leave a residue that attracts dust.
  • Don’t keep plugging in a damaged port. Every insertion to “see if it works now” can bend more pins or tear more pads.
  • Don’t use the Reset PS5 options. They erase the console and do nothing for a hardware fault.

When to bring it in

Bring it in if there’s no picture on any screen with the original cable, the port looks damaged, the picture cuts out when the cable moves, or it died after a storm.

  • Bring the console and cable

    Tell us if anyone has already tried a repair, because torn pads change the job. If you need it back by a particular date, tell us when you book.

  • Check your warranty first

    If it’s still under Sony’s warranty, contact PlayStation support before anyone opens it. Physical damage such as a port pulled sideways may not be covered, but ask; the ACCC’s website explains your consumer guarantees.

  1. Rule out the TV. We test with a known-good TV and cable first.
  2. Find the fault. We inspect the port under the microscope and measure each signal line to the HDMI chip, so the quote covers the port, the chip or both.
  3. Prove the repair. It’s tested at the highest resolution and refresh rate the console can output, with HDR on, while the cable is flexed gently.

Common questions

Still stuck? Call 1300 224 027, 9 am to 8 pm, 7 days.

Why does my PS5 say no signal when the light is white?

A solid white light means the console has started properly, so the fault sits somewhere between the HDMI chip inside and your TV. In most homes that's the TV input, the cable, a soundbar in between or a video setting. If none of those fixes it and a second TV shows nothing either, the HDMI port or the chip beside it is the likely cause.

Will Safe Mode delete my games?

No. Starting Safe Mode deletes nothing, and neither do Change Video Output, Restart PS5 or Update System Software. Only Reset PS5 and Reset PS5 (Reinstall System Software) erase the console, so leave those two alone unless your saves are backed up.

Do I need a special HDMI cable for my PS5?

For 4K at 120 Hz, yes: an Ultra High Speed HDMI cable, which is the type that comes in the box. For 4K at 60 Hz a Premium High Speed cable is enough. If the trouble started after you swapped to a longer or cheaper cable, go back to the original.

My PS5 works on the TV but not through my soundbar. Why?

Many soundbars and AV receivers can't pass 4K at 120 Hz, HDR or the HDCP copy protection the PS5 sends. The tidiest fix is to plug the PS5 into the TV and send sound to the soundbar through the TV's eARC port. Setting HDCP Mode to HDCP 1.4 Only in Safe Mode also helps with older gear, but some streaming apps then won't play in 4K.

Can I straighten a bent HDMI pin myself?

Please don't. The pins are tiny and brittle, a straightened pin usually fails again, and a pin pushed against the metal shell can short the HDMI chip. Each time a damaged port is plugged in it can do more harm, so leave the cable out and book it in.

What about an Xbox with no signal?

The checks are the same: input, cable, a direct connection and a second screen. Xbox consoles also have a low-resolution start, the equivalent of Safe Mode's video reset: on a console with a disc drive, switch it off, then hold the Xbox button and the Eject button until you hear a second beep, about 10 seconds in. Xbox Support lists the button combination for digital-only consoles, which have no Eject button.

How much does a PS5 HDMI port repair cost?

We give you a fixed quote after testing. A straightforward port replacement costs less than a port plus an HDMI chip, and a port that has already been attempted at home, with torn pads, takes longer. Nothing starts until you approve the price.

Reviews from TechBox customers

Real Google reviews.

Excellent professional service- very prompt home visit, quick diagnosis of my computer problem and then it was fixed and returned to my house next day. I will certainly use this company again.

ironbark v., Google review

Duvi was excellent, very quick to identify my needs and to fix issues. Very Knowledgeable about Apple and Macintosh products . A very smart and focussed technician . I am very happy with his serviced happy to recommend him to anyone whinnied tech help.

Steve P., Google review

Tech Box saved the day!!!!!!!!!!! With my laptop on the brink of despair, I turned to Tech Box for help, and they delivered beyond expectations. Their expert team swiftly diagnosed and resolved the issue, displaying a level of professionalism that's truly commendable.

Gihani W., Google review

Still not fixed? We’ll take it from here

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online