Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

Home tech

Moving into a new home in Gungahlin, Molonglo or Ginninderry: the tech checklist

New suburbs come with fibre and empty rooms, which makes the first few weeks the easiest time to get the tech right. What to sort before moving day, before the furniture lands and in the first week.

8 September 2026. 4 minute read.

A Canberra suburban street in autumn with brick homes, a wide nature strip and red and gold street trees

Moving into a new home in Taylor or Throsby, Whitlam or Denman Prospect, Strathnairn or Macnamara usually means a fibre connection and a house full of empty rooms. Both are opportunities: it’s far easier to plan Wi-Fi, cameras and the home office before the couch and the moving boxes arrive. Here’s what to sort, roughly in order.

Before moving day: order the connection

Most new homes in Canberra’s growth areas have fibre to the premises, usually through the NBN. Some developments, particularly apartment buildings, use a different fibre network, so check which one serves your address first.

  • Order early. A few weeks before you move. Activation can be quick if the equipment is installed; a technician visit takes longer.
  • Ask your builder whether the fibre and the connection box are in place, and where the box is.
  • Check your modem. Fibre needs a router with an Ethernet internet (WAN) port. A VDSL modem from a fibre to the node suburb may not suit.

Plans and speeds

Find the connection box, then plan around it

A fibre connection has two parts: a small box on an outside wall where the fibre arrives, and the NBN connection box inside, which needs power.

  • Where the box is

    Often in the garage, the laundry or a hallway cupboard. In homes with structured cabling, it’s usually in a wall-mounted comms cabinet, with network cables running to rooms.

  • Where the Wi-Fi goes

    Your router plugs into one of the box’s data ports, but it doesn’t have to live in the garage. With data points, it can sit mid-house, cabled back to the box.

Want us to just sort it?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.

We only use your number to call you about this.

Before the furniture arrives: check the data points

Many new homes have data points in bedrooms, the study and behind the TV, cabled back to the comms cabinet. Check each one actually works.

Sometimes cables have been run but not terminated, or not patched to anything at the cabinet. A registered cabler can finish them, and it’s much easier while the rooms are empty.

  • Wired points for the TV, gaming console and home office desk
  • A mesh node or access point on a data point mid-house
  • Another node towards the far end
  • Furniture planned around the data points: moving a desk costs nothing, new cabling doesn’t

Plan the Wi-Fi while the rooms are empty

Foil-backed insulation and sarking, low-E double glazing and solid internal walls keep the heat in and block radio signals. A single router in the garage rarely covers a double-storey home.

  1. Walk the house. Before you unpack, use a phone and a Wi-Fi analyser app.
  2. Note the weak spots. Mark the rooms and corners where the signal drops.
  3. Place mesh nodes. Ideally connected by cable through the data points. Our mesh Wi-Fi guide explains the options.
  4. Check mobile coverage indoors. Energy-efficient glass can weaken mobile signal inside, even when it’s fine on the street.

CCTV, doorbells and smart locks

Plan cameras and locks early. New homes usually have months of visitors: fencing, landscaping, blinds and air conditioning.

  • Cameras

    Cover the front door, driveway and side gate. Wired PoE cameras, powered over network cable, are more reliable than battery or Wi-Fi ones, and a single-storey roof space usually makes cabling easy. Blocks are compact, so aim at your own property and use privacy masking where a view takes in the neighbours. See our home CCTV buyer’s guide.

  • Smart locks

    Some replace only the deadbolt, others the whole handle set. Make sure yours suits your door and has a physical key backup. Our smart home installation page covers doorbells, locks and the rest.

  • Tradie codes

    Give each tradie their own temporary code and delete it when the job is done.

  • Reset what the builder set up

    Change the garage door remote codes, the alarm code and anything the builder or a previous owner configured. Consider rekeying the locks, since you don’t know how many keys went out during the build.

Set up the home office properly

Plenty of people in Canberra’s new suburbs work from home part of the week, including public servants and contractors.

  • Wire the desk

    Plug into the data point if there is one, or put a mesh node in the home office.

  • Face the light

    For video calls, sit with the window in front of or beside you, not behind you.

  • Power and a UPS

    Have enough power points, with surge protection, and consider a small UPS to keep the router and computer running through short outages.

  • Your employer's rules

    If you handle government or client information, keep work devices off the family network and follow your organisation’s security requirements for home working.

If a new computer is part of the move, new computer setup gets your files, apps and printer working on day one.

The first-week list

Four quick jobs once you’re in. They close the obvious security gaps and save hunting around later.

  1. Change the defaults. The router’s admin password, and the Wi-Fi name and password.
  2. Separate smart devices. Put them on their own network if your router supports it.
  3. Register warranties. For new devices and appliances, while the boxes are still around.
  4. Write it down. Where the connection box, comms cabinet and data points are, for next time.

We help new home owners across Gungahlin, Molonglo Valley and Ginninderry with Wi-Fi, cameras and smart home setups.

Get it booked in today

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online