Getting your console ready for GTA VI: a pre-launch check
GTA VI lands on 19 November. Here's how to make room for the 212 GB pre-load, clear the dust, sort out HDMI and controller drift, get updates done early, and spot the signs your console needs a check before launch day.
11 November 2026. 4 minute read.

GTA VI arrives on PS5 and Xbox Series X|S on Thursday 19 November, eight days from today, and pre-loading opened on 10 November. If your console has been gathering dust since the last big release, get it ready this week, not on launch night. Here’s the check, in the order we’d do it.
Make room for a 212 GB pre-load
Rockstar says the pre-load needs 212 GB free: a big slice of the original PS5’s 825 GB drive, and well over half the game space on a 512 GB Series S.
Leave headroom for patches.
- PS5. Settings > Storage > Console Storage > Games and Apps. Delete what you’re not playing (you can download it again later), and check Media Gallery clips.
- Xbox. Settings > System > Storage devices shows each drive; manage individual games from My games & apps.
- Saved games. Xbox saves sync to the cloud automatically, and PS Plus members can keep PS5 saves in cloud storage. Check before deleting anything you care about.
Short of space for good
| PS5 | Xbox Series X and S | |
|---|---|---|
| Internal expansion | M.2 NVMe SSD, PCIe Gen4, with a heatsink meeting Sony’s size and speed requirements | The official Storage Expansion Card, which plays games like the internal drive |
| USB drive | Stores games, but they must move back to internal storage to play | Stores games, but they must move back before you can play |
Fitting a PS5 SSD is a small screwdriver job, Sony’s instructions are clear, and the drive requirements are on PlayStation’s support site. If you’d rather not, ask us when you book a console check.
Clear the dust and give it some air
A big open-world game runs a console hard for hours, which is exactly when a dusty or boxed-in console starts to struggle.
- Power down. Turn the console fully off, unplug it and vacuum the outside vents on low suction.
- Open up a PS5. Take the covers off and vacuum the dust catchers and fan grille behind them.
- Check stored consoles. Out of a cupboard, garage or shed? Look into the vents for dust, fluff and the odd spider first.
- Give it space. At least 10 cm from the wall, as Sony recommends, out of closed cabinets and off carpet.
Our console overheating guide covers placement and safe cleaning for PS5, Xbox and Switch in more detail.
Want us to just sort it?
Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.
Check the HDMI connection
Picture and sound faults are common after a console has been moved, and launch week is a bad time to find one.
Use the cable from the box
The PS5 and Xbox Series X ship with Ultra High Speed HDMI cables that handle 4K at 120 Hz. An older cable may limit the picture or cause dropouts.
Use the right TV input
On many TVs, only some HDMI inputs support 4K at 120 Hz and variable refresh rate. Check the TV’s labels or manual, and turn on game mode.
Leave slack
A tight cable levers the port every time someone bumps it.
Unplug before moving
Moving the console with the HDMI cable still plugged in is one of the most common ways ports get damaged.
Sort out controller drift
Drift is when your character walks or the camera turns without you touching the stick. It’s wear inside the thumbstick module, common on DualSense, Xbox and Joy-Con controllers after years of heavy use.
- Update the controller. PS5 controllers update through the console; Xbox controllers through Settings or the Xbox Accessories app.
- Raise the dead zone. Many games let you increase it in settings, which can hide mild drift.
- Charge everything. Every controller you’ll use, spares included.
If drift ruins aiming or driving, the thumbstick module can be replaced, which often costs less than a new controller.
Get updates done early
On launch night, everyone downloads at once. Get the system update, the pre-load and your settings sorted now.
System software and pre-load
Update the console and restart it. Start the pre-load today if you haven’t, and leave the console in rest mode overnight to finish.
Power settings
On PS5, Settings > System > Power Saving: stay connected to the internet in rest mode. On Xbox, check the power options so updates download while it’s off.
The connection
Ethernet is far more reliable for a big download than Wi-Fi across the house. If the console is far from the modem, mesh Wi-Fi or a cable run helps.
When to book a console check
Book it in this week if you notice any of these. Now leaves time for a clean, a part or a second look before 19 November; launch week means queuing with everyone else.
- The fan roars in menus or simple games
- It has shut down mid-game
- A warning says the console is too hot
- The picture cuts out, flickers or won’t appear
- The disc drive grinds, rattles or won’t take a disc
- A controller drifts or a button sticks
Book it in at Mitchell
Our Mitchell workshop repairs PS5, Xbox and Nintendo Switch consoles, with a fixed quote before any work starts and many common faults fixed the same day.
Call 1300 224 027, 9 am to 8 pm, 7 days.
Related services

Console repairs
No picture, a console that shuts itself down, a disc drive that won't read or a controller that drifts.

PS5 overheating
Your PS5 switches off mid-game, the fan roars or it warns you that it's too hot.

Console HDMI ports
The console powers on but the TV says no signal, the picture flickers or the port feels loose.
Get it booked in today
Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.
1300 224 027Calls answered 9 am to 8 pm, 7 days.
- Quote before any work starts
- Workshop in Mitchell, visits across Canberra
- If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”



