Repairs
Business IT
Starlink
Home
Call 1300 224 027Book a repair

Open 7 days, 9 am to 8 pm

Repairs

Signs your hard drive is failing, and what to do first

Hard drives and SSDs fail in different ways. Here are the warning signs for each, how to check a drive's health in Windows and macOS, and the first steps that protect your data instead of putting it at more risk.

14 October 2026. 5 minute read.

A spinning hard drive with its cover off showing the platter and read arm, a backup drive beside it, dramatic side light

Drives rarely fail without warning, but the signs are easy to miss or put down to a slow computer. Acting on them straight away is often the difference between copying your files off in an afternoon and a much harder recovery.

How drives fail

Hard drives and SSDs are built differently, so they wear out differently and give different warnings.

  • Hard drive (HDD)

    A read-write head floats just above metal platters spinning thousands of times a minute. Over time the surface develops bad sectors, the heads wear and the bearings tire.

  • Solid-state drive (SSD)

    Flash memory chips managed by a controller, with no moving parts. Cells wear out after a very large number of writes, and the drive tracks and works around that wear.

A knock while a hard drive is running, common with laptops, can damage the heads or platters instantly. When an SSD fails, it’s often the controller or firmware, and that can happen suddenly.

The warning signs

Noises, slowdowns and errors are the usual clues. Some mean switch off straight away.

From a hard drive

  • Beeping, or not spinning up: a stuck or failing motor
  • Much slower over weeks, with long pauses opening files
  • Freezes while the drive light stays on
  • Files that won’t open, corrupted photos, missing folders
  • Repeated disk checks or repair messages at start-up
  • A “no bootable device” message on a PC, or a flashing question-mark folder on a Mac

From an SSD

  • Sudden freezes, crashes or restarts, sometimes with an error about the boot device.
  • Errors when saving, or a drive that turns read-only. Some SSDs do this at end of life to protect the data on them.
  • The drive disappearing, then coming back after a restart.
  • A falling health figure in a drive health tool, or rising error counts.

Because SSD failures often give less warning, regular backups matter even more on a computer with an SSD.

Want us to just sort it?

Leave your number. A technician calls back 9 am to 8 pm, 7 days, with a price range for your model.

We only use your number to call you about this.

How to check a drive's health

Most drives monitor themselves with SMART (Self-Monitoring, Analysis and Reporting Technology), tracking replaced and pending sectors, read errors and, on SSDs, how much rated wear is used.

  • Windows

    Windows 11 shows the health of NVMe SSDs under Settings, then System, then Storage, then Advanced storage settings, then Disks & volumes; choose the drive and open its properties. For other drives, a free tool such as CrystalDiskInfo shows SMART details for every drive.

  • Mac

    Open System Information and look under Storage or NVMExpress. Each internal drive shows a S.M.A.R.T. status of Verified or Failing.

What to do first

If you notice any of these signs, these steps protect your data instead of putting it at more risk.

  1. Stop using it for anything non-essential. Every hour of use adds wear to a failing drive and can write over space where deleted files might still be recoverable.
  2. Clicking, grinding or beeping? Switch it off and leave it off. Restarting a physically failing drive can scratch the platters and make recovery harder, or impossible.
  3. Still working? Copy irreplaceable files first. Photos, documents and business records, to an external drive or the cloud. A failing drive may not survive a full backup.
  4. Find your encryption recovery key. BitLocker or FileVault drives need it or your password, especially if the computer won’t start. BitLocker keys are often in your Microsoft account.
  5. Get advice before trying anything else. A quick assessment shows whether it’s a simple copy or specialist recovery.

And what not to do

  • Don’t run repair tools such as CHKDSK or repeated Disk Utility repairs on a drive with physical symptoms. They write to it and work it hard.
  • Don’t install recovery software on the failing drive.
  • Don’t open it. Drives are assembled in clean rooms, and one speck of dust on a platter can destroy data.
  • Don’t freeze it or tap it. These old tricks cause more damage than they fix.

Logical and physical recovery

Recovery falls into two broad types. We’ll assess the drive, tell you which it needs and quote before anything goes ahead.

  • Logical recovery

    For drives that work mechanically but lost files through deletion, formatting or a corrupted file system. Usually quicker and less expensive.

  • Physical recovery

    For failed heads, motors or controllers, or damaged platters. It needs specialist equipment and more time.

Nobody can honestly promise a result before assessing a drive, but the sooner a failing drive is switched off and brought in, the better the outcome usually is.

Make the next failure boring

Every drive fails eventually, and a good backup turns a failure into an inconvenience.

  • Windows. OneDrive for your Documents, Desktop and Pictures folders, plus File History to an external drive.
  • Mac. iCloud Drive and iCloud Photos, plus Time Machine to an external drive.
  • Test it. Every few months, open some files from the backup to check it works.

For businesses, our backup and disaster recovery service sets up and monitors backups across the team.

A laptop, an external drive and the cloud each holding a copy of the same data, with one copy kept off-site
A 3-2-1 backup keeps three copies of your data on two different kinds of storage, with one copy somewhere else, such as the cloud or a drive kept off-site.

Drive trouble? Talk to us

Seeing any of these signs? Bring the computer to our Mitchell workshop or call 1300 224 027, switching it off first if the drive is making noises.

We’ll check it, copy your data off if it’s readable, and replace the drive, often with an SSD that makes the computer quicker too.

Get it booked in today

Call now, or send a ticket and we’ll call you back with a time and a price range. Drop it at Mitchell or we come to you.

1300 224 027

Calls answered 9 am to 8 pm, 7 days.

  • Quote before any work starts
  • Workshop in Mitchell, visits across Canberra
  • If something isn’t right, we come back and make it right.
“Great friendly service, on time to solve the problem”
Bruce W., Google review

Start a repair ticket

Tell us what’s wrong. We’ll call you back with a time and a price range.

Repair ticketTB-·····

What needs fixing?

What happens next

  1. A technician calls you back, 9 am to 8 pm, 7 days. Sent after 8 pm? We call from 9 am.
  2. You get a price range and a time for your model.
  3. Nothing starts until you say yes.

Open 7 days, 9 am to 8 pm
Prefer to talk? Call 1300 224 027. We only use your details to answer this request.

Open 7 days, 9 am to 8 pm

Call nowBook online